gas dilution calibrator Equipment available in El Salvador

Available in El Salvador| Near El Salvador
26 Results found

We couldn't find any gas dilution calibrator equipment in El Salvador

Here is a list of results available in El Salvador

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Keyword: gas dilution calibrator ×

  • Available in: Latin America ×

  • Available in: El Salvador ×

IONICON - Gas Calibration Unit (GCU) - Advanced Dynamic Gas Dilution System

by Ionicon Analytik Ges.m.b.H.     based in Innsbruck, AUSTRIA

For most trace gas analyzers, calibration is the standard practice to ensure accurate quantification of target substances. The IONICON GCU has been developed to produce precisely controlled concentrations at trace levels with the possibility to adjust the gas matrix humidity and CO2 content for calibration at sample gas conditions. GCU has been ...

Sonimix - Model 2106 PreDivider - Binary Gas Calibration System

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The binary Predivider Sonimix 2106 is based on the principle of gas stream through sonic nozzles and is built according to the ISO 6145/6 normalization. Most accurate device on the market (0.5% rel.) The Sonimix 2106 PreDil is mainly used to increase the dilution range of the Sonimix 2106 or 7000 gas dividers.

Sonimix - Model 3014 - Permeation Gas Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

All those which cannot or hates transporting gas cylinders will appreciate the Sonimix 3014. Based on mass flow controller, critical orifices (nozzles) and high stability mechanical pressure regulators, the Sonimix 3014 is able to generate gases such as NO2 or SO2 using dilution or permeation technology. No cylinders, Accurate, Flexible and ...

Sonimix - Model 6000 C2 - Station Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The Sonimix 6000 C2 is the station calibration system per excellence. The multigas Mass Flow controller calibrator with GPT, ozone and self regenerable zero air generator, Sonimix 6000 C2, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, ...

Sonimix - Model 3012/3022 - Gas Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The multigas calibrator with GPT, ozone and self re‐generable zero air generator, Sonimix 3012/3022, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, CO, NOx and O3.

Sonimix - Model 6000 C1 - Multipoint Multigas Calibrator

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

Due to its permeation tubes this instrument is appreciated in the area where the supplying in gas cylinder is difficult or complicated. The Multipoint Multigas Calibrator Sx 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, ...

Sonimix - Model 3030 - Gas Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The SONIMIX 3030 is a calibration system, specially developed for simple applications.

MCZ - Model MK5 / MK10 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system MK5/MK10 is equipped with standard modules for the different methods of generating span gas based on the specific application. The generated span gas is provided depressurized for output. The MK5 series can be equipped with max. 5, the MK10 series with max. 10 modules. Used to calibrate gas analyzers in labs, service ...

MCZ - Model CMK5 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system serves the mandatory zero and end point verification of gas analyzers, especially those in automated measuring networks. The zero and end points are verified with a signal from the measuring network computer; the calibration can also be activated with the keyboard at the front of the CMK.

MCZ - Model MK5 BNT - Modular Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

Modular calibration system primarily designed as transfer standard to synchronize analyzers in different measuring stations. Transport of the span gas cylinders normally used as transfer standard is unnecessary when using a permeation oven.

MCZ - Model MicroCal5000 - Gas Compounding System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

Computer-controlled gas mixture generation for interference and response sensitivity test, linearity test, and calibration. Used for quality assurance of analyzers or gas sensors in labs, service, and working gases in production processes.

TAPI - Model T700 - Dynamic Dilution Calibrator

by Enviro Technology Services plc     based in Stroud, UNITED KINGDOM

The T700 is a microprocessor based calibrator for precision gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero calibrations using up to 4 gas sources.

IONICON - Model LCU - Liquid Calibration Unit

by Ionicon Analytik Ges.m.b.H.     based in Innsbruck, AUSTRIA

The IONICON Liquid Calibration Unit (LCU) evaporates aqueous standards into a gas stream, resulting in a gas flow containing compounds at defined trace concentrations. This gas can be used for precise calibration of trace gas analyzers over an extensive range of compounds and concentrations.

Environnement S.A. - Model MGC 101M - Multi-gas Calibrator for Ambient Air Gas Analyzers

by Environnement S.A     based in Poissy, FRANCE

MGC 101 Multi-gas calibrator for ambient air gas analyzer calibration allows: Automatic calculation of dilution and span gas flows, based on commanded concentration, eliminates the need for any manual computation and allows rapid transition from point to pointInternally-stored mass flow controller calibration data improves accuracy (factor of ten) ...

CALIB - Internal or External Calibrator

by Chromatotec Group     based in Val de Virvée, FRANCE

We propose a range of calibration systems with permeation tubes installed inside an analyzer or a multiplexer. In option, we can provide these calibration systems in a separate box. Our analyzers can control the solenoide vanne selection of a standard gas cylinder.

Environics - Model Series 2020 CEMCS - Continuous Emissions Monitoring Calibration System

by Environics, Inc.     based in Tolland, CONNECTICUT (USA)

The Environics Series 2020 Continuous Emissions Monitoring Calibration System (CEMCS) automatically generates precise gas standards for rapid multi-point and multi-scale calibration of Continuous Emissions Mon

ETG - Model CALG 100 - Calibration for Trace Gas Analyzer System

by ETG Risorse e Tecnologia     based in Montiglio, ITALY

CAL G 100 it’s a very useful gas generator to perform calibration for trace gas analyzer as well standard device . It can generate ppb level as well ppm. The system it’s composed by an thermocontrolled oven with a capacity to allow multiple permeation tube insertion , one or more MFC to a precise flow control , a pressure control ...

Tekran - Model 3342 - Sample Probes & Conditioning

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran 3342 is a customized version of an M&C Dilution Probe (Model SP2006-Hg). M&C probes are the industry standard and are well-known for their dependability and ease of servicing. The probe uses a titanium sintered filter to remove particulate matter from the sample stream. The sample is diluted and sent to the conditioner via a ...

Kelvinox - Model TLM - Top-Loading Refrigerator

by Oxford Instruments Industrial Analysis     based in Abingdon, UNITED KINGDOM

Our top-loading Kelvinox TLM is a high performance dilution refrigerator with a base temperature of less than 15 mK and cooling power of more than 400 µW. Top-loading of the sample directly into the 3He/4He mixing chamber ensures good sample thermalisation, high stability of the thermal environment and guarantee of operation in high magnetic ...

Environics - Model Series 2000-U - Ultraclean Computerized Calibration System

by Environics, Inc.     based in Tolland, CONNECTICUT (USA)

Purity of calibration gas is assured with the Series 2000 Ultraclean Gas Calibration system. Manufactured with metal seal Mass Flow controllers and orbitally welded joints, this system has minimal dead volume and maintains an ultra-low leak rate to prevent atmospheric contamination of gas calibration standards.

Related Terms for gas dilution calibrator

Need help finding the right suppliers?

Let the XPRTs do the work for you