Only show results in Connecticut? Ok

Air Filter Monitor services for Air and Climate

  • Premium

    Painting & Coating Solutions

    Whether your focus is aesthetics quality control or corrosion protection, surface-prep dust can wreak havoc on your coating and painting processes. Add the impact of conventional industrial spray booths on intermittent applications and material handling, and you have a recipe for the bottom-line blues.

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA). from Solutions Service line

  • Hot Mix Asphalt Facilities Services

    Multiple compliance test programs have been performed throughout the Mid-Atlantic and New England region for various hot mix asphalt (HMA) facilities outfitted with asphalt batch plants and drum mix plants. These test programs were performed for eight different manufacturers. Aside from the typical total particulate and opacity testing the ...

    By Gammie Air Monitoring LLC based in West Simsbury, CONNECTICUT (USA). from Industry Services Service line

  • Fabric Filter & Element World Markets

    Fabric Filters (often called baghouses) are utilized to purify the air discharge from industrial stacks. The textile or membrane bags which do the filtration are periodically replaced. Applications small flows such as welding and pharmaceutical drying to large flows such as from coal fired boilers. This report identifies and quantifies ...

    By The McIlvaine Company based in Nothfield, ILLINOIS (USA). from Air Pollution Control Service line

  • Controls and Maintenance Services

    Controls enable to be sure of an unchanged classification of installations and equipments, according to standards (ISO 14644).EREA controls and maintains your aeraulic equipments thanks to skilled technicians listening to you.

    By Erea S.A.S based in Peronne, FRANCE.

  • Installation and Maintenance Services

    Pliotron filters follow the same basic installation process as disposable filters: Begin by finding your furnace’s filter air box, located between the return duct and your furnace which is usually at the bottom of the system. Check the size of your filter air box (most filters give their dimensions on their sides) and confirm that your ...

    By Pliotron Company of America LLC based in Niagara Falls, NEW YORK (USA).

  • Preventative Maintenance

    All mechanical equipment requires some maintenance at some point. This can be done as preventative maintenance, or as emergency repairs (see above). We believe that a quality preventative maintenance plan is the best method of keeping your equipment working and keeping your overall operation and maintenance (O&M) costs low. Oxidation Tech will ...

    By Oxidation Technologies, LLC based in Inwood, IOWA (USA).

  • Cleanroom service

    Cleanroom technology is the foundation for highly sensitive areas in modern manufacturing – for example, in pharmaceutical production, biotechnology or chip manufacturing for the electronics industry. Users of cleanroom equipment must be able to demonstrate by means of continuous checks that the applicable standards and guidelines are being ...

    By Weiss Umwelttechnik - Schunk Group based in Reiskirchen-Lindenstruth, GERMANY.

  • System Support Services

    Eternal Sun is committed to helping you acquire the most accurate test data. That is why we offer an annual maintenance service.

    By Eternal Sun B.V. based in The Hague, NETHERLANDS.

  • Air Filtration Engineering Services

    Fumex Inc. has a dedicated engineering and design staff with 20+ years of industrial air filtration experience. We are available to assist in application review and custom air filtration system design. 

    By Fumex, Inc. based in Kennesaw, GEORGIA (US) (USA).

  • Assembly Services

    Segments are placed in fixtures by a robot. Cement is injected into voids between segments to form the seam. Injection of cement by compressed air. Min. distance between segments is ensured by spacers. Cement is dried with hot air. Outer diameter mechanically controlled by fixture.

    By Notox A/S based in Svendborg, DENMARK.

  • Maintenance Services

    Schust Engineering provides regularly-scheduled preventive maintenance inspection service to keep the air pollution control systems in your plant running as intended.

    By Schust Engineering, Inc. based in Auburn, INDIANA (USA).

  • Medical Filter Testing Services

    A range of testing services available for consumer filtration products, including: Motor Emissions, Filter Retention Efficiency, Internal Seals, HEPA Ratings, MERV Ratings, Clear Air Delivery Rates (CADR).

    By IBR Inter Basic Resources Inc. based in Grass Lake, MICHIGAN (USA).

  • Vacuum, Room Air and Furnace Filters

    Testing of Vacuum Cleaners, Furnace Filters and Room Air Cleaners For:. Motor Emissions. Filter Retention Efficiency. Internal Seals. HEPA Ratings. MERV Ratings. Clean Air Delivery Rates (CADR).

    By IBR Inter Basic Resources Inc. based in Grass Lake, MICHIGAN (USA).

  • Biofilter

    Bioaction Odour Biofilter FiltaOdor is a compact and modular design providing sustained and efficient biological odour control. It removes and destroys H2S, organic odours and VOCs at a lower overall cost compared to any other commercially available destruction or treatment technology. The design optimises the bio-degradation process through the ...

    By Bioaction Pty Ltd. based in Tuggerah, AUSTRALIA.

  • China 2006-2012 Media Filtration Report

    China has the largest filter media market for baghouse filtration . This market will grow rapidly through 2012.

    By The McIlvaine Company based in Nothfield, ILLINOIS (USA). from Air Pollution Control Service line

  • Intervention Services

    CETCO’s Intervention Services product line, can be used across a wide range of applications that require fluid transfer and/or injection at variable pump rates and pressures. The highly flexible fluid injection system integrates bulk and multi-line NAS filtration for the most “solid” sensitive applications. The system is designed ...

    By CETCO Energy Services based in Covington, LOUISIANA (USA).

  • Operation & Maintenance of EMS Service

    Water & Waste Water Treatment Plants (ETP, CETP, STP). Air Pollution Control Equipments like Ventury Scrubbers, Wet Scrubbers, Bag-filters. Electro – static Precipitators (ESP), Multi-Cone Cyclone Separators All type of Incinerators.

    By Bhagwati Enviro Care PVT. LTD based in Ahmedabad, INDIA.

  • Coshh Lev Testing Services

    The Health and Safety at Work Act places a duty on employers to protect employee’s health, safety and welfare. C.O.S.H.H. (Control of Substances Hazardous to Health) is part of this Act and places a duty on employers and employees to ensure that the exposure to hazardous substances is: - ‘preferably prevented’ or otherwise ...

    By Indusvent based in Rochdale, UNITED KINGDOM.

  • Testing Services - Testing and Certification of Horizontal Laminar Airflow Hoods

    MASARAT for ACCREDITATION tests and certifies Horizontal Laminar Airflow Hoods to appropriate international standards (NSF/ANSI 49) or manufacturer specifications on visit by visit basis. All associated cost (HEPA filter replacement, extra visits, parts or repair) will be quoted separately . MASARAT can perform the following tests: ...

    By Masarat for Accreditation based in Riyadh, SAUDI ARABIA.

  • System Design & Turn Key Solutions

    We have been developing bespoke solutions for our clients since our inception in 1979. As a consequence, we have a wealth of experience in the design and manufacture of custom systems for industry, the medical profession and research institutions.

    By 3D Digital Design & Development Ltd based in London, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you