calibration system Equipment available in Antigua & Barbuda

Available in Antigua & Barbuda| Near Antigua & Barbuda
180 Results found

We couldn't find any calibration system equipment in Antigua & Barbuda

Here is a list of results available in Antigua & Barbuda

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Keyword: calibration system ×

  • Available in: Latin America ×

  • Available in: Antigua & Barbuda ×

MCZ - Model MK2 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system serves the mandatory zero and end point verification of gas analyzers, especially those in automated measuring networks. The use of permeation tubes instead of bottled span gases yields a reasonably priced solution for the span gads generation of, for example, SO2 or hydrocarbon components.

MCZ - Model MK5 / MK10 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system MK5/MK10 is equipped with standard modules for the different methods of generating span gas based on the specific application. The generated span gas is provided depressurized for output. The MK5 series can be equipped with max. 5, the MK10 series with max. 10 modules. Used to calibrate gas analyzers in labs, service ...

MCZ - Model CMK5 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system serves the mandatory zero and end point verification of gas analyzers, especially those in automated measuring networks. The zero and end points are verified with a signal from the measuring network computer; the calibration can also be activated with the keyboard at the front of the CMK.

Sonimix - Model 3014 - Permeation Gas Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

All those which cannot or hates transporting gas cylinders will appreciate the Sonimix 3014. Based on mass flow controller, critical orifices (nozzles) and high stability mechanical pressure regulators, the Sonimix 3014 is able to generate gases such as NO2 or SO2 using dilution or permeation technology. No cylinders, Accurate, Flexible and ...

Sonimix - Model 3030 - Gas Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The SONIMIX 3030 is a calibration system, specially developed for simple applications.

Sonimix - Model 2106 PreDivider - Binary Gas Calibration System

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The binary Predivider Sonimix 2106 is based on the principle of gas stream through sonic nozzles and is built according to the ISO 6145/6 normalization. Most accurate device on the market (0.5% rel.) The Sonimix 2106 PreDil is mainly used to increase the dilution range of the Sonimix 2106 or 7000 gas dividers.

Sonimix - Model 2130 - Gas Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The Sonimix 2130 is the ideal device to test the efficiency of a NOx converter. With it’s built in ozone generator and the use of NO cylinder, it’s easy to generate stable value of NO and NO2. This technology is regulary used in Emission and Automotive applications. This device uses the US EPA method to test NOx converter. US EPA Method, Simple ...

Sonimix - Model 6000 C2 - Station Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The Sonimix 6000 C2 is the station calibration system per excellence. The multigas Mass Flow controller calibrator with GPT, ozone and self regenerable zero air generator, Sonimix 6000 C2, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, ...

Sonimix - Model 3012/3022 - Gas Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The multigas calibrator with GPT, ozone and self re‐generable zero air generator, Sonimix 3012/3022, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, CO, NOx and O3.

MCZ - Model MK5 BNT - Modular Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

Modular calibration system primarily designed as transfer standard to synchronize analyzers in different measuring stations. Transport of the span gas cylinders normally used as transfer standard is unnecessary when using a permeation oven.

MCZ - Model CGM - Compact Calibration System for PC-Controlled

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

Compact system for PC-controlled multipoint multi-component span gas generation for up to 25 l of span gas / hour. Up to 8 gases can be mixed into one span gas. An ozone generator can be integrated to generate ozone span gas or for gas phase titration with ozone.

MCZ - Calibration System for Sampling Probes and Sampling Piping

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

Mobile calibration system as transfer standard to determine the correction values for losses along the sampling path. A gas bag is used to add the known span gas concentration at the sampling of the measuring station. The analysis system can be calibrated to compensate for the losses due to sampling.

Norsonic - Model Nor1504A - Calibration System

by Norsonic AS     based in Lierskogen, NORWAY

Acoustical and electrical calibration of sound measuring instruments, measuring microphones and sound calibrators in accordance with the applicable national and international standards.

IC Controls - Model 615-26 - Ultra Pure Water pH Sampling and Calibration System

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

Close spacing between sensor components sharply reduces high impedence and ion effects for stable pH readings. Small internals allow low-flow with fast pH response. Constant atmospheric head establishes steady pH sensor flow even as process pressure varies. Low ionic strength pH buffers minimize junction potential effects on calibration and speed ...

Model RTD - Fixed Point Calibration System

by Thermometrics Corporation     based in Northridge, CALIFORNIA (USA)

Precision RTD calibration with ITS-90, IPTS-68, Calandar Van Dusan or Polynominal Chart. Industrial RTD Calibration with Data and DEviation from IEC-751. Meters, Transmitters & Switch Calibration. Thermistor & Bi-Metallic Calibration.

Fixed Point Calibration System

by Thermometrics Corporation     based in Northridge, CALIFORNIA (USA)

Thermometrics laboratory has an operating range of -100 °C to +1200°C and is designed to support our research, and production operations. Calibrations are performed in accordance with ANSI Z540 and MIL-STD 45662 and are traceable to N.I.S.T. industrial specifications such as AMS, ASTM, DIN, IEC, and JIS are common knowledge among our ...

Model CS 3 - Calibration Systems

by Oerlikon Leybold Vacuum GmbH     based in Cologne, GERMANY

Routine calibrations of vacuum gauges are an important component of quality assurance schemes. The calibration systems CS from Oerlikon Leybold Vacuum put the customer in a position to check and recalibrate on his own the specified and necessary accuracy of his vacuum gauges.

IONICON - Gas Calibration Unit (GCU) - Advanced Dynamic Gas Dilution System

by Ionicon Analytik Ges.m.b.H.     based in Innsbruck, AUSTRIA

For most trace gas analyzers, calibration is the standard practice to ensure accurate quantification of target substances. The IONICON GCU has been developed to produce precisely controlled concentrations at trace levels with the possibility to adjust the gas matrix humidity and CO2 content for calibration at sample gas conditions. GCU has been ...

IONICON - Model LCU - Liquid Calibration Unit

by Ionicon Analytik Ges.m.b.H.     based in Innsbruck, AUSTRIA

The IONICON Liquid Calibration Unit (LCU) evaporates aqueous standards into a gas stream, resulting in a gas flow containing compounds at defined trace concentrations. This gas can be used for precise calibration of trace gas analyzers over an extensive range of compounds and concentrations.

Sonimix - Model 6000 C1 - Multipoint Multigas Calibrator

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

Due to its permeation tubes this instrument is appreciated in the area where the supplying in gas cylinder is difficult or complicated. The Multipoint Multigas Calibrator Sx 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, ...

Need help finding the right suppliers?

Let the XPRTs do the work for you