Air Emissions Equipment For Air And Climate Available In USA
-
PremiumManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
Advanced technology, reliability, high effiffifficiency and yield, smart control, compact design, easy relocation, and convenient maintenance. It's widely applied in construction and demolition projects, mine shredding, s and, stone, and aggregate ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Ammonia is a gas that easily dissolves into water, there are several common detection methods,but ammonia is toxic and corrosive, the current measurement mainly uses the TDLAS direct measurement method. TDLAS is essentially a spectral absorption analysis technology, which uses the selective absorption characteristics of gas molecules for specific wavelength lasers, and analyzes the changes in the ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Permanent Total Enclosures (PTEs) provide numerous advantages for manufacturers who paint, spray, coat or apply solvent based materials to their product. The primary function is to provide 100% capture of all fugitive over-spray of harmful air pollutants used within the enclosure, maximizing the capture and control efficiency of the facility. This results in fewer uncontrolled emissions being ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
The use of lime for treating flue gases is a proven technology. Flue gas is generated from the thermal treatment process in Energy from Waste plants (EfW) and contains acidic gases such as hydrogen chloride, sulphur dioxide and hydrogen fluoride. The use of lime in the three main flue gas treatment processes of; dry, semi-dry and wet processes shows its flexibility and adaptability in its ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Gravimetric Impactor (DGI) is a high sample flow rate cascade impactor for low concentration particle measurement applications. The DGI measures gravimetric particle mass size distribution of particles < 2.5 μm in five size fractions. Typical measurement applications of the DGI impactor include engine emission measurements, air quality studies and other low concentration ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The zero gas generator provides clean and dry zero-level air. It is mainly applied to zero calibration of ambient air quality monitoring system or analyzer. It can also be used as flushing gas in permeation tube & furnace and oxidant gas for FID analyzer. Zero gas generator includes external oil-free air compressor, pressure and flow controller, water removal system. Based on adsorption, ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
The B85 is a 3 inch self-priming centrifugal pump suitable for pumping dirty water with solids up to 40 mm. This single-cylinder diesel driven pump on a galvanized wheelbarrow frame is used around the world in a variety of applications. A small mobile diesel pump for the construction, rental and agricultural markets. Pump flow up to 90 m³/h, Maximum total head 16 ...
-
PremiumManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
The mobile heavy-duty screener is durable, powerful and with high-performance and a huge capacity. It is capable of screening and separating a wide range of materials in complex and high-demanding applications, such as concrete, asphalt, construction & demolition waste, and quarry, ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
WL Range: 190 – 900nm. WL Accuracy: ≤±0.5nm. WL repeatability: ≤0.3nm (single direction). Spectrum bandwidth: 0.2nm, 0.4nm, 0.7nm, 1.4nm, 2.4nm, 5.0nm. Resolution ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Monitoring single toxic hydrocarbons for the industrial applications. Synspec Delta 100 and Delta 300 analysers are gas chromatographs (GCs) built specifically for the industrial applications to ensure worker safety, emissions and process control. Depending on what component and its concentration you need to measure, our team will develop and install an appropriate detector, columns, sample ...
-
PremiumManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
Advanced technology, reliability, high efficiency and yield, smart control, compact design, easy relocation, convenient maintenance, It's widely applied in construction and demolition projects, mine s h red ding, sand,stone and aggregate ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS CEM systems measure multiple emissions or process gases in real time in situ. Using the DOAS (Differential Optical Absorption Spectroscopy) technique, the system is non-contact, with fast ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Principle : ESE-LASER-HCL-200P Portable laser gas analyzer using a Tunable Diode Laser Absorption Spectroscopy (TDLAS), the realization of the non-contact measurement in high temperature, high pressure, high dust and other harsh test conditions. High selective laser based on frequency, analyzer has good performance of anti interference. compared to the traditional analysis method, reducing the ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DMS-100/MS-1000 is a self-developed online dust analysis product and a dust particle measuring device, adopting laser backward scattering measuring technology with imported core components. The DMS-100/MS-1000 dust particle measuring device is mainly used for continuous monitoring of PM emission concentrations of various pollution sources. The DMS-100/MS-1000 dust particle measuring device can be ...
-
PremiumManufactured by For.Tec. Forniture Tecnologiche S.r.l.based in ITALY
Our waste incinerators mod. ROTOMAC are rotary or oscillating combustion chamber furnaces, which are suitable for the incineration of almost all types of solid and liquid waste such as whole animals, slaughtering waste and generic organic waste but also hazardous and not-hazardous hospital waste and generic industrial ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Sekidenko OR4000E delivers precision temperature measurement, using active-emissivity compensation for accurate measurement and control under changing-emissivity conditions. Configurable wavelength based on material type and required temperature range. Multi-channel measurement capabilities using remote lensed optical sensors or sapphire light pipes for in-situ measurement. Both analog and ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
GA-5000DN is based on a tunable semiconductor laser absorption spectroscopy (TDLAS) technology principle, including three parts: pretreatment, gas analysis module and data processing and display. After dedusting by sampling probe, tracing by heating pipe, the measured gas is analyzed by the hot gas analysis module (TDLAS technique). It is an effective solution to the technical problem that ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DMS-200 dust monitor is a self-developed probe-in monitor, based on years of research on dust detection technology. Different from traditional back scattering dust monitor (such as DMS-100/MS-1000), DMS-200 installs a dust measurement module at the top of the probe, which directly stretches into the stack for dust measurement in close distance and it adopts laser forward scattering method to ...
-
PremiumManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
The Mobile tracked screener provides the end user with a high output of finished products In sand and gravel, aggregate recycling, top soil and coal mining applications. Up to 5 sizes of material can be produced simultaneously, thus giving the user considerable added value. Easy to transport. Quick to set up. Easy to operate and ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The use of the measuring principle of dynamic pressure and PT100 assures a device which is easy in design and operating as well as the real-time monitoring of the measuring parameters. The operating and display unit is integrated in the probe head. On the high-quality display all measuring values, status information and parameters are displayed. Furthermore, a real-time display as line diagram is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you