Catalytic Reduction (Air Filtration) Equipment Available In Aruba
-
Manufactured by Dürr Systems, Inc.based in USA
SCR Air Pollution Control Systems used for the selective catalytic reduction of nitrogen oxides (NOx) in flue gases and process exhaust gases when high nitrogen oxide conversion rates needed. They can be installed in Oxi.X DF (direct-fired thermal oxidizer) systems for flue gas purification or used as stand-alone units. As their name ...
-
Manufactured by Agriemach Ltdbased in UNITED KINGDOM
Agriemach Ltd offer a bespoke service for the design , manufacture and project management of Selective Catalytic Reduction Technology. Offering a wealth of experience and a global knowledge base, we offer full system design, Dosing System upgrades, Catalyst Replacement and all ancillary equipment required from bulk urea tanks to Heat and ...
-
Manufactured by Hitachi Zosen Inova AGbased in SWITZERLAND
DYNOR is the answer to Europe’s tightened nitrogen oxide limits. Simple in design and easy to install, the non-catalytic DYNOR process closes the gap between the costly SCR process and the conventional SNCR process. It is an investment which pays ...
-
Manufactured by Caterpillarbased in USA
Primary reduces NOx and can be combined with DOC or DPF technology to reduce multiple pollutants in a single package. System consists of SCR catalyst, static mixer, reactor housing and dosing control system. Applicable to natural, gas or diesel ...
-
Manufactured by Cummins Inc. - Cummins Emission Solutionsbased in USA
Selective catalytic reduction (SCR) systems use a chemical reductant, in this case urea, which converts to ammonia in the exhaust stream and reacts with NOx over a catalyst to form harmless nitrogen gas and water. Urea is a benign substance that is generally made from natural gas and widely used in industry and agriculture. In our SCR ...
-
Manufactured by MAL DeNOx Systemsbased in AUSTRIA
The classic technology for the reduction of NOx emissions is applied within the temperature range of 900°C to 1050°C of the flue gas. Dual compound lances are used to inject aqueous ammonia or urea solution within the ideal flue gas temperature window reducing NOx emissions. The reactant volume is adapted to the load ...
-
Manufactured by Epcon Industrial Systems, LPbased in USA
Epcon has designed SCR systems based on cutting edge technologies as an industry leader in research & development with our own original ...
-
Manufactured by CSM Worldwide, Inc.based in USA
Selective catalytic reduction (SCR) is classified as Best Available Control Technology (BACT) for NOx abatement by the U.S. Environmental Protection Agency in many industrial applications. CSM designs, manufactures and installs high-performance SCR systems that have been classified BACT in certain applications in some of the most stringent ...
-
Manufactured by EES - Environmental Energy Servicesbased in USA
STEP Combustion also designs, engineers, and provides Selective Catalytic Reduction (SCR) systems which provide the highest level of NOx reduction. As its name implies, the SCR uses a catalyst and injected reagent such as ammonia or urea to convert NOx to elemental nitrogen (N2. The reagent is injected upstream of catalyst housing and ...
-
Manufactured by Branch Environmental Corporationsbased in USA
Removal of Oxides of Nitrogen – N0x can be achieved by injecting Ammonia into the air and passing the resulting mixture over a catalyst. Selective Catalytic Reduction – SCR involves the use of a catalyst that is selective to promote the reaction of Ammonia and N0x to form Nitrogen and water. Several different forms of Ammonia ...
-
Manufactured by Dinex A/Sbased in DENMARK
The primary function of SCR catalyst in a diesel ATS is to convert harmful nitrogen oxides (NOx = NO + NO2) in the exhaust gas to nitrogen and water. The SCR reaction takes place on the catalyst, in the presence of NH3 generated from AdBlue (Urea and water solution) upfront the SCR catalyst. Advanced emissions regulations like EU VI /EPA/China N6/Bharat 6 need above 95% NOx conversion levels and ...
-
Manufactured by Great Southern Technologiesbased in USA
As the industry continues to move toward reducing emissions to meet regulatory requirements, Great Southern Technologies can supply plants with recommended modifications to existing SCR systems or supply new SCR systems that will provide the best solution to reduce emission ...
-
Manufactured by Johnson Mattheybased in UNITED KINGDOM
The SCRF system integrates Selective Catalytic Reduction (SCR) with a soot filter – the next step for diesel NOx control. The schematic below demonstrates how the SCRF system for light duty diesel improves system compactness and is an example of how, over the European drive cycle, it warms up more quickly than an SCR downstream of a CSF ...
-
Manufactured by AirProtekt Limitedbased in UNITED KINGDOM
AirProtekt supplies either the complete Selective Catalytic Reduction (SCR) package or the SCR catalyst for control of NOx emissions. The catalyst technologies are all well proven and supported by the highest manufacturing and quality control standards from one of the leading catalyst manufacturers in the world. The AirProtekt nitrogen oxide ...
-
Manufactured by BASF Catalystsbased in USA
BASF Catalysts technologies enable customers to meet tightening NOx emission standards around the world. BASF Catalysts has been a leader in SCR technology for stationary source ...
-
Manufactured by CECO Environmentalbased in USA
Through years of experience and knowledge, we have patented innovative technologies designed to reduce nitrogen oxide (NOx) emissions for new or existing coal, oil, and gas fired boilers. Our CCA brand Selective Non-Catalytic Reduction (SNCR) systems provide a low cost technique to reduce NOx emissions by 30%-60% for both boilers and lime ...
-
Manufactured by Logical Clean Air Solutionsbased in USA
An SCR system is a reliable, cost-effective technology designed to control nitrogen oxides (NOx) emissions from medium and heavy-duty diesel engines in on-road, non-road and stationary applications. ...
-
Manufactured by E.I.Tec. GmbH Energy and Environmental Technologybased in GERMANY
In general, there are two procedures available which can be implemented depending on flue gas conditions. Non-selective catalytic reduction processes are based on the injection of a reactive agent without using an activating catalytic ...
-
based in AUSTRIA
CTP’s SCR systems are used in industrial processes with a wide variety of gas volumes and NOx concentrations. These systems are also suitable for increased particulate ...
-
Manufactured by Bekaert Groupbased in BELGIUM
Bekaert heating cord is a special plastic coated metal cable with a specific electrical resistance which is used for heating in applications where flexibility and reinforcement is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you