Compressed Air Monitoring (Air Monitoring) Equipment
-
Manufactured by GfG Instrumentationbased in USA
One of GfG';s latest products is the 9025-XPS fully portable compressed air monitoring system. The 9025-XP is the unit of choice where specific and accurate measurement of carbon monoxide and oxygen levels are required. Designed to meet OSHA requirements for monitoring of Grade D respirable air, this unit is ...
-
Manufactured by Edgetech Instruments, Inc.based in USA
The Edgetech Instruments SENTRY turn-key measurement and alarm system features a smart multi-sense probe that continuously monitors the dew/frost point and pressure of compressed air systems to detect compressor or dryer failures and system pressure ...
-
Manufactured by ENMET, LLCbased in USA
MedAir 2200 is a compact, easy to install and operate compressed airline monitor that can continuously and simultaneously monitor up to four gases in real-time using internally mounted sensors. MedAir 2200 is typically configured to monitor hospital compressed air for carbon monoxide, oxygen and ...
-
Manufactured by ENMET, LLCbased in USA
ProAir 2200 is a compact, easy to install and operate compressed airline monitor that can continuously and simultaneously monitor up to four gases in real-time using internally mounted sensors. ProAir 2200 can be custom configured to monitor a variety of hazardous gases present in compressed air, ...
-
Manufactured by Beko Technologies Corp.based in GERMANY
Continuous monitoring is essential for the functioning of your compressed air system. However, measurements may be necessary at locations where no stationary measuring equipment is (yet) installed. The METPOINT MCA ("Measuring Compressed Air") is a mobile and flexible solution for these ...
-
Manufactured by Beko Technologies Corp.based in GERMANY
Oil contamination can affect compressed air processing systems in many different ways, posing a danger to the safety of workers, the environment and the production equipment. Monitoring systems such as the METPOINT OCV compact continuously control the compressed air accurately and according to applicable ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The importance of compressed air monitoring. Save money, improve efficiency and get a worry-free night’s sleep by measuring and monitoring your compressed air. Compressed air is a notorious expensive utility as it is 8 times more expensive than electricity, ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
DMS-100 dust tester is a self-developed portable extraction dust monitor, which mainly adopts measuring technology oflaser forward scattering. The key parts of the product are all imported. The tester extracts dust in stack(flue) into dust measuring chamber for measurement. It owns features of high sensitivity, long maintenance-free ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The VPFlowScope® DP is the ultimate measurement tool for saturated compressed air flow measurements. The unique design enables you to take measurements in the discharge pipe of a compressor under 100% saturated conditions. You can combine the probe with two display module types or with a connector cap without ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The VPFlowScope M is a 4-in-1 insertion flow meter for compressed air and technical gases. It can be installed under pressure and measures bi-directional flow, pressure, temperature, totalized flow simultaneously. The VPFlowScope M is the next step in gas measurement. You are industry 4.0 ready, with the additional Ethernet ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
With the VPFlowScope® M you are ready for the future. This next-generation flow meter is Industry 4.0/IOT ready. Next to 4 .. 20 mA and RS485 (Modbus RTU), it also has a built-in Ethernet (Modbus/TCP) interface, making it easy to connect directly to any network. It can be installed under pressure and measures (bi-directional) thermal mass flow, pressure, temperature and total flow ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The VPFlowScope® In-line is the ideal flow meter for point of use consumption measurement. It measures mass flow, temperature, pressure and totalized flow simultaneously and in both directions. The VPFlowScope In-line is perfect for smaller diameters where it produces all the data you need to optimize your compressed air ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The Model ST50 is a compact, low cost solution for accurate, repeatable flow rate measurement of air, compressed air or nitrogen. This insertion-style flow meter has no moving parts and is available in probe lengths for installation into pipe diameters from 2.5 inches to 24 inches [63 mm to 610 mm]. It is easily connected into the pipe via a ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The VPFlowScope® In-line is the ideal flow meter for point of use consumption measurement. It measures mass flow, temperature, pressure and totalized flow simultaneously and in both directions. The VPFlowScope In-line is perfect for smaller diameters where it produces all the data you need to optimize your compressed air ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The VPFlowScope® In-line is the ideal flow meter for point of use consumption measurement. It measures mass flow, temperature, pressure and totalized flow simultaneously and in both directions. The VPFlowScope In-line is perfect for smaller diameters where it produces all the data you need to optimize your compressed air ...
-
Manufactured by KWJ Engineering, Inc.based in USA
12 years ago we were asked to develop a CO monitor to verify that the air supplied to painters, sandblasters, and others working in unfavorable conditions is clean and complies with the 10ppm CO limit. This led to development of the Model 5700, on which all of our other compressed air monitors are based, and the ...
-
Manufactured by GfG Instrumentationbased in USA
GfG Instrumentation presents the RAM 744 AutoCal, wall-mounted or fully portable Compressed Air Monitoring System. The RAM 744 offers continuous in-line CO monitoring allowing for rapid response and eliminating the possibility of sample lines becoming blocked or crimped. It has a fixed flow rate so there are no flow meters to ...
-
Manufactured by HYDRO-GAZ-MEDbased in POLAND
Dew point and CO monitor for compressed air – to continuously monitor dew point, temperature and carbon monoxide level in compressed air. To continuously monitor dew point, temperature and carbon monoxide level in compressed air. Built in ...
-
Manufactured by Comate Intelligent Sensor Co., Ltdbased in CHINA
PTF600 Differential pressure flow meters unique for compressed air net-working ...
-
Manufactured by Camfil Air Pollution Control (APC)based in USA
pressure drop. Four analog inputs can be used to monitor the secondary filter along with other devices such as leak detectors, flow meters, and compressed air pressure ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you