air quality control Equipment available in Maldives

Available in Maldives| Near Maldives
78 Results found

We couldn't find any air quality control equipment in Maldives

Here is a list of results available in Maldives

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Keyword: air quality control ×

  • Available in: Asia & Middle East ×

  • Available in: Maldives ×

Model AQT-2000 - Air Quality Monitors/Controllers

by Enercorp Instruments ltd     based in Toronto, ONTARIO (CANADA)

The AQT Air Quality Monitors/Controllers operates by looking at the signal from a full spectrum sensor, automatically zeroing out temperature and humidity effects, and judging the degree of pollution. The sensor is sensitive to a wide variety of air pollutants such as carbon monoxide, ketones, aldehydes, esters benzene, alcohols, hydrogen, ...

Intellair - Programmable Logic Controller for Air Control System

by Inteliair Ltd     based in Bath, UNITED KINGDOM

Intellair is a programmable logic controller (PLC) controlled intelligent air control system that optimises the efficiency of dust extraction, fume extraction and ventilation systems by continually monitoring demand and regulating the extraction or supply of air in accordance with that demand. The system has been designed by air movement ...

Environnement S.A. - Model MGC 101M - Multi-gas Calibrator for Ambient Air Gas Analyzers

by Environnement S.A     based in Poissy, FRANCE

MGC 101 Multi-gas calibrator for ambient air gas analyzer calibration allows: Automatic calculation of dilution and span gas flows, based on commanded concentration, eliminates the need for any manual computation and allows rapid transition from point to pointInternally-stored mass flow controller calibration data improves accuracy (factor of ten) ...

e-Series - Model O342e - UV Photometric Ozone Analyzer

by Environnement S.A     based in Poissy, FRANCE

The O342e ozone monitor combines patented optical technology with decades of expertise to ensure you get best ozone monitoring results available on the market, quickly, ecologically and reliably! It provides accurate, extremely stable and repeatable O3 measurements in the range of 0.2 ppb to 10 ppm The O342e analyzer represents an absolute ...

Environnement S.A. - Model CO12M - Gas Filter Correlation Carbon Monoxide Analyzer

by Environnement S.A     based in Poissy, FRANCE

Infra Red GFC Carbone Monoxide (CO) Analyzer 'EN' Series. TÜV & US EPA approved; Infra red GFC technology for low level monitoring of CO from 0 to 200 ppm. Ultra compact and lightweight – rackable 19'/ 3U. Option: CO2 (max 3000 ppm) / CH4 (max 300 ppm) measurement. NEW: Built-in serial interface (RS 232 / RS 422), USB & TCP/IP ...

Environnement S.A. - Model AS32M - Analyzer for Quick and Direct (Without Conversion) NO2 Monitoring

by Environnement S.A     based in Poissy, FRANCE

Designed to alleviate potential disadvantages of the chemiluminiscence method and to provide the most accurate value for NO2 concentration measurements.

Tekran - Model 1120 - Standard Addition Controller

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1120 Standard Addition Controller allows both standard additions and blanks to be performed at user programmed intervals while using the Model 2537 Mercury Vapor Monitor. Standard additions are accomplished by timed activation of the Model 2537 internal calibration source and zero air selector valves. Standard additions can be ...

Indoor Air Quality Monitors / Indicators / Controllers

by Edinburgh Instruments Ltd     based in Livingston, UNITED KINGDOM

Monitoring and controlling indoor air quality is very important to ensure a healthy and safe living and working environment. IAQ is a comprehensive index, including room temperature, humidity, fresh air and a diverse range of low concentrations of air contaminants. The measurement of indoor air quality has, conventionally, been used for comfort ...

Deluxe - Model CDLSXX - Duct CO2 Sensors Deluxe

by Veris Industries     based in Portland, OREGON (USA)

CDL carbon dioxide sensors maximize energy savings, while ensuring optimal ventilation. The sensors allow ventilation systems to be controlled by the amount of CO2 present in a space. The CDL Series detect fluctuations in CO2 levels and signal ventilation systems to provide an inlet of fresh air optimal for the space at a given time saving energy ...

Model CWLSXX - Carbon Dioxide Sensors

by Veris Industries     based in Portland, OREGON (USA)

CWL carbon dioxide sensors maximize energy savings, while ensuring optimal ventilation. The sensors allow ventilation systems to be controlled by the amount of CO2 present in a space. The CWL Series detect fluctuations in CO2 levels and signal ventilation systems to provide an inlet of fresh air optimal for the space at a given time saving energy ...

ClimaBox - Air Quality Sensor

by The IMC Group     based in Letchworth, UNITED KINGDOM

The ClimaBox air quality sensor has been designed to monitor CO2, temperature and humidity in one instrument. The unit was designed . pecifically to monitor air quality in terms of carbon dioxide in the air which has been directly linked with sick buildings syndrome (SBS). Additionally the performance of heating and air handling systems can ...

Amcommand I - Air Control and Depth Monitoring System

by Dive Commercial International Inc. (DCI)     based in Seattle, WASHINGTON (USA)

Amron has used their extensive experience in building quality life support equipment and put together the finest one diver console available today.

TAPI - Model T700 - Dynamic Dilution Calibrator

by Enviro Technology Services plc     based in Stroud, UNITED KINGDOM

The T700 is a microprocessor based calibrator for precision gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero calibrations using up to 4 gas sources.

TAPI - Model T703 - Photometric O3 Calibrator

by Enviro Technology Services plc     based in Stroud, UNITED KINGDOM

The Model T703 is a microprocessor controlled ozone calibrator for precision gas analysers. It can deliver concentrations from 50 ppb to 5 ppm at flows from 1 LPM to 5 LPM. The Model T703 has two major components; the ozone generating device and the photometer. The ozone generator produces ozone by passing zero air over a UV lamp. Flow rate and ...

DeltaCal - Model DC1/DC100 - Calibrator for Federal Reference Method Samplers

by Keika Ventures, LLC (KV)     based in Chapel Hill, NORTH CAROLINA (USA)

BGI's DeltaCal is the first and only continuous volumetric flow calibration/audit device which gives a direct indication of volumetric flow rate, standard flow rate, barometric pressure (both mm/Hg & mb), ambient temperature and filter temperature in one instrument. It was developed for use with U.S. EPA PM2.5 designated samplers and their PM10 ...

Kitagawa - Model S-23E - Indoor Air Quality Monitor

by Kitagawa America LLC     based in Pompton Lakes, NEW JERSEY (USA)

Smpling pump : Diaphram. Maximum suction pressure : More than 40kPa (At full load). Gas sampling control mode : Time mode : Automatic pump stop by timer presetting (Accumulated volume indication available). Accumulated mode : Automatic pump stop by accumulated volume (Suctioning time indication available). Display : Digital display by LCD. ...

Aeroqual - Model AQM 65 - Air Monitoring Station with Integrated Calibration

by Aeroqual Ltd     based in Mount Eden, NEW ZEALAND

The AQM 65 is a fully integrated air monitoring station offering near reference levels of performance. The size of a suitcase it can be configured to measure up to 20 different gaseous and particulate pollutants and environmental parameters simultaneously. The AQM 65 offers the optimal balance between performance and price – measuring ...

Aeroqual - Model AQM 65 - Ambient Air Monitoring Station

by Aeroqual Ltd     based in Mount Eden, NEW ZEALAND

The AQM 65 is a fully integrated air monitoring station that delivers ‘near reference’ levels of performance. The size of a large suitcase it can measure up to 20 different gaseous and particulate pollutants and environmental parameters simultaneously. The AQM 65 offers the optimal balance between performance and price – ...

Tekran - Model 2505 - Mercury Vapor Primary Calibration Unit

by Enviro Technology Services plc     based in Stroud, UNITED KINGDOM

The Tekran Model 2505 Mercury Vapor Calibration Unit is an ultra-precise and accurate closed-vessel, saturated gaseous mercury source. The 2505 utilizes a thermoelectrically cooled mercury reservoir and dual temperature sensors calibrated against a US National Institute of Standards and Technology (NIST) traceable source producing exceptionally ...

Need help finding the right suppliers?

Let the XPRTs do the work for you