Air Monitoring Equipment available in Botswana

Available in Botswana| Near Botswana
857 Results found

We couldn't find any results in Botswana

Here is a list of results available in Botswana

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Available in: Africa ×

  • Available in: Botswana ×

Signal - Model 447 - Atmospheric NOx Analyser

by Signal Group Ltd     based in Camberley, UNITED KINGDOM

NOx analyser for ambient applications. Available in high sensitivity configuration. Optical permeation device for daily calibration checking.

MCM - Model CODD - Continuously Operating Desiccant Dryers

by Moisture Control & Measurement Ltd     based in Wetherby, UNITED KINGDOM

MCM's range of Continuously Operating Desiccant Dryers (CODD) are intended to provide a constant flow of 'dry' Air or N2, certified by NPL to be drier than -75°C Dewpoint.Incorporating either 2 or 4 columns, dependent on the required flow, these on-line dryers (dehumidifiers) switch between duty and regeneration columns, thus ensuring that the ...

Allergenco-D - Model 10-pack - Disposable IAQ Air Monitoring Cassettes

by Environmental Monitoring Systems, Inc     based in Charleston, SOUTH CAROLINA (USA)

The Allergenco-D (10-pack) disposable IAQ air sampling cassette was developed for the sampling and collection of aeroallergens and bioaerosols for quantitative analysis of mold spores, pollen, skin fragments, insects, combustion particles, toners, enivironmental dusts, construction dusts, and other airborne particulates. The Allergenco-D ...

CMC SmartCEMS-60 - Model SCUS60 - Predictive Emission Monitoring System

by CMC Solutions, LLC     based in Farmington Hills, MICHIGAN (USA)

The SmartCEMS-60 PEMS or predictive emission monitoring system (PEMS) is a complete system that provides continuous data recording and report generation compliant under U.S. EPA 40 CFR Part 60 regulations. The system comes with a data acquisition component and is guaranteed to meet 40 CFR Part 60, Appendix B, PS-16 audit standards on combustion ...

HORIBA - Total System Integration / Multiple Pollutants Monitoring

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

HORIBA designs, assembles, calibrates and tests complete integrated systems for simultaneously measuring multiple pollutants. A system for monitoring five pollutants can typically fit into one 19-inch rack. Rack-mounted systems can be installed in equipment rooms, stand-alone shelters, trailers, vans, large trucks, or aboard vessels. HORIBA can ...

CMC SmartCEMS-75 - Model SCUS75 - Predictive Emission Monitoring System

by CMC Solutions, LLC     based in Farmington Hills, MICHIGAN (USA)

The SmartCEMS-75 PEMS or predictive emission monitoring system (PEMS) is a complete system that provides continuous data recording and report generation compliant under U.S. EPA 40 CFR Part 75 regulations. The system comes with a data acquisition component and is guaranteed to meet 40 CFR Part 75, Subpart E for combustion turbines and gas/oil ...

HI-Q - Model MK-30 - Sample Anaysis Monitoring Chamber

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The MK-30 Sample Analysis Monitoring Chamber is used with a PC computer to provide measurements of swipe (smear) samples, evaporation samples, and air filters. The MK-30 has a shielded chamber to reduce background and increase measurement sensitivity. Various detectors can be used, for specific applications such as beta,gamma, and alpha/beta ...

Environmental Sensors - Model Z-1400 - Nitrogen Dioxide Monitor Meter

by Environmental Sensors Company     based in Boca Raton, FLORIDA (USA)

Environmental Sensors Co.'s Nitrogen Dioxide Meter is a hand held instrument that measures nitrogen dioxide concentration in a range of 0-20 ppm and a resolution of 0.1 ppm. The instrument makes it possible to monitor nitrogen dioxide vapor in air. The insturment has an LCD display giving concentrations in ppm, a low battery indicator, and an ...

Environmental Sensors - Model Z-100XP - Portable Desktop Ethylene Oxide Monitor Meter

by Environmental Sensors Company     based in Boca Raton, FLORIDA (USA)

Environmental Sensors Co.'s Ethylene Oxide Meter is a portable desktop instrument that measures ethylene oxide concentration in a range of 0-20 ppm and a resolution of 0.1 ppm. The instrument makes it possible to monitor ethylene oxide vapor in air. The insturment has an LCD display giving concentrations in ppm every 10 seconds, a low battery ...

Model PRO902C Modular - External Low Flow Dilution Probe

by Thermo Scientific - Air Quality Instruments     based in Franklin, MASSACHUSETTS (USA)

PRO902C Probe handles the toughest environments while offering significant advantages over typical in-stack dilution probes.The dilution extractive technology in combination with the thermo-electric cooler provides accurate and concise readings available in both terms of concentration and mass-emission rates. aturing an O2 fuel cell for oxygen ...

Model PFS-WM - Wedge Type Flow Meter

by Primary Flow Signal, Inc. (PFS)     based in Cranston, RHODE ISLAND (USA)

The PFS-WM WedgeType™ excels where others fail, accurately measuring highly viscous, rough, or solids-bearing fluids and slurries, as well as gas or steam. This meter is even ideal for asphalt, tar-sands, tracking fluids, spent water, sludge, cement, and other harsh industrial uses.

Model SPX50 - Dust Sensor

by Sefram     based in Templemars, FRANCE

The SPX 50 is a sensor, which is based on the tribo-electricity principle. It can be used for dust rejection detection and monitoring.

Cirrus - Environmental & Airport Noise Monitors

by Cirrus Research plc     based in Hunmanby, UNITED KINGDOM

Cirrus Research plc has a range of Permanent and Portable Noise Monitors, Sound Level Meters and Noise Measurements systems that can be used for the measurement and monitoring of environmental noise.

Fresh Produce Storaging

by a-Lab Ltd.     based in Keuruu, FINLAND

The quality of the air conditioning system determines the quality of the produce at the end of the storage period. For this reason it plays a major role in the productivity of the whole operation. Well-designed and built air conditioning reduces weight loss during storage considerably and generates savings in energy consumption.

9025-XPS Compressed Air Monitoring System

by GfG Instrumentation     based in Ann Arbor, MICHIGAN (USA)

One of GfG’s latest products is the 9025-XPS fully portable compressed air monitoring system. The 9025-XP is the unit of choice where specific and accurate measurement of carbon monoxide and oxygen levels are required. Designed to meet OSHA requirements for monitoring of Grade D respirable air, this unit is equipped with reliable ...

OPTICON - Pig Heating System

by OPTICON Agri-systems     based in Venlo, NETHERLANDS

During cold weather conditions or when pigs are too small or young to give off enough heat to keep the pig house warm, supplemental heat will be required to maintain adequate inside conditions.

Aeroqual - Model Series 500 - Portable Indoor Air Quality Monitor

by Aeroqual Ltd     based in Mount Eden, NEW ZEALAND

The Series 500 air quality sensor enables accurate real-time surveying of common outdoor air pollutants, all in an ultra portable handheld monitor. Air quality professionals typically use the Series 500 for short term air quality studies and carrying out checks on pollution “hot spots”. The Series 500 can also be deployed for short ...

EPAM - Model 5000 - Environmental Particulate Air Monitor

by Environmental Devices Corporation (EDC)     based in Plaistow, NEW HAMPSHIRE (USA)

An affordable, easily deployable, and portable air monitor designed for measuring trace level for ambient air pollution. The unique sampling design allows for real-time data and filter gravimetric analysis utilizing the FRM 47mm Cassette located directly behind the optical sensor. EPAM-5000 offers a weather tight carrying case, temperature ...

DeltaCal - Model DC1/DC100 - Calibrator for Federal Reference Method Samplers

by Keika Ventures, LLC (KV)     based in Chapel Hill, NORTH CAROLINA (USA)

BGI's DeltaCal is the first and only continuous volumetric flow calibration/audit device which gives a direct indication of volumetric flow rate, standard flow rate, barometric pressure (both mm/Hg & mb), ambient temperature and filter temperature in one instrument. It was developed for use with U.S. EPA PM2.5 designated samplers and their PM10 ...

Protea - Model TDLAS - Tunable Diode Laser Absorption Spectroscopy

by Protea Limited     based in Middlewich, UNITED KINGDOM

For highly selective gas measurements of one or two gases, Tunable Diode Laser Absorption Spectroscopy (TDLAS) has been introduced by Protea into compact and easy to use industrial gas analyser systems.

Need help finding the right suppliers?

Let the XPRTs do the work for you