Engine Emissions (Air Monitoring) Equipment
-
PremiumManufactured by ENVEAbased in FRANCE
Heated Turnkey Gas Analysis System ideally suited for fast, continuous and simultaneous measurements of NH3 and NOx in DeNOx applications (SCR and SNCR). In DeNOx systems using urea injection with ammonia (NH3) as a reducing agent, the flow rate and control of NH3 must be continuously adjusted and controlled to prevent excess NH3 emissions ...
-
Manufactured by A & D Technology, Inc.based in USA
The HELIOS platform is equipped with the functions required by any HILS system. The all-in-one design with integrated I/O boards and Interface boards makes the system compact and effective for quick building of HIL system. It is also a platform that enables high-speed inter-node communication and low-latency model synchronization to enable multi-node systems with multiple enclosures required for ...
-
Manufactured by A & D Technology, Inc.based in USA
The only FTIR system optimized for use on-board, and includes integration of data from the ECU, weather data, GPS data and time-aligned video. ...
-
Manufactured by A & D Technology, Inc.based in USA
Multi-component gas analyzer based on Fourier Transform Infrared (FTIR) technology, allows for the continuous raw or dilute measurements of up to 40 gases using one device. A&D offers a variety of in-cell and in-vehicle Gas Analyzers for emissions testing including testers that detect H2, NH3, and our BEX-1000FT multi-component gas ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Gravimetric Impactor (DGI) is a high sample flow rate cascade impactor for low concentration particle measurement applications. The DGI measures gravimetric particle mass size distribution of particles < 2.5 μm in five size fractions. Typical measurement applications of the DGI impactor include engine emission measurements, ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The DLPI+ (Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eFilter is a unique instrument that combines a standard gravimetric filter holder and sensitive real-time PM detection in one compact instrument. The Dekati eFilter assembly includes a standard gravimetric filter holder that is used to determine gravimetric mass of particles in the ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The HT-DLPI+ (High Temperature Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The new Dekati MPEC+ (Mobile Particle Emission Counter) is a compact and portable instrument for easy onboard PN-PEMS measurements. At the core of the MPEC+ is the patented Dekati ePNC particle counting technology, which has been further optimized for fast transient emission measurements. The MPEC+ is the device of choice for highly accurate ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Resolution ELPI+ (Electrical Low Pressure Impactor, HR-ELPI+) is an improved version of the widely used ELPI+ instrument. The High Resolution ELPI+ utilizes a data inversion algorithm that gives real-time particle size distribution in up to 500 size classes 6 nm – 10 μm. Other High Resolution ELPI+ features include wide particle sample concentration range, robust ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The VE 112WP is the wall or panel mount version of our time proven VE112 heated sample filter and interface. Can be mounted in a separate NEMA 4 type housing or the system with all analyzers and sample cooler. With our unique sample back purge system, typically no sample filter at the stack probe is needed. During back purge not only the internal sample filter is cleaned, but also the heated ...
-
Manufactured by Signal Group Ltdbased in UNITED KINGDOM
Series IV Quasar is a Chemiluminescent Detector (CLD) for NOx measurement in engine emissions, combustion studies, process plant, CEMs and medical gas production. A very high specification is achieved using a "soft discharge" neon lamp ozone generator with ambient air, compared with other products on the market that require a continuous ...
-
Manufactured by Selwood Limitedbased in UNITED KINGDOM
Our H range of pumps offer maximum performance and efficiency for high head, high pressure dewatering. These efficient models offer total heads up to 158m, mechanical shaft sealing, Selprime® automatic selfpriming, cast iron construction and emission compliant ...
-
Manufactured by V&F Analyse- und Messtechnik GmbHbased in AUSTRIA
Today’s challenges in developing high performance, low consumption and ultra-low emission engine and catalyst designs demand very fast, sensitive and detailed emission monitoring systems. The V&F MotoSense serves as a powerful tool to study organic H, inorganic N or S gaseous emissions in raw exhaust gas and tail pipe ...
-
Manufactured by Hubei Cubic-Ruiyi Instrument Co., Ltd.based in CHINA
Gasboard-3000E is an analyzer for control of vehicle exhaust emission gases from gasoline, petrol, alcohol or LPG engines. Vehicle exhaust emission gase analyzer is developed based on Micro-flow NDIR technology for the measuring CO, CO2, O2 and NO vehicle exhaust emission ...
-
Manufactured by WerkMasterbased in CANADA
that automatically shuts off the propane engine before emissions reach dangerous ...
-
Manufactured by Viha Steel and Forgingbased in INDIA
12 point screws are used in applications where the screws have to be driven hard and tight. The grip on the head is maximized through the shape. Viha Steel & Forging is a leading manufacturer and supplier of the different 12 point screws stainless steel in different grades. The head of the screw has twelve points as an overlap of two hexagons. The screws also have a flanged underside. The ...
-
Manufactured by Hotstart Incbased in USA
HOTSTART’s CSE (UL C/US listed; Class 1, Div. 2, Group D, T3 or Class 1, Zone 2, Group IIA T3 depending on configuration) is a compact coolant heating system for use in North American hazardous locations and is designed to maintain optimal engine starting temperatures for gas compression or offshore equipment applications. To ...
-
Manufactured by Hotstart Incbased in USA
HOTSTART’s CSA is an IECEx/ATEX-certified compact coolant heating system for use in hazardous locations and is designed to maintain optimal engine starting temperatures for gas compression or offshore equipment applications. To improve equipment startability and availability, the CSA maintains a consistent and uniform ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
When methane is used as a fuel in a gas engine it is burnt and converted to carbon dioxide and other trace elements. This carbon dioxide is released as a hot gas in the CHP plant ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you