continuous emissions monitoring Equipment in Canada

23 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Keyword: continuous emissions monitoring ×

  • In: Canada ×


Gasmet - Model CEMS II - Continuous Emissions Monitoring System

by Gasmet Technologies Oy     Distributor in ONTARIO (CANADA)

Gasmet CEMS is a modular construction that typically comprises of Gasmet CX4000 FTIR gas analyzer, heated sampling unit, industrial PC and a Zirconia oxygen analyzer which are installed in an air-conditioned cabin. All modules are 19' rack mounted in pull-out shelves for easy accessibility & service. Gasmet CX4000 FTIR gas analyzer allows the ...

Novatech - Model CEMS - Continuous Emissions Monitoring Systems

by Novatech Inc.     based in St Laurent, QUEBEC (CANADA)

Continuous emission monitoring systems are used as a means to ensure that stack emissions are in compliance with applicable air emission standards and regulations.

Model PM 1.0, PM 2.5 & PM 10 - Continuous Emissions Monitoring System

by PM Aware- GlobeOwl Inc     based in Montreal, QUEBEC (CANADA)

Emissions Monitoring: PM 1.0 PM 2.5, PM 10 or Gas Monitoring: H2S, NH3, VOC, CO, Ethylene, Mercaptan, Select any Gas to monitor. One per system included. More available on request. Hardware is fully guaranteed and replaced every 3 years at no charge. Multiple Monitoring Units May Operate Simultaneously

VIG Industries - Model System 11 - Continuous Emissions Monitoring ( CEM ) Systems

by VIG Industries     Distributor in NOVA SCOTIA (CANADA)

The PSC3 is a CEM system for PCS recycling facility design to monitor total hydrocarbons in the process between carbon vessels and at the stack. The system configuration is based on the VIG Industries dual channel total hydrocarbon analyzer Model-20/2, a programmable sequencer, calibration mode select, a paperless data recorder, and control ...

VIG Industries - Model System 5 - Continuous Emissions Monitoring ( CEM ) Systems

by VIG Industries     Distributor in NOVA SCOTIA (CANADA)

This system incorporates two VIG dual channel hydrocarbon analyzers along with a flow control panel and all data logging equipment. The system was mounted in a rugged Anvil case with swivel castors for ease of movement between multiple locations.

VIG Industries - Model System 4 - Continuous Emissions Monitoring ( CEM ) Systems

by VIG Industries     Distributor in NOVA SCOTIA (CANADA)

This system incorporates two VIG hydrocarbon analyzers, a multi-point sequencer and a combustion / zero air generator. All sample line temperatures a controlled by the custom sequencer along with the automatic sequencing functions. The zero air generator provides bottle free zero air and clean combustion air.

VIG Industries - Model System 3 - Continuous Emissions Monitoring ( CEM ) Systems

by VIG Industries     Distributor in NOVA SCOTIA (CANADA)

This system was designed to measure the volume of oil present on small radiator cores for a major automobile parts manufacturer. The part is heated in the environmental chamber on the left so that the oil on the part is burned and turned into gas. The analyzer measures the gas and sends the signal to the computer system for analysis. The computer ...

VIG Industries - Model System 6 - Continuous Emissions Monitoring ( CEM ) Systems

by VIG Industries     Distributor in NOVA SCOTIA (CANADA)

VIG Industries has been working with a major paint booth manufacturer to design systems to measure their abatement efficiency. These systems work on a new patented technology not using standard carbon, which can be regenerated by using warm air rather than steam.

VIG Industries - Model System 2 - Continuous Emissions Monitoring ( CEM ) Systems

by VIG Industries     Distributor in NOVA SCOTIA (CANADA)

This CEM system includes a Model 200/1 Methane / Non methane FID Hydrocarbon Analyzer, a Model 300/2 CO / CO2 NDIR Analyzer, custom built 14 point sequencer, combustion & zero air generator, hydrogen generator, external sample pump, approximately 5000 feet of Teflon sample tubing, monitoring point vaults mounted in the concrete, monitoring ...

VIG Industries - Model System 1 - Continuous Emissions Monitoring ( CEM ) Systems

by VIG Industries     Distributor in NOVA SCOTIA (CANADA)

This system incorporates a Model 20 Total Hydrocarbon Analyzer, a custom made control panel, chart recorder and all interconnecting wiring. The system was installed in a cabinet with a clear front door and casters so that it could be easily moved from location to location.

VIG Industries - Model System 8 - Continuous Emissions Monitoring ( CEM ) Systems

by VIG Industries     Distributor in NOVA SCOTIA (CANADA)

This system was designed to control a VOC destruction system. It includes a VIG Model 20 Hydrocarbon Analyzer to measure breakthrough of VOCs.

VIG Industries - Model System 7 - Continuous Emissions Monitoring ( CEM ) Systems

by VIG Industries     Distributor in NOVA SCOTIA (CANADA)

These systems were installed in a power plant. They were designed to replace two existing, outdated systems. Each package included a sample conditioner, flow control panel, NOX analyzer, O2 analyzer, integrated touch screen and PLC to operate all controls, and a communication and reporting software system. All wiring is located under a removable ...


CMC SmartCEMS-75 - Model SCUS75 - Predictive Emission Monitoring System

by CMC Solutions, LLC     Distributor in ONTARIO (CANADA)

The SmartCEMS-75 PEMS or predictive emission monitoring system (PEMS) is a complete system that provides continuous data recording and report generation compliant under U.S. EPA 40 CFR Part 75 regulations. The system comes with a data acquisition component and is guaranteed to meet 40 CFR Part 75, Subpart E for combustion turbines and gas/oil ...

CMC SmartCEMS - Model SCAEMS - Alternative Emissions Monitoring Systems

by CMC Solutions, LLC     Distributor in ONTARIO (CANADA)

The SmartCEMS Alternative Emissions Monitoring System is a complete system that provides continuous data recording and report generation compliant under U.S. EPA Alternative Emissions Monitoring Systems (CAEMS) regulations. The system comes with a data acquisition component and is guaranteed to meet CAM and U.S. EPA standards for combustion ...

CMC SmartCEMS-EU - Model SCEU - Predictive Emission Monitoring System

by CMC Solutions, LLC     Distributor in ONTARIO (CANADA)

The SmartCEMS-EU PEMS or predictive emission monitoring system (PEMS) is a complete system that provides continuous data recording and report generation compliant under U.S. EPA 40 CFR Part 75 regulations. The system comes with a data acquisition component and is guaranteed to meet EU standards for combustion turbines and gas/oil fired boilers, or ...

CMC SmartCEMS-60 - Model SCUS60 - Predictive Emission Monitoring System

by CMC Solutions, LLC     Distributor in ONTARIO (CANADA)

The SmartCEMS-60 PEMS or predictive emission monitoring system (PEMS) is a complete system that provides continuous data recording and report generation compliant under U.S. EPA 40 CFR Part 60 regulations. The system comes with a data acquisition component and is guaranteed to meet 40 CFR Part 60, Appendix B, PS-16 audit standards on combustion ...

Teledyne - Model ML660 - Conventional Extractive System

by Teledyne Monitor Labs, Inc.     Distributor in QUEBEC (CANADA)

The Teledyne ML660 conventional extractive system is designed to extract and condition hot, wet stack gas for a dry basis measurement of any combination of SO2, nox, CO, CO2, and O2. This system can be configured specifically for 40CFR60, 40CFR75, and process control applications. The Teledyne ML 660 provides a cost effective solution while still ...

CMC SmartCEMS - Model Probe - Predictive Emission Monitoring System (PEMS)

by CMC Solutions, LLC     Distributor in ONTARIO (CANADA)

The SmartCEMS Probe is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Probe will meet the requirements for sampling during model development and PEMS QA activity. The Probe is ...

Teledyne - Model ML675 - Dilution-Extractive System

by Teledyne Monitor Labs, Inc.     Distributor in QUEBEC (CANADA)

The Teledyne ML675 dilution-extractive system can be used in 40CFR75, 40CFR60, and process control applications. In this system, sample is prepared for analysis by diluting stack gas with clean, dry instrument air at the probe location. Since no moisture is removed with dilution, measurements for SO2, NOx, CO, THC and CO2 are made on a wet basis.

Need help finding the right suppliers?

Let the XPRTs do the work for you