Dust Monitoring System (Air Monitoring) Equipment Available In Libya
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DMS-100 dust tester is a self-developed portable extraction dust monitor, which mainly adopts measuring technology oflaser forward scattering. The key parts of the product are all imported. The tester extracts dust in stack(flue) into dust measuring chamber for measurement. It owns features of high sensitivity, ...
-
PremiumManufactured by ENVEAbased in FRANCE
The Leak Locate 660 PLUS is a dust emission monitoring system incorporating a digital network and advanced graphics capability. It is designed for use in any processes where filter type arrestment plant are used, eg bag, ceramic and cartridge filters. The system comprises up to 32 networked sensors, a central control unit, user ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
The SCI-2021 Portable Dust Monitor utilizes state of the art light-scattering principle (near FEM) to measure the mass concentration of particulate matter (PM2.5, PM10, and PM1). When the sampling airflow passes through a uniformly illuminated light sensitive area, the dust particles in the airflow will produce scattered light. Then the ...
-
Manufactured by Focused Photonics Inc. (FPI)based in CHINA
CDMS-1000 is designed with light scattering technology for continuous real-time measurement of particulate concentration along with noise and meteorological parameters. This combination consists of a particle analyzer, camera, sound level meter, and GPRS ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
Sintrol DUMO monitors Total Suspended Particles (TSP) in ambient air based on the signal generated from moving particles. Test measurements in the laboratory and in the field proved that Sintrol DUMO is capable of monitoring low dust concentrations and particle sizes as small as 0.3 micrometers and a monitoring range of 0.1 mg/m3 ...
-
Manufactured by Euro-Gas Management Services Ltdbased in UNITED KINGDOM
Industrial air quality sensing device for accurate measurements of particle and dust ...
-
Manufactured by Sigrist-Photometer AGbased in SWITZERLAND
The StackGuard continuously monitors the scatted light intensity of an extracted, withdrawn sample of gas. The laser light source minimized stray light and improves sensitivity to the µg/m³ level, the filtered purge air prevents from window soiling. A calibration check is performed by means of a checking rod. The sample air is led ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The ET 301 is a dust monitor using well-proven technology providing accurate and rapid results. Being adaptable it can be used on duct sizes from 250mm to 5m making the ET 301 a suitable sensor for a wide range of applications where a dust measurement is required. ET 301 continuous dust monitor uses the ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DMS-200 dust monitor is a self-developed probe-in monitor, based on years of research on dust detection technology. Different from traditional back scattering dust monitor (such as DMS-100/MS-1000), DMS-200 installs a dust measurement module at the top of the probe, which ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The Dustroid Smart is an air particulate monitoring device specially developed to monitor ambient dust particles. The Dustroid Smart is a compact and connected optical particle counter which offers near real-time particulate matter count. The easy to install and the requirement for minimal space for deployment make it a scalable solution to ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
Dustroid is a Continuous Air Particulate Monitoring system to measure the concentration of dust particulates in the ambient air. The dust monitor range is capable of monitoring various sizes of particulates ranging from 1 micron to 100 microns such as Ultrafine Suspended Particulate Matter PM1 ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
-100/MS-1000 dust particle measuring device can be not only matched with CEMS continuous emission monitoring system but also be used separately or together with multiple dust monitors to form a dust monitoring network, sharing the same data collection and processing ...
-
Manufactured by Sintrol Oybased in FINLAND
Continuous dust monitor for trend monitoring in ambient air environments. With increasing demands for workplace health the ability to measure changes in ambient air dust concentration becomes more important by the day. All areas where dust might cause harm to employees or sensitive devices can now be ...
-
Manufactured by Fives Pillardbased in FRANCE
960-007 purge air unit is designed to work with MIP LM 3086 EPA3 / SE / SER dust monitors. Two purge air units are required, one for transmitter and one for receiver unit. Standard model is with 19 mm air hose. The 38 mm version is designed for installations, where the purge air unit may not be installed in close proximity to the ...
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
The fine dust sensor FDS 15 is an optical sensor for continuous measurement and control of fine dust contents. An integrated dust precipitator can be used optionally for the analysis of respirable particle fractions (PM2,5). The determination of the dust content in the FDS 15 is based on the method of scattered light ...
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
Filter monitor for in-situ dust measurement. compact device. suitable for the construction of filter monitoring systems. The PFM 13 C is a highly sensitive system for continuous, tribo-electric in-situ filter monitoring. Thereby a qualitative monitoring of the exhaust gas is ...
-
Manufactured by CEM Specialties Inc.based in CANADA
The measuring of dust emissions can be carried out discontinuously or continuously depending on the requirements. Periodic measurements are applicable only to a limited sampling for the determination of emissions behaviour on site. However, it has to allow conclusions about the continuous behaviour of the system and take into account ...
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
Filter monitor for in-situ dust measurement. compact device with display. suitable for the construction of filter monitoring systems. The PFM 13 is a highly sensitive system for continuous, tribo-electric in-situ filter monitoring. Thereby a qualitative monitoring of the exhaust ...
-
Manufactured by Helmut Hund GmbHbased in GERMANY
The TM-F is a proven and reliable monitor for respirable concentrations with easy connectivity to its industrial ...
-
Manufactured by Instrumexbased in INDIA
The MicroDustec 500X is the latest addition in the list of Environmental Monitoring Innovations by Instrumex. This is the most comprehensive dust monitoring solution that can measure dust particles as low as 0.3μ upto 10μ. Housed in an IP67 protected case, this unit is capable for outdoor continuous ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you