air quality control Equipment available in Seychelles

Available in Seychelles| Near Seychelles
73 Results found

We couldn't find any air quality control equipment in Seychelles

Here is a list of results available in Seychelles

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Keyword: air quality control ×

  • Available in: Africa ×

  • Available in: Seychelles ×


Intellair - Programmable Logic Controller for Air Control System

by Inteliair Ltd     based in Bath, UNITED KINGDOM

Intellair is a programmable logic controller (PLC) controlled intelligent air control system that optimises the efficiency of dust extraction, fume extraction and ventilation systems by continually monitoring demand and regulating the extraction or supply of air in accordance with that demand. The system has been designed by air movement ...

Model AQT-2000 - Air Quality Monitors/Controllers

by Enercorp Instruments ltd     based in Toronto, ONTARIO (CANADA)

The AQT Air Quality Monitors/Controllers operates by looking at the signal from a full spectrum sensor, automatically zeroing out temperature and humidity effects, and judging the degree of pollution. The sensor is sensitive to a wide variety of air pollutants such as carbon monoxide, ketones, aldehydes, esters benzene, alcohols, hydrogen, ...

TAPI - Model T700 - Dynamic Dilution Calibrator

by Enviro Technology Services plc     based in Stroud, UNITED KINGDOM

The T700 is a microprocessor based calibrator for precision gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero calibrations using up to 4 gas sources.

TAPI - Model T703 - Photometric O3 Calibrator

by Enviro Technology Services plc     based in Stroud, UNITED KINGDOM

The Model T703 is a microprocessor controlled ozone calibrator for precision gas analysers. It can deliver concentrations from 50 ppb to 5 ppm at flows from 1 LPM to 5 LPM. The Model T703 has two major components; the ozone generating device and the photometer. The ozone generator produces ozone by passing zero air over a UV lamp. Flow rate and ...

Tekran - Model 2505 - Mercury Vapor Primary Calibration Unit

by Enviro Technology Services plc     based in Stroud, UNITED KINGDOM

The Tekran Model 2505 Mercury Vapor Calibration Unit is an ultra-precise and accurate closed-vessel, saturated gaseous mercury source. The 2505 utilizes a thermoelectrically cooled mercury reservoir and dual temperature sensors calibrated against a US National Institute of Standards and Technology (NIST) traceable source producing exceptionally ...

Environnement S.A. - Model MGC 101 - Multi-gas Calibrator for Ambient Air Gas Analyzers

by Environnement S.A     based in Poissy, FRANCE

Multi-gas calibrator for ambient air gas analyzers; Automatic calculation of dilution and span gas flows, based on commanded concentration, eliminates the need for any manual computation and allows rapid transition from point to point. Internally-stored mass flow controller calibration data improves accuracy (factor of ten) and simplifies field ...

Ecotech - Model Serinus 55 - Hydrogen Sulphide (H2S) Analyzer

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The Serinus 55 Hydrogen Sulphide analyser (H2S) analyser delivers precise and reliable performance at excellent value. It uses proven UV fluorescent radiation technology and an internal thermal catalytic converter to measure H2S in ambient air (LDL

Ecotech - Model Serinus 44 - NO/NO2/NOX/NH3 Multi Gas Analyzer

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The Serinus 44 analyser delivers precise and reliable performance at excellent value. It uses proven chemiluminescence technology and an external thermal catalytic converter to measure NO, NO2, NOxand NH3 in ambient air (LDL 0.4ppb, Range 0-20ppm). The Serinus range of analysers has been designed using our experience and knowledge gained from ...

Ecotech - Model Serinus 10 - Ozone Analyzer

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The Serinus 10 Ozone (O3) analyser delivers precise and reliable performance at excellent value. It uses proven non-dispersive ultraviolet (UV) absorption technology to measure O3 in ambient air (LDL 0.5 ppb, range 0-20 ppm).

Ecotech - Model Serinus 40 - Oxides of Nitrogen Analyser

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The Serinus 40 Oxides of Nitrogen analyser delivers precise and reliable performance at excellent value. It uses proven chemiluminescence technology to measure NO, NO2 and NOx in ambient air (LDL 0.4 ppb, range 0-20 ppm).

Environnement S.A. - Model CO12M - Gas Filter Correlation Carbon Monoxide Analyzer

by Environnement S.A     based in Poissy, FRANCE

Infra Red GFC Carbone Monoxide (CO) Analyzer 'EN' Series. TÜV & US EPA approved; Infra red GFC technology for low level monitoring of CO from 0 to 200 ppm. Ultra compact and lightweight – rackable 19'/ 3U. Option: CO2 (max 3000 ppm) / CH4 (max 300 ppm) measurement. NEW: Built-in serial interface (RS 232 / RS 422), USB & TCP/IP ...

Environnement S.A. - Model AS32M - Analyzer for Quick and Direct (Without Conversion) NO2 Monitoring

by Environnement S.A     based in Poissy, FRANCE

Designed to alleviate potential disadvantages of the chemiluminiscence method and to provide the most accurate value for NO2 concentration measurements.

Ecotech - Model Serinus 30 - Carbon Monoxide Analyser

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The Serinus 30 Carbon Monoxide analyser delivers precise and reliable performance at excellent value. It uses proven NDIR gas filter correlation technology to measure CO in ambient air (LDL 40 ppb, range 0-200ppm).

Ecotech - Model Serinus 57 - Total Reduced Sulphides Analyser

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The Serinus 57 Total Reduced Sulphides analyser delivers precise and reliable performance at excellent value. It uses proven UV fluorescent radiation technology and a thermal converter to measure TRS in ambient air (LDL 0.3ppb, Range 0-10 ppm). TRS is measured by converting TS to SO2 using the external HTO1000 converter and then measuring the ...

Ecotech - Model Serinus 56 - Total Sulphides Analyser

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The Serinus 56 Total Sulphides analyser delivers precise and reliable performance at excellent value. It uses proven UV fluorescent radiation technology and an external thermal converter to measure TS in ambient air. The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality ...

Ecotech - Model Serinus 51 - SO2/H2S Analyser

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The Serinus 51 analyser delivers precise and reliable performance at excellent value. It combines pulsed fluorescence detection with an internal catalytic converter to sequentially measure H2S and SO2 in the range of 0-2/0-20 ppm respectively with a detection limit of 0.3 ppb. The Serinus range of analysers has been designed using our experience ...

Tekran - Model 1120 - Standard Addition Controller

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1120 Standard Addition Controller allows both standard additions and blanks to be performed at user programmed intervals while using the Model 2537 Mercury Vapor Monitor. Standard additions are accomplished by timed activation of the Model 2537 internal calibration source and zero air selector valves. Standard additions can be ...

Indoor Air Quality Monitors / Indicators / Controllers

by Edinburgh Instruments Ltd     based in Livingston, UNITED KINGDOM

Monitoring and controlling indoor air quality is very important to ensure a healthy and safe living and working environment. IAQ is a comprehensive index, including room temperature, humidity, fresh air and a diverse range of low concentrations of air contaminants. The measurement of indoor air quality has, conventionally, been used for comfort ...

Model CWLSXX - Carbon Dioxide Sensors

by Veris Industries     based in Portland, OREGON (USA)

CWL carbon dioxide sensors maximize energy savings, while ensuring optimal ventilation. The sensors allow ventilation systems to be controlled by the amount of CO2 present in a space. The CWL Series detect fluctuations in CO2 levels and signal ventilation systems to provide an inlet of fresh air optimal for the space at a given time saving energy ...

Need help finding the right suppliers?

Let the XPRTs do the work for you