Only show results in Virginia? Ok

Air Filtration Applications

  • Diesel Air Filter Cleaning

    HOW THE GREEN FILTER CLEANING MACHINE WORKS Easy to load, automatic and programmable cleaning cycles, filters cleaned in 3 to 5 minutes. Dry compressed air cleans filters from the inside out. Pollutant dust is safely captured with our powerful cyclone collector than safely stored in a supplied 55gal drum. Filter Inspection Station available, recommended for air intake filters used in Diesel Engines, measure restriction levels of air filters to confirm filters integrity Filter Inner Diameter: 6.5` Minimum for inner Diameter Filter Outer Diameter: 20` Maximum for outer Diameter Filter Height: Up to 32` High – closed one end or open at both ends (Other sizes Available – Contact Mfg. For Details) Injection Cleaning System HOW THE INJECTION SELF-CLEANING SYSTEM (ICS) WORKS The Injection Self-Cleaning System releases compressed shop air through a rotating air jet that is driven up and down in a spiral motion inside the filter cartridge. In order to maintain the cabinet clean, an air pu

    By DiversiTech based in Montreal, QUEBEC (CANADA).

  • Cement mill, stone crusher dust filtration

    ECOGRACE bag filter bags is effective for filtration for cement mill, stone crusher,ect

    By Zhejiang Grace Envirotech Co., Ltd based in XIAOSHAN, CHINA.

  • Nomex filter bags for asphalt mixing site dust filtration

    Nomex filter bag for higher temperature dust filtration ,widely applied in Asphalt mixing plant ,Kiln smoke in cement plant ,steel plant blast furnace smoke and so on. NOMEX filters offer one of the best total economies in a filtrationsystem because of higher air to cloth ratios, higher temperaturecapability, and a long wear life.

    By Zhejiang Grace Envirotech Co., Ltd based in XIAOSHAN, CHINA.

  • Mobile Sewage Treatment for the Oil and Gas Industry

    Due to the continued growth in the oil & gas industry, we are seeing an increased demand for mobile sewage treatment solutions for oil exploration and drilling rigs in remote locations.

    By Nomadic Systems based in Langley, BRITISH COLUMBIA (CANADA).

  • Soil and groundwater protection in the petroleum industry

    Bristar Containment Industries has been serving Environmental Protection in the Upstream Petroleum Industry for 15 years. Prevention of soil and groundwater damage is preferred to clean up after the fact.

    By Bristar Containment Industries Ltd. based in Wimborne, ALBERTA (CANADA).

  • GIS software for petroleum industry

    For years, petroleum companies have used Esri`s GIS to decide where to drill a well, route a pipeline, build a refinery, and reclaim a site. Today`s GIS provides oil and gas industry solutions throughout the petroleum life cycle. All major oil companies in the world use Esri`s GIS technology to manage their location-based information, from leases, wells, and pipelines to environmental sites, facilities, and retail outlets.

    By Esri based in Redlands, CALIFORNIA (USA).

  • Environmental technology for gas cleaning industry

    For many decades now Körting gas scrubbing plants have distinguished themselves in diverse branches of industrial exploitation with great success. The principle components of these plants are the: The conversion of basic process engineering oparations for the exchanging of heat and materials such as cooling, physical and chemical absorption and dedusting permit separation and recovering of gaseous, liquid and solid materials from gases.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Asphalt Mixing Smoke Filtration

    Nomex Filter Bags Application:    Nomex Filter Bags is mainly used in cement industry, asphalt industry, metallurgical industry,steel mill and tobacco industry for flue gas purification. Performance:    Nomex Filter Bags continuous operating temperatures is up to 200°c, instant service temperature is up to 240°c.     Nomex Filter Bags fire retardant performance is excellent,    Corrosion resistance and alkali resistance is good,    Excellent thermal stability, excellent abrasion resistance and flexural resistance. Hydrolysis resistance is poor, when SOx and vapor in flue gas or dew point is frequent, it would greatly reduce its service life.

    By Zhejiang Grace Envirotech Co., Ltd based in XIAOSHAN, CHINA.

  • Innovative pump technology for oil and gas industry

    Medium-specific solutions, equipped with oil and gas tested materials and components, dimensioned for each application. Our engineers have the task of finding an energy-efficient, safe and powerful EDUR solution for this.

  • Painting & Coating

    Paint fumes are Unbreathable. Spray Painting VOCs and Powder Coating dust are both harmful pollutants which are produced during painting operations. The volatile organic compounds (VOCs) emitted from paint can cause respiratory issues and require proper ventilation to remove harmful gasses from the work area. Powder Coating lines and spray painting produce dangerous fumes and dusts which need to be filtered or exhausted outside your facility. Industrial coatings and chemicals can produce toxic VOCs and foul odors which can effect worker`s health and reduce productivity. Some of the most common coatings are polymers which include polyurethane, epoxy and moisture-cure urethane. Many different industries required the use of glues, adhesives, solvents and different chemical agents in their production process, but are unsure of the best way to handle this nuisance. Exhausting fumes outside may be an option when VOCs are extremely dangerous and odorous but companies must also comply with EPA guidelines which regulate which gases can be emitted. In cold climates and in air-conditioned facilities, capturing, filtering and recirculating fumes can provide huge energy savings preventing costly heat loss and energy intensive air makeup systems. Utilizing activated carbon granules can allow operators to filter VOCs and odors from painting and cutting applications. Different quantities and types of carbon modules are required depending upon the contaminant. Contact Diversitech with an MSDS sheet detailing your chemical`s characteristics for an evaluation of your workplace air quality problem.?

    By DiversiTech based in Montreal, QUEBEC (CANADA).

  • Odour removal units for professional kitchen ventilation

    Our company has odour removal units for professional kitchen ventilation, for grills and food preparation areas generally. The operation of the unit is based on chemical or electrostatic filters or a combination of both. The kitchen unit KDSA (with chemical filters) series, neutralizes particles, soot, odors, grease and moisture completely. KDSA units for kitchen ventilation are installed in the cooker hood and are connected with the kitchen areas that produce smoke or where there is smoke and odors such as in kitchen funnels or in washing facilities. The air stream in the deodorizer passes through a set of filters where particles, grease, soot and odors are removed.

    By Dimtech S.A based in Keratsini, GREECE.

  • Ceramic membrane filter

    Nanjing Tangent Fluid Technology Co., Ltd, a high-tech company for liquid separation in process industry, has cooperations with domestic institutes and European famous membrane companies for membrane technology.Tangent Fluid has a manuafaturing plant and R&D center in Nanjing, where we can design and manufacture filtration equipments of Microfiltration/Ultrafiltration/ Nanofiltration /Reverse Osmosis, and make research and development for new process and technology based on membrane process. Tangent Fluid has also invested to another modern producing plant in Shanghai for ceramic membranes production,with a whole set of equipment like Vacuum Pugmill, Extruder, Oven, Full Automatic High Temperature Furnace, and Testing Machines. All raw material is high quality from domestic and abroad porus ceramic membrane filter with first grade quality could be manufactured under our unique technic and strict quality control system.

    By Nanjing Tangent Fluid Technology Co., Ltd. based in Nanjing, CHINA.

  • High performance separation system for ethylene industry

    Fundamental building block chemical used in the production chain of polyethylene, PVC, styrene, ethylene glycol, vinyl acetate, linear ∂-olefins and a host of other chemical products. Eliminate hydrocarbons in Quench Water system, minimize fouling, provide greater system reliability, lower maintenance, lower energy costs. Quench water contains emulsified heavy aromatic hydrocarbon (SG = 0.975). Cracked hydrocarbons are extremely reactive. Polymerization leads to fouling of quench system, exchangers, dilution steam generator. Fouling reduces plant profitability and on-stream reliability.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • High performance separation system for caustic treating industry

    The key aspects of a caustic treating system pertain to the degree of contact between the caustic and hydrocarbon to facilitate the mass transfer. Increasing the specific surface area of contact in a two phase system necessarily creates a tight emulsion. The product hydrocarbon often contains entrained caustic, which is not easily recovered by a simple water wash followed by a separator drum. The spent caustic is often regenerated with sour-naphtha stream that is used to extract the disulfide oils into the hydrocarbon phase.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • High performance separation system for silicones industry

    Silicones are inert, synthetic compounds with a variety of forms and uses. Typically heat-resistant and rubber-like, they are used in sealants, adhesives, lubricants, medical applications, cookware, and insulation. Silicones are polymers that include silicon together with carbon, hydrogen, oxygen, and sometimes other chemical elements. Some common forms include silicone oil, silicone grease, silicone rubber, and silicone resin.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Premium

    Industrial gas monitoring

    By J.U.M. Engineering GmbH based in Karlsfeld, GERMANY.

  • Premium

    Liquid control for the oil & gas industry

    By Arjay Engineering Ltd. based in Oakville, ONTARIO (CANADA).

  • Premium

    Air dedusting for clinker cooler

    e control of clinker fines emissions after the heat exchanger, placed downstream of the clinker cooler is usually a problem for plant managers. The process is characterized by high material abrasiveness, high loads and variable flow rate in normal and maximum conditions.

    The usual dedusting arrangement is achieved through a bag house which is typically associated with high maintenance costs and downtime in production due to frequent filter element replacements.

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Premium

    Sustainable solutions for oil & gas industry

    Protecting Earth’s environment is becoming increasingly difficult as the development of emerging economies and industrial growth continue to accelerate and draw more demand for energy resources. At the same time increased legislation, consumer preference for greener energy and competition increasingly drive the need for more sustainable extraction, processing, transport and use of conventional energy resources. None more so is this true than for the Oil and Gas producers who must now develop strategies and practices to enhance their sustainability performance, economic position and social standing.

    By thinkstep based in Leinfelden-Echterdingen, GERMANY.

  • Premium

    Air Pollution Control Solution for the FGD - SO2

    Flue Gas Desulfurization (FGD) involves the removal of sulfur dioxide and other acids from flue gases. Typical sources of acid gases include fossil fuel boilers, waste combustors, and other industrial applications such as refining and smelting. The Macrotek wet and dry FGD systems can achieve over 99% acid removal by using a variety of reagents, including caustic, sodium carbonate, lime and limestone, and waste alkaline solids or liquids.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you