continuous emissions monitoring Equipment available in Ghana

Available in Ghana| Near Ghana
68 Results found

We couldn't find any continuous emissions monitoring equipment in Ghana

Here is a list of results available in Ghana

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Keyword: continuous emissions monitoring ×

  • Available in: Africa ×

  • Available in: Ghana ×

Gasmet - Model CEMS II - Continuous Emissions Monitoring System

by Gasmet Technologies Oy     based in Helsinki, FINLAND

Gasmet CEMS is a modular construction that typically comprises of Gasmet CX4000 FTIR gas analyzer, heated sampling unit, industrial PC and a Zirconia oxygen analyzer which are installed in an air-conditioned cabin. All modules are 19' rack mounted in pull-out shelves for easy accessibility & service. Gasmet CX4000 FTIR gas analyzer allows the ...

Land - Model CEMs - Continuous Emissions Monitoring System Backup

by AMETEK Land     based in Dronfield, UNITED KINGDOM

What happens to your emissions data when a CEMs undergoes routine maintenance or an unexpected breakdown occurs?. Simple, it continues to be captured with the LAND CEMs Back-up system. This system keeps data downtime to a minimum - and ensures that any possible restrictions on data availability as part of an operating permit are met. The CEMs ...

IntelliCEMS - Model IC Series - Continuous Emissions Monitoring Systems

by Cemtrex Inc. - Monitoring Instrument & Products Division     based in Farmingdale, NEW YORK (USA)

The IntelliCEMS Gas Analyzer Systems by Cemtrex offer the latest in technology in order to allow your facility to meet or exceed EPA requirements on emissions monitoring.

MONSOL - Model Extraction Series - Continuous Emissions Monitoring Systems

by Monitoring Solutions     based in Indianapolis, INDIANA (USA)

Extraction CEMS are the most commonly used CEMS today. They are accurate and reliable to very low pollutant levels (single digit ppm). Today's Extraction CEMS are built to run 24/7, 365 days a year. Given the right stack conditions, they are easy to operate and maintain.

MONSOL - Model Dilution Series - Continuous Emissions Monitoring Systems

by Monitoring Solutions     based in Indianapolis, INDIANA (USA)

A Dilution CEMS offers the lowest maintenance of any CEMS by it's elimination of sample conditioners and pumps. Compressed air is used to 'power' the Dilution CEMS. It is sent up the stack where it is mixed with the stack gas at a 100:1 ratio (typ.). The sample is then pushed down to the analyzers. Besides the stack gas being diluted, the moisture ...

Lowe Engineering - Continuous Emissions Monitoring ( CEM ) Systems

by Lowe Engineering Limited     based in Leeds, UNITED KINGDOM

Are you planning to install Emissions Monitoring or do you have a requirement for Gas Analysis? Lowe Engineering's great experience in systems for these two fields could save you money and give you peace of mind.

Ecotech - Continuous Emissions Monitoring Systems

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

We offer a complete solution for continuous emission monitoring, utilising the extractive dilution monitoring method. With over 30 years of experience in the design, construction, installation, commissioning and maintenance of Continuous Emission Monitoring Systems (CEMS), you can rely on us for your CEMS needs.

Continuous Emission Monitoring Systems

by Advanced Control Systems, Inc.     based in Bellingham, WASHINGTON (USA)

ACS designs and builds custom continuous emission monitoring systems to fit your needs. These systems are configured to comply with 40CFR Part 60 and Part 75. Systems can include monitoring for 02, C02, NOx, CO, S02, Total Hydrocarbons, Air Toxics, Flow, and Opacity. We can also provide you with custom data acquisition and control packages or ...

Model BKS-3000 - Continuous Emission Monitoring Systems

by Beijing Care Corporation Ltd.     based in Beijing, CHINA

BKS-3000 Continuous Emission Monitoring Systems (CEMS) is a packaged system in which a sample of gas is continuously drawn from the process point, which is applied for monitoring various industrial sources of air pollutants. Gas concentrations such as SO2, NOx, O2 are on-line continuously detected, the temperature, pressure and flow rate of the ...

Continuous Emission Monitoring System

by HANGZHOU ZETIAN TECHNOLOGY CO., LTD     based in Hangzhou, CHINA

CEMS has four basic parts: the dust monitoring subsystem, gaseous pollutants monitoring subsystem, flue gas parameter monitoring subsystem, system control and data acquisition and processing subsystem. It can monitor SO2, NOx, O2, dust, temperature, pressure, flow rate and other parameters such as HCl, HF, CO, CO2 for a particular occasion. After ...

Model PM 1.0, PM 2.5 & PM 10 - Continuous Emissions Monitoring System

by PM Aware- GlobeOwl Inc     based in Montreal, QUEBEC (CANADA)

Emissions Monitoring: PM 1.0 PM 2.5, PM 10 or Gas Monitoring: H2S, NH3, VOC, CO, Ethylene, Mercaptan, Select any Gas to monitor. One per system included. More available on request. Hardware is fully guaranteed and replaced every 3 years at no charge. Multiple Monitoring Units May Operate Simultaneously

MKS - Model MGS300 - Continuous Emissions Monitoring System

by MKS Instruments, Inc.     based in Andover, MASSACHUSETTS (USA)

The MGS300 System is a fully integrated and certified continuous emissions monitoring system (CEMS) based on high resolution FTIR technology. It is designed to monitor emissions from stationary sources such as waste incinerators, power plants and cement kilns and is able to directly measure the composition of hot, wet and corrosive sample streams ...

Model 7500 - Continuous Emission Monitoring System

by IMR Ingenieurgesellschaft für Mess- und Regeltechnik mbH     based in Neckarsulm, GERMANY

The IMR 7500 is a stationary, extractive flue/stack gas measurement system (CEMS). The IMR 7500 is type approved according to EN 14181 and meets the requirements of TA Luft, 13, 17 and 27

CEMS - Continuous Emissions Monitoring System

by PACE Environmental Products, Inc.     based in Whitehall, PENNSYLVANIA (USA)

As a manufacturer, integrator, and tester PACE Environmental Products Inc. is your single best resource for turnkey CEMS Systems. Each CEMS is designed to conform to current EPA standards and is built to suit the monitoring requirements you need. Housed within a single cabinet, all systems are built with the highest quality and designed for easy ...

CiSCO - Continuous Emissions Monitoring Systems

by Custom Instrumentation Services Corporation - CiSCO     based in Englewood, COLORADO (USA)

Long ago, CiSCO established both Environmental and a Software Departments to ensure that our client’s permit and reporting requirements are met. Since it’s inception in 1985 CiSCO has built over seven hundred and fifty CEMS systems. We have provided outstanding service and guaranteed certification with a certification success rate of ...

VIG Industries - Model System 11 - Continuous Emissions Monitoring ( CEM ) Systems

by VIG Industries     based in Anaheim, CALIFORNIA (USA)

The PSC3 is a CEM system for PCS recycling facility design to monitor total hydrocarbons in the process between carbon vessels and at the stack. The system configuration is based on the VIG Industries dual channel total hydrocarbon analyzer Model-20/2, a programmable sequencer, calibration mode select, a paperless data recorder, and control ...

VIG Industries - Model System 5 - Continuous Emissions Monitoring ( CEM ) Systems

by VIG Industries     based in Anaheim, CALIFORNIA (USA)

This system incorporates two VIG dual channel hydrocarbon analyzers along with a flow control panel and all data logging equipment. The system was mounted in a rugged Anvil case with swivel castors for ease of movement between multiple locations.

VIG Industries - Model System 4 - Continuous Emissions Monitoring ( CEM ) Systems

by VIG Industries     based in Anaheim, CALIFORNIA (USA)

This system incorporates two VIG hydrocarbon analyzers, a multi-point sequencer and a combustion / zero air generator. All sample line temperatures a controlled by the custom sequencer along with the automatic sequencing functions. The zero air generator provides bottle free zero air and clean combustion air.

VIG Industries - Model System 3 - Continuous Emissions Monitoring ( CEM ) Systems

by VIG Industries     based in Anaheim, CALIFORNIA (USA)

This system was designed to measure the volume of oil present on small radiator cores for a major automobile parts manufacturer. The part is heated in the environmental chamber on the left so that the oil on the part is burned and turned into gas. The analyzer measures the gas and sends the signal to the computer system for analysis. The computer ...

VIG Industries - Model System 1 - Continuous Emissions Monitoring ( CEM ) Systems

by VIG Industries     based in Anaheim, CALIFORNIA (USA)

This system incorporates a Model 20 Total Hydrocarbon Analyzer, a custom made control panel, chart recorder and all interconnecting wiring. The system was installed in a cabinet with a clear front door and casters so that it could be easily moved from location to location.

Need help finding the right suppliers?

Let the XPRTs do the work for you