Air Modeling Software For Air And Climate
-
Showcasebased in CANADA
CALRoads View is an air dispersion modeling package for predicting air quality impacts produced by mobile sources at or near roadways and roadway intersections. Three US EPA models - CALINE4, CAL3QHC, & CAL3QHCR - are combined into one seamless graphical interface. These models predict air pollution concentrations of carbon monoxide (CO), nitrogen dioxide (NO2), particulate matter (PM), and ...
-
Showcasebased in UNITED KINGDOM
FLOWSTAR-Energy is a practical, high resolution model that simulates air flow and turbulence over flat or complex terrain, including the effects of stratification, variable surface roughness and wind turbines in operation. FLOWSTAR-Energy is an extended version of the FLOWSTAR model of flow over complex terrain; FLOWSTAR-Energy provides the flow field and turbulence output familiar to users of ...
-
Premiumbased in CANADA
AQMIS (Ambient Quality Management Information System) is an intelligent environmental compliance solution for regulatory agencies, consultants, and industrial facilities around the world. AQMIS provides seamless integration of all environmental data, modeling systems, analytics, data visualization, and reporting in a single online solution. AQMIS is a cloud solution that includes all the features ...
-
Premiumbased in CANADA
AUSTAL View is a graphical user interface for the official German Federal Environmental Agency air dispersion model, AUSTAL. The AUSTAL model was developed according to Germany's air pollution control regulation TALuft (Technical Instructions on Air Quality). AUSTAL is a Lagrangian particle tracking air dispersion model that contains its own diagnostic wind field model (TALdia). The model takes ...
-
Premiumbased in UNITED KINGDOM
LSMS (Liquid Spill Modelling System) is a tool for calculating the spreading and vaporisation of a liquid pool. Liquids such as liquefied natural gas (LNG), liquefied petroleum gas (LPG) and others are routinely stored at low temperatures and on their release to the atmosphere they boil or evaporate depending on their temperature relative to the ambient air. Such liquids flow across the ground or ...
-
Premiumbased in CANADA
IRAP-h View is a user-friendly graphical interface for conducting a comprehensive multi-pathway human health risk assessment. It simultaneously calculates risk values for multiple chemicals, from multiple sources, at multiple exposure locations. Regardless of experience, risk assessors, trial burn planners, permit writers, and toxicologists can readily produce expert results and professional ...
-
Premiumbased in UNITED KINGDOM
ADMS-Forecast provides very high resolution air quality forecasts on the world-wide web. The forecasting system combines local data on traffic patterns, weather forecasts and regional forecasts of atmospheric composition. These data are input to the ADMS-Urban pollution dispersion modelling system, which gives concentrations at a high degree of spatial resolution across a ...
-
Premiumbased in UNITED KINGDOM
ADMS 6 is an advanced dispersion model used to model the air quality impact of existing and proposed industrial installations. Its many features include allowance for the impacts of buildings, complex terrain, coastlines and variations in surface roughness; dry and wet deposition; NOx chemistry schemes; short term releases (puffs); calculation of fluctuations of concentration on short timescales, ...
-
Premiumbased in UNITED KINGDOM
ADMS-Airport is a comprehensive modelling tool for air quality management of airports. It has many of the features of the ADMS-Urban model and includes allowance for all relevant emission sources at airports and utilises algorithms designed specifically to model dispersion from aircraft ...
-
Premiumbased in CANADA
CALPUFF View provides a complete graphical solution for the CALPUFF modeling system: CALPUFF, CALMET, CALPOST, and their related pre- and post-processors. All three modeling systems are supported by the interface: USEPA Approved Version 5.8, Version 6, Version 7. CALPUFF View includes powerful and independent QA tools, stunning report-ready results, and a wide range of visualization ...
-
Premiumbased in CANADA
AERSCREEN View is a user friendly interface for the US EPA AERSCREEN screening-level air quality model and associated modeling programs. AERSCREEN estimates worst-case impacts of ground level concentrations for a single source by interfacing with the screening mode of the AERMOD model. Scenarios can include simple or complex terrain, building downwash, and NO2 ...
-
Premiumbased in UNITED KINGDOM
The ADMS-Roads pollution model is a comprehensive tool for investigating air pollution problems due to networks of roads that may be in combination with industrial sites, for instance small towns or rural road networks. ADMS-Roads combines many of the scientific capabilities of CERC's air quality management system ADMS-Urban with an easy-to-use interface. Model operation is similar to other ADMS ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
Air Pollution Modelling Software – Oizom Environmental AI provides environmental data prediction and forecasting. The purpose of environmental data prediction is to analyze the past and current environmental trends of a region to forecast its future impact. The data obtained from a few locations can be used to predict the environmental conditions of the surrounding area, using methods like ...
-
Premiumbased in UNITED KINGDOM
EMIT is a comprehensive tool for compiling and editing emissions inventories, which allows simple, fast calculation and analysis of ...
-
Premiumbased in CANADA
AQMIS SaaS centralizes environmental data across your organization automating and streamlining complex tasks to save you time and ...
-
Premiumbased in UNITED KINGDOM
GASTAR is a dense gas dispersion model developed by CERC ideally suited to modelling accident and emergency response scenarios or investigating site safety involving releases of flammable and/or toxic materials from a variety of industrial accidents such as cryogenic spills, catastrophic tank failure, pipe fractures and multi-phase ...
-
Premiumbased in CANADA
EcoRisk View is an advanced ecological risk assessment program for conducting a comprehensive multi-pathway ecological risk assessment by simultaneously calculating risk values for multiple chemicals, from multiple sources, at multiple exposure ...
-
Premiumbased in UNITED KINGDOM
The WRFtoMet utility is a command line application which extracts meteorological data from WRF netCDF files and creates ADMS format .met files. It was originally developed for the ADMS-Urban Regional Model Link (RML) system but can also be used for generating .met files for stand-alone modelling runs. The output .met files produced by this utility can be used in any of the ADMS family of models, ...
-
Premiumbased in CANADA
AERMOD View is a complete and powerful air dispersion modeling package which seamlessly incorporates the U.S. EPA’s preferred regulatory air dispersion model into a powerful, easy-to-use ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS EnviMan is a series of software modules for management of environmental information. The MS Windows based EnviMan software offers a range of functions for flexible and cost-effective solutions for urban ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you