carbon monoxide monitoring Equipment available in Puerto Rico

Available in Puerto Rico| Near Puerto Rico
21 Results found

We couldn't find any carbon monoxide monitoring equipment in Puerto Rico

Here is a list of results available in Puerto Rico

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Keyword: carbon monoxide monitoring ×

  • Available in: Latin America ×

  • Available in: Puerto Rico ×

Environnement S.A. - Model CO12M - Gas Filter Correlation Carbon Monoxide Analyzer

by Environnement S.A     based in Poissy, FRANCE

Infra Red GFC Carbone Monoxide (CO) Analyzer 'EN' Series. TÜV & US EPA approved; Infra red GFC technology for low level monitoring of CO from 0 to 200 ppm. Ultra compact and lightweight – rackable 19'/ 3U. Option: CO2 (max 3000 ppm) / CH4 (max 300 ppm) measurement. NEW: Built-in serial interface (RS 232 / RS 422), USB & TCP/IP ...

DiveAir - Model 2 - Compressed Air Monitor

by Geotech     based in Leamington Spa, UNITED KINGDOM

The Diveair2 is used to measure composition of compressed air used to fill gas cylinders for underwater operations. It can also measure possible contaminations due to Carbon Monoxide and VOC.

Ecotech - Model Serinus 30 - Carbon Monoxide Analyser

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The Serinus 30 Carbon Monoxide analyser delivers precise and reliable performance at excellent value. It uses proven NDIR gas filter correlation technology to measure CO in ambient air (LDL 40 ppb, range 0-200ppm).

Vulcain - Model 901T - For Continuous Monitoring of Carbon Monoxide

by Honeywell Analytics, Inc.     based in Lincolnshire, ILLINOIS (USA)

The 901T transmits informational points, control parameters, PI (Proportional, Integral) parameters and fault information to the APOGEE Automation System. It also offers control over certain digital and analog parameters.

ENMET - Model MedAir 2200 - Carbon Monoxide (CO) and Dew Point Monitor

by ENMET, LLC     based in Ann Arbor, MICHIGAN (USA)

Air Quality Monitor for Hospital Compressed Air Systems. Standard unit is available for monitoring carbon monoxide and dew point. Optional units are available for monitoring oxygen and carbon dioxide.

RAM 4021 Respiratory Air Monitor

by GfG Instrumentation     based in Ann Arbor, MICHIGAN (USA)

The RAM 4021 AutoCal® series is the unit of choice where specific and accurate measurement of carbon monoxide, oxygen or dew-point levels are required. Designed to meet OSHA requirements for monitoring of Grade D respirable air, this unit is equipped with a reliable electrochemical sensor that accurately indicates the level of carbon monoxide ...

9025-XPS Compressed Air Monitoring System

by GfG Instrumentation     based in Ann Arbor, MICHIGAN (USA)

One of GfG’s latest products is the 9025-XPS fully portable compressed air monitoring system. The 9025-XP is the unit of choice where specific and accurate measurement of carbon monoxide and oxygen levels are required. Designed to meet OSHA requirements for monitoring of Grade D respirable air, this unit is equipped with reliable ...

Model AQT-2000 - Air Quality Monitors/Controllers

by Enercorp Instruments ltd     based in Toronto, ONTARIO (CANADA)

The AQT Air Quality Monitors/Controllers operates by looking at the signal from a full spectrum sensor, automatically zeroing out temperature and humidity effects, and judging the degree of pollution. The sensor is sensitive to a wide variety of air pollutants such as carbon monoxide, ketones, aldehydes, esters benzene, alcohols, hydrogen, ...

Model CO Clear He - CO Monitor

by Analox Sensor Technology     based in Stokesley, UNITED KINGDOM

The CO Clear He is designed to be installed inline on a heliox compressor arrangement to warn the operator if there a potential contamination of carbon monoxide before it reaches the cylinders/user.

Thermo Scientific - Model 48i HL - High Level CO Analyzer

by Thermo Scientific - Air Quality Instruments     based in Franklin, MASSACHUSETTS (USA)

Using gas filter correlation technology, the Model 48i-HL measures the amount of carbon monoxide in the sample.  The Model 48i-HL is based on the principle that carbon monoxide (CO) absorbs infrared radiation at a wavelength of 4.6 microns. Because infrared absorption is a nonlinear measurement technique, it is necessary for the instrument ...

Model GB-2000 - Portable Indoor Air Quality Monitor

by Environmental Devices Corporation (EDC)     based in Plaistow, NEW HAMPSHIRE (USA)

The Haz-Scanner Model GB-2000 portable indoor air quality monitor is designed to measure levels of lung-damaging particulates, carbon dioxide, and carbon monoxide as well as temperature and relative humidity. Standard features include: an inline 25 or 37 millimeter gravimetric filter cassette for concurrent filter sampling for chemical and ...

Procal - Integrated Emissions & Monitoring Systems

by Procal - Parker Hannifin Corp     based in Peterborough, UNITED KINGDOM

To comply with the specification of many CEMS it is necessary to monitor and report, not only the gas emissions, but also properties such as particulates or opacity. In addition to generating reports in formats acceptable to environmental agencies, it is often necessary to monitor Oxygen and Velocity. The Procal solution enables this data to be ...

CCS - Model CCS811B - Ultra-low Power Digital Gas Sensor for Monitoring Indoor Air Quality

by Cambridge CMOS Sensors     based in Cambridge, UNITED KINGDOM

The CCS811 is an ultra-low power digital gas sensor solution which integrates a metal oxide (MOX) gas sensor for monitoring indoor air quality (IAQ) including Carbon Monoxide (CO) and a wide range of Volatile Organic Compounds (VOCs) with a microcontroller unit (MCU), a Analog-to-Digital converter (ADC), and an I2C interface.

Aeroqual - Model AQM 65 - Ambient Air Monitoring Station

by Aeroqual Ltd     based in Mount Eden, NEW ZEALAND

The AQM 65 is a fully integrated air monitoring station that delivers ‘near reference’ levels of performance. The size of a large suitcase it can measure up to 20 different gaseous and particulate pollutants and environmental parameters simultaneously. The AQM 65 offers the optimal balance between performance and price – ...

Aeroqual - Model AQM 65 - Air Monitoring Station with Integrated Calibration

by Aeroqual Ltd     based in Mount Eden, NEW ZEALAND

The AQM 65 is a fully integrated air monitoring station offering near reference levels of performance. The size of a suitcase it can be configured to measure up to 20 different gaseous and particulate pollutants and environmental parameters simultaneously. The AQM 65 offers the optimal balance between performance and price – measuring ...

IAQ Surveyor (Classical Line)

by GrayWolf Sensing Solutions     based in Shelton, CONNECTICUT (USA)

With 90% of our time spent indoors, determining the quality of the air we breathe indoors is essential for good health and productivity. The IAQ Surveyor II and IAQ Surveyor Pro monitor key indoor air quality indicators including carbon dioxide, humidity, temperature and carbon monoxide. Should these measurements fall outside internationally ...

Air Systems - Fixed Panel Mount Systems

by Air Systems International, Inc.     based in Chesapeake, VIRGINIA (USA)

Breathing Air Panels for Permanent Mounting Applications; Permanent mount Grade-D filtration systems are designed to provide breathing air for a specific number of workers. The system filters compressor air to provide respirator users with Grade-D quality air. The first stage element filters bulk water and particulate, the second stage coalescing ...

Enforcer - Calibration Accessory

by Honeywell Analytics     based in Hegnau, SWITZERLAND

The Enforcer provides easy and cost-effective 'bump testing' for the Impact range of multi gas detectors. Regulations require regular testing of gas monitoring equipment to ensure that the instrument will work as and when required. The Enforcer allows you to easily comply with regulations when using an Impact multi-gas monitor without the need for ...

Impact / Impact Pro / Impact IR Multi-Gas Detectors

by Honeywell Analytics     based in Hegnau, SWITZERLAND

Market leading, very flexible portable gas detector, capable of monitoring 4 gases at once. Using high specification flammable, Oxygen and patented Surecell™ toxic sensors, our unique cartridge technology ensures safe, accurate and reliable measurements are always made.

CCS - Model CCS801 - Ultra-low Power Multi-gas Sensor for Indoor Air Quality

by Cambridge CMOS Sensors     based in Cambridge, UNITED KINGDOM

Cambridge CMOS Sensors (CCS) micro-hotplate technology provides a unique silicon platform for the CCS80x range of Metal Oxide (MOX) gas sensors. These devices enable sensor miniaturisation, have ultra-low power consumption and provide fast response times due to the ability to heat the micro-hotplate very quickly.

Need help finding the right suppliers?

Let the XPRTs do the work for you