gas calibrator Equipment available in Solomon Islands

Available in Solomon Islands| Near Solomon Islands
124 Results found

We couldn't find any gas calibrator equipment in Solomon Islands

Here is a list of results available in Solomon Islands

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Keyword: gas calibrator ×

  • Available in: Australasia ×

  • Available in: Solomon Islands ×

Sonimix - Model 3014 - Permeation Gas Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

All those which cannot or hates transporting gas cylinders will appreciate the Sonimix 3014. Based on mass flow controller, critical orifices (nozzles) and high stability mechanical pressure regulators, the Sonimix 3014 is able to generate gases such as NO2 or SO2 using dilution or permeation technology. No cylinders, Accurate, Flexible and ...

Sonimix - Model 3030 - Gas Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The SONIMIX 3030 is a calibration system, specially developed for simple applications.

Sonimix - Model 2106 PreDivider - Binary Gas Calibration System

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The binary Predivider Sonimix 2106 is based on the principle of gas stream through sonic nozzles and is built according to the ISO 6145/6 normalization. Most accurate device on the market (0.5% rel.) The Sonimix 2106 PreDil is mainly used to increase the dilution range of the Sonimix 2106 or 7000 gas dividers.

Sonimix - Model 2130 - Gas Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The Sonimix 2130 is the ideal device to test the efficiency of a NOx converter. With it’s built in ozone generator and the use of NO cylinder, it’s easy to generate stable value of NO and NO2. This technology is regulary used in Emission and Automotive applications. This device uses the US EPA method to test NOx converter. US EPA Method, Simple ...

Sonimix - Model 3012/3022 - Gas Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The multigas calibrator with GPT, ozone and self re‐generable zero air generator, Sonimix 3012/3022, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, CO, NOx and O3.

IONICON - Gas Calibration Unit (GCU) - Advanced Dynamic Gas Dilution System

by Ionicon Analytik Ges.m.b.H.     based in Innsbruck, AUSTRIA

For most trace gas analyzers, calibration is the standard practice to ensure accurate quantification of target substances. The IONICON GCU has been developed to produce precisely controlled concentrations at trace levels with the possibility to adjust the gas matrix humidity and CO2 content for calibration at sample gas conditions. GCU has been ...

Environnement S.A. - Model MGC 101M - Multi-gas Calibrator for Ambient Air Gas Analyzers

by Environnement S.A     based in Poissy, FRANCE

MGC 101 Multi-gas calibrator for ambient air gas analyzer calibration allows: Automatic calculation of dilution and span gas flows, based on commanded concentration, eliminates the need for any manual computation and allows rapid transition from point to pointInternally-stored mass flow controller calibration data improves accuracy (factor of ten) ...

Sonimix - Model 6000 C1 - Multipoint Multigas Calibrator

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

Due to its permeation tubes this instrument is appreciated in the area where the supplying in gas cylinder is difficult or complicated. The Multipoint Multigas Calibrator Sx 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, ...

Sonimix - Model 6000 C2 - Station Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The Sonimix 6000 C2 is the station calibration system per excellence. The multigas Mass Flow controller calibrator with GPT, ozone and self regenerable zero air generator, Sonimix 6000 C2, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, ...

MCZ - Model MK2 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system serves the mandatory zero and end point verification of gas analyzers, especially those in automated measuring networks. The use of permeation tubes instead of bottled span gases yields a reasonably priced solution for the span gads generation of, for example, SO2 or hydrocarbon components.

MCZ - Model CMK5 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system serves the mandatory zero and end point verification of gas analyzers, especially those in automated measuring networks. The zero and end points are verified with a signal from the measuring network computer; the calibration can also be activated with the keyboard at the front of the CMK.

MCZ - Model MK5 / MK10 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system MK5/MK10 is equipped with standard modules for the different methods of generating span gas based on the specific application. The generated span gas is provided depressurized for output. The MK5 series can be equipped with max. 5, the MK10 series with max. 10 modules. Used to calibrate gas analyzers in labs, service ...

MCZ - Model MicroCal5000 - Gas Compounding System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

Computer-controlled gas mixture generation for interference and response sensitivity test, linearity test, and calibration. Used for quality assurance of analyzers or gas sensors in labs, service, and working gases in production processes.

MCZ - Model CGM - Compact Calibration System for PC-Controlled

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

Compact system for PC-controlled multipoint multi-component span gas generation for up to 25 l of span gas / hour. Up to 8 gases can be mixed into one span gas. An ozone generator can be integrated to generate ozone span gas or for gas phase titration with ozone.

MCZ - Reference Lab for Quality Assurance and Interlaboratory Testing

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

PC-controlled multipoint multi-component span gas generation for up to 32 measuring stations or 25 m³ span gas / hour. Up to 16 bottled span gases can be connected and mixed into one span gas. An ozone generator can be integrated to generate ozone span gas or for gas phase titration with ozone.

MCZ - Calibration of Ozone Measuring Gas Based on the UV-Photometric Method

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

Since ozone is a very unstable gas, an ozone generator continuously producing ozone span gas is needed to calibrate ozone analyzers. This apparatus can be calibrated only to a limited extent because the ozone generator is controlled by the intensity of the UV source.

MCZ - Static Volumetric Injection According to ISO 6144

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

Mixing chamber (injection chamber) to inject a known volume of a component to generate a gas mixture with known concentration. The process is the primary standard to generate gas mixtures to calibrate gas analyzers. The development was for the most part carried out by the National EU Clean Air Reference Lab, a division of the Federal Environmental ...

MCZ - Model MK5 BNT - Modular Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

Modular calibration system primarily designed as transfer standard to synchronize analyzers in different measuring stations. Transport of the span gas cylinders normally used as transfer standard is unnecessary when using a permeation oven.

Environics - Gas Chromatography Calibration System

by Environics, Inc.     based in Tolland, CONNECTICUT (USA)

Environics Gas Mixers, Dilutors and Dividers have been the used in laboratories for over twenty years for applications including gas chromatography-mass spectrometry (GC-MS), GC with Flame Ionization Detector (GC-FID), and GC with thermal conductivity detector (GC-TCD). Our systems can produce gas concentrations from percent to ppb levels at the ...

IONICON - Model LCU - Liquid Calibration Unit

by Ionicon Analytik Ges.m.b.H.     based in Innsbruck, AUSTRIA

The IONICON Liquid Calibration Unit (LCU) evaporates aqueous standards into a gas stream, resulting in a gas flow containing compounds at defined trace concentrations. This gas can be used for precise calibration of trace gas analyzers over an extensive range of compounds and concentrations.

Need help finding the right suppliers?

Let the XPRTs do the work for you