Climate Modeling (Air Modeling) Equipment Available In Australasia
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
Based on years of the success with UV SENTRY, the Harsh Climate model was developed by Cerex’s engineers to meet the demand of open path analyzers that can output reliable data in the midst of extreme environmental conditions. Utilizing the same proprietary technology, the Harsh Climate model features all the benefits of ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
Measure pressure based Waves with the Aanderaa Wave Sensors- compact fully integrated sensors for measuring wave and tide conditions. The 5218 wave sensor is designed to be mounted on the Aanderaa SeaGuard top-end plate or connected to SmartGuard using AiCaP CANbus or in other measurement systems using the RS-232 interface. The 5218R wave sensor sensor is designed for use with long cables by ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
The most commonly analyzed gas using a greenhouse gas analyzer is carbon dioxide (CO2). Other common gases that can be detected include methane (CH4), nitrous oxide (N2O), and various fluorinated gases. The two primary measurement techniques used for detecting these greenhouse gases are absorption spectroscopy and non-dispersive infrared detection. We mainly use NDIR technology to detect CH4, ...
-
based in AUSTRIA
All the features and operation of the 'Climate' model (sensors and 3 switch kit), with an extra 8 outputs and 8 inputs to control pumps, timers (cycle, periodic or remote controlled) , vents, alarms and more. The PLUS controller can utilize the 'Text Me' modem option. ...
-
Manufactured by Tenney Environmental - a brand by Thermal Product Solutionsbased in USA
Does your environmental testing conditions have special requirements, or are you unsure of the right product for you? Tenney and Lunaire Environmental offer custom environmental test chambers - including custom climate chambers and custom vacuum chambers. The experienced Tenney and Lunaire team can provide customizations to their climatic ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
and install the sensor in less than 5 minutes on any soil in different climates and weather conditions. Model TRI-1/30 is used with magnetic sensor MTC-30 from Phoenix Geophysics Limited, but can be easily redesigned for virtually any induction coil upon ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
and install the sensor in less than 5 minutes on any soil in different climates and weather conditions. Model TRI-1/50 is used with magnetic sensor MTC-50 from Phoenix Geophysics Limited, but can be easily redesigned for virtually any induction coil upon ...
-
Manufactured by Dosch Messapparate GmbHbased in GERMANY
The rugged and haradwearing pressure switches series 188 are used to control pressures in the range 0.1 to 15 ...
-
Manufactured by Beijing Eco-mind Technology Co., Ltdbased in CHINA
on atmospheric CO2 concentrations, which in turn changes regional and global climate. The intensity of soil organic carbon decomposition is regulated by temperature, and its sensitivity to temperature is considered to be one of the key determinants of future climate change trends, and is a key assumption and important parameter in terrestrial ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
The Acoem Aurora NE-400 Polar is a three wavelength integrating nephelometer and the flagship of the Aurora NE series. Measure light scattering in up to 18 user-selectable angular sectors, using varied backscatter shutter positioning to help determine the phase function of aerosols and bring our climate research and modelling projects to ...
-
Manufactured by Brechtelbased in USA
The Brechtel Model 1204 CVI is a virtual impactor inlet ideal for probing the detailed properties of actual CCN inside real clouds. The CVI was developed for aircraft deployment so researchers could explore aerosol-cloud interactions across a broad spectrum of cloud types and under different air mass source region conditions. Extensively ...
-
Manufactured by -4H- JENA Engineering GmbHbased in GERMANY
The -4H- FerryBox is an autonomous, low-maintenance measuring system, which is designed for the continuous operation onboard ships, on measurement platforms and at river banks. The -4H- FerryBox as a fixed installed system provides the ideal basis for extensive and continuous long-term monitoring while maintenance efforts are kept to a minimum. The integrated automatic cleaning system ensures a ...
-
Manufactured by Ball Corporationbased in USA
Small but capable, Ball’s CIRiS instrument will observe the Earth from a spacecraft no larger than a shoebox. The miniaturized instrument weighs only 1.4 kg (3 lb); due to its small size and weight, the cost of launch is substantially reduced, contributing to lower overall mission ...
-
Manufactured by Droplet Measurement Technologies (DMT)based in USA
The BCP is a compact probe that measures 5 µm to 75 µm particles with no contamination from ice crystal shattering and no airflow ...
-
Manufactured by Droplet Measurement Technologies (DMT)based in USA
The PIP is an optical spectrometer that measures the size and shape of particles from 100 µm to 6200 ...
-
Manufactured by Droplet Measurement Technologies (DMT)based in USA
This optical spectrometer measures the size and shape of particles from 25 µm to 1550 µm, liquid water content from 0.01 g/3 to 3 g/3 and airspeed to 200 ...
-
Manufactured by Yankee Environmental Systems (YES)based in USA
The Model XDD-938 Expendable Digital Radiosonde conducts precise upper air observations using Global Positioning system (GPS) wind finding technology. It is the first system capable of both radiosonde and dropsonde sounding modes, providing vertical profiles of 3D pressure, temperature, humidity and winds. It can either be released ...
-
Manufactured by Droplet Measurement Technologies (DMT)based in USA
The PCASP-100X is an airborne optical spectrometer that measures aerosol particles in the 0.1 µm to 3 µm ...
-
by CADS UKbased in UNITED KINGDOM
CADS are proud to be the Official Sales Partner for Dlubal for all their products in the UK, Ireland, India, UAE, Bahrain, Kuwait, Qatar and Saudi ...
-
Manufactured by Droplet Measurement Technologies (DMT)based in USA
The CCP is a multipurpose particle spectrometer that includes three Droplet instruments (CDP, CIP, and LWC) – plus temperature and relative humidity sensors – in a single package. Researchers use the CCP to obtain aerosol particle and cloud hydrometeor size ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you