industrial gas Equipment available in Malawi

Available in Malawi| Near Malawi
168 Results found

We couldn't find any industrial gas equipment in Malawi

Here is a list of results available in Malawi

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Keyword: industrial gas ×

  • Available in: Africa ×

  • Available in: Malawi ×

HOFGAS - Model IFM4c - Customised Industrial Gas Flare System

by Hofstetter BV     based in Schiphol-Rijk, NETHERLANDS

Customised industrial gas flare with high-temperature combustion, conceived specifically for the disposal of industrial and contaminated gases. Ideal for combustible industrial gases, such as VOC gas, pyrolysis gas, wood gas, flue gas, benzene gas and much more.

ERG - Air Pollution Control and Industrial Gas Treatment Systems

by ERG (Air Pollution Control) Ltd     based in Horsham, UNITED KINGDOM

ERG is a leader in the field of air pollution control through on our extensive knowledge and wealth of experience of the technology in this sector. Our tailor-made process designs are optimised to give the best air pollution solutions for the lowest capital and running cost, and our systems have been installed world-wide.

E-Instruments - Model BTU 4500 - Hand-Held Commercial and Industrial Gas Analyzer

by E Instruments International, LLC     based in Langhorne, PENNSYLVANIA (USA)

The BTU-4500 is a NEW hand-held commercial and industrial gas analyzer that is a valuable tool designed for emissions monitoring and maintenance and tuning of combustion processes including boilers, burners, gas and diesel engines, turbines, furnaces, kilns, heaters, and laboratory analysis.

DESMI - Model SA - Horizontal Self-Priming Centrifugal Pump

by DESMI A/S     based in Noerresundby, DENMARK

The DESMI SA pump is used for contaminated liquids as well as liquids containing air or gas for sumps, gullies and many other applications where suction lift is required.

Model MAX300-IGX ATEX - Industrial Gas Analyzer

by Extrel CMS LLC     based in Pittsburgh, PENNSYLVANIA (USA)

The MAX300-IGX ATEX Industrial Gas Analyzer is the ATEX approved version of Extrel's high performance Industrial Gas Analyzer. The MAX300-IGX system is suitable for use in ATEX Zone 1 Group II B + H2, T3 or T4 area classifications. This analyzer performs high speed process analysis using the most advanced core mass spectrometer technology ...

MIDAC - Model I Series - Industrial Gas Analyzers

by MIDAC Corporation     based in Westfield, MASSACHUSETTS (USA)

For years, MIDAC has provided customized solutions for demanding gas analysis applications. This accumulated experience uniquely qualifies us to provide 'total solutions' for virtually any gas analysis need - from environmental to industrial process applications. The versatility of I-Series gas analysis systems enables us to work with you to ...

American Meter - Industrial Gas Pressure Regulator

by Elster American Meter     based in Nebraska City, NEBRASKA (USA)

Available with 1-1/2' NPT and 2' NPT connections. The 1803 is capable of handling inlet pressures up to 125 PSI and can offer outlet pressures ranging from 3.5' W.C. to 5 PSI. The maximum flow capacity in higher pressure situations is 20,000 SCFH depending on orfice size and inlet pressure. Note: The 1800 Series can be special ordered with Full ...

Model MAX300-IG - Industrial Gas Analyzer

by Extrel CMS LLC     based in Pittsburgh, PENNSYLVANIA (USA)

The MAX300-IG Industrial Gas Analyzer is Extrel’s seventh generation of high performance, online Process Mass Spectrometers. The MAX300-IG provides real time gas analysis and is suitable for a variety of industrial applications including: Ammonia, Ethylene, Ethylene Oxide, Ambient Air Monitoring, Steel Basic Oxygen Process (BOP), Steel ...

Liquid Cylinders - Industrial Gas

by Koyuncu TAS     based in Kalamis, TURKEY

We always keep stock of EN/TPED coded liquid cylinders for immediate delivery. We service customer liquid cylinders at our repair center in Istanbul.

Industrial Gas Systems

by Cirmac International bv     based in Apeldoorn, NETHERLANDS

Cirmac supplies gas production and treatment systems for the oil, gas and (petro)chemical industry, both onshore and offshore.  All our systems are designed in accordance with international regulations and standards. We supply tailor-made, turnkey systems backed up by reliable service.

KIN-TEK - Industrial Gas Standards Generators

by KIN-TEK Laboratories, Inc. (KIN-TEK)     based in La Marque, TEXAS (USA)

KIN-TEK Industrial Gas Standards Generators [brochure] are used in industrial environments. These instrument systems use Trace Source permeation tubes to deliver calibration gas standards directly to your FTIR, GC, GC-MS, Ion Mobility Spectrometer, or any type of gas analyzer or environmental chamber.KIN-TEK Gas Standards Generators provide the ...

DATTUS - Model III - Commercial & Industrial Gas Meter

by Itron Inc.     based in Liberty Lake, WASHINGTON (USA)

The DATTUS III is a highly-accurate, solid-state gas meter suited for commercial and industrial gas measurement applications for flow rates from 800 to 56,000 actual cubic feet per hour (acfh). With no moving parts, the DATTUS meter is ideal for applications where continuous gas flow to the customer is required.

Industrial Gas Turbines

by Wood Group GTS     based in Aberdeen, Scotland, UNITED KINGDOM

As a market leading independent service provider, Wood Group GTS is focused on delivering value based maintenance solutions to our global customer base. We provide comprehensive maintenance, repair and overhaul support for the widest range of industrial gas turbines used in the power generation, oil & gas and marine markets.

Cascade - Model CT5200 - Industrial Gas Analyser

by Cascade Technologies     based in Stirling, UNITED KINGDOM

Cascade’s Industrial gas analysers implement a hybrid multicomponent system (QCL and TDL), the system’s interchangeable modular configuration will allow for up to nine lasers to detect up to 20 gases in a variety of industrial and harsh environments. . The Industrial Gas Analysers’ embedded ARM processor enables the system to ...

Industrial Gas Turbines

by Whittaker Engineering     based in Stonehaven, UNITED KINGDOM

As specialists in key areas of industrial gas turbine technology where we are able to build, fit, maintain and repair parts, we can supply highly skilled turbine fitters to your site, wherever in the world you may be. We design, manufacture and supply transport frames and containers, protection cages and guidance frames, exhaust system components, ...

Seamless Cylinders - Industrial Gas

by Koyuncu TAS     based in Kalamis, TURKEY

As the leading industrial gas equipment distributor in the region, our company acts as an exclusive agent or as a reseller for many reputable seamless gas cylinder producers.  We hold thousands of seamless gas cylinders manufactured in compliance with the EU norms at our warehouse in Istanbul for immediate shipment. Our primary partners are ...

NRP - Model 90-5000 - Industrial Gas Scrubber

by Natural Resource Protection (NRP) Group, Inc.     based in Wichita, KANSAS (USA)

No continuous AC power is required as with other large blower filtering systems. Gas is filtered with activated carbon then scrubbed with permanganate to deliver a clean air environment in manholes, lift stations and other confined spaces. Easy to install or re-locate because of the NRP's small footprint and compact size. Quiet operation in all ...

HOFGAS - Model IPM - Degassing and Flaring System

by Hofstetter BV     based in Schiphol-Rijk, NETHERLANDS

Customised solutions for safe and environmentally-friendly disposal of industrial gas. HOFGAS-IPM is comprised of one or several blower stations and the necessary components for faultless degassing. Defined control and regulation concepts guarantee safe and efficient operation.

Tekran - Model 2600-NG - Mercury Analyzer for Natural Gas and Industrial Hygiene

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 2600-NG Mercury Analyzer is designed for the analysis of gas phase sample cartridges. The system contains an atomic fluorescence detector, a dual stage thermal desorber and a data acquisition & control system. A single serial connection allows a Windows based PC to control the entire analysis process, acquire the detector ...

Need help finding the right suppliers?

Let the XPRTs do the work for you