Air Emissions Equipment For Air And Climate Available In Canada
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
GA-5000DN is based on a tunable semiconductor laser absorption spectroscopy (TDLAS) technology principle, including three parts: pretreatment, gas analysis module and data processing and display. After dedusting by sampling probe, tracing by heating pipe, the measured gas is analyzed by the hot gas analysis module (TDLAS technique). It is an effective solution to the technical problem that ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
ESE-LASER-100P The portable laser gas analyzer is composed of a gas analyzer main unit, an integrated heat tracing line, and an extendable probe. The sample gas is sampled and analyzed by a high-temperature heat extraction technique. Under the action of the sampling pump, the gas to be tested enters the gas analyzer main unit to analyze the gas chamber through the front-end filter element and the ...
-
PremiumManufactured by For.Tec. Forniture Tecnologiche S.r.l.based in ITALY
Our ovens mod. T-BULL are designed to meet the need for immediate mobility and ease of use. Once reached the place of use, it takes 10 minutes for positioning and the oven is ready for steady operation. The entire system is installed on a sturdy steel preassembled skid and equipped with hooks for handling; on the structure are firmly secured: incinerator with postcombustion chamber for reducing ...
-
PremiumManufactured by ENVEAbased in FRANCE
Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), enhanced by proprietary technology, is used for the measurement of ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 certified by the TUV following EN 14662-3 for benzene monitoring. Standard measured compounds: Benzene, Toluene, Ethylbenzene, m+p-Xylene, o-Xylene, 1-3 Butadiene (up to 40 other compounds on ...
-
PremiumManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
The mobile heavy-duty screener is durable, powerful and with high-performance and a huge capacity. It is capable of screening and separating a wide range of materials in complex and high-demanding applications, such as concrete, asphalt, construction & demolition waste, and quarry, ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Temperature ELPI+ (Electrical Low Pressure Impactor, HT-ELPI+) is a unique version of the Dekati ELPI+ that enables real-time measurement of particle size distribution from 6 nm up to 10 μm with 10 Hz sampling rate. The High Temperature ELPI+ allows direct measurement of up to 180 °C high temperature aerosol samples without the need to cool the sample, which makes the ...
-
PremiumManufactured by For.Tec. Forniture Tecnologiche S.r.l.based in ITALY
Our waste incinerators mod. ROTOMAC are rotary or oscillating combustion chamber furnaces, which are suitable for the incineration of almost all types of solid and liquid waste such as whole animals, slaughtering waste and generic organic waste but also hazardous and not-hazardous hospital waste and generic industrial ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
SpectroTRACER is a continuous operating measurement system for nuclide specific detection of even lowest level gamma contamination in air (SpectroTRACER-Air/Soil) and in liquids (SpectroTRACER-Aqua). The probe performs spectroscopic analysis of the measurement in order to identify the detected radionuclides. SpectroTRACER is used for radiation monitoring when a standard gamma dose rate monitor is ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Principle : ESE-LASER-HCL-200P Portable laser gas analyzer using a Tunable Diode Laser Absorption Spectroscopy (TDLAS), the realization of the non-contact measurement in high temperature, high pressure, high dust and other harsh test conditions. High selective laser based on frequency, analyzer has good performance of anti interference. compared to the traditional analysis method, reducing the ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Widely considered to be the most energy-efficient oxidizer, Anguil's Regenerative Thermal Oxidizer (RTO) uses ceramic media to recover upwards of 97% of the available energy. What makes our RTO so popular is its ability to repurpose the thermal energy generated during operation to reduce operating costs and energy consumption of the system itself. The regenerative component makes it capable of ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The use of the measuring principle of dynamic pressure and PT100 assures a device which is easy in design and operating as well as the real-time monitoring of the measuring parameters. The operating and display unit is integrated in the probe head. On the high-quality display all measuring values, status information and parameters are displayed. Furthermore, a real-time display as line diagram is ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Ammonia analyzer (NH3) at ppm level Ambient air and Emission ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Ammonia is a gas that easily dissolves into water, there are several common detection methods,but ammonia is toxic and corrosive, the current measurement mainly uses the TDLAS direct measurement method. TDLAS is essentially a spectral absorption analysis technology, which uses the selective absorption characteristics of gas molecules for specific wavelength lasers, and analyzes the changes in the ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Sekidenko OR4000E delivers precision temperature measurement, using active-emissivity compensation for accurate measurement and control under changing-emissivity conditions. Configurable wavelength based on material type and required temperature range. Multi-channel measurement capabilities using remote lensed optical sensors or sapphire light pipes for in-situ measurement. Both analog and ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS CEM systems measure multiple emissions or process gases in real time in situ. Using the DOAS (Differential Optical Absorption Spectroscopy) technique, the system is non-contact, with fast ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati PM10 Impactor is a three-stage cascade impactor for determining particle gravimetric mass size distribution. The operating principle of the Dekati PM10 impactor is based on inertial size classification and gravimetric or chemical analysis of the collected, size classified particle samples. This impactor has cutpoints of 10, 2.5 and 1 μm making it an ideal choice for PM10, PM2.5 and ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Permanent Total Enclosures (PTEs) provide numerous advantages for manufacturers who paint, spray, coat or apply solvent based materials to their product. The primary function is to provide 100% capture of all fugitive over-spray of harmful air pollutants used within the enclosure, maximizing the capture and control efficiency of the facility. This results in fewer uncontrolled emissions being ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DMS-200 dust monitor is a self-developed probe-in monitor, based on years of research on dust detection technology. Different from traditional back scattering dust monitor (such as DMS-100/MS-1000), DMS-200 installs a dust measurement module at the top of the probe, which directly stretches into the stack for dust measurement in close distance and it adopts laser forward scattering method to ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The use of the measuring principle of dynamic pressure and PT100 assures a device which is easy in design and operating as well as the real-time monitoring of the measuring parameters. The operating and display unit is integrated in the probe head. On the high-quality display all measuring values, status information and parameters are displayed. Furthermore, a real-time display as line diagram is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you