mass flow calibrator Equipment available in Moldova

Available in Moldova| Near Moldova
31 Results found

We couldn't find any mass flow calibrator equipment in Moldova

Here is a list of results available in Moldova

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Keyword: mass flow calibrator ×

  • Available in: Europe ×

  • Available in: Moldova ×

Sonimix - Model 3014 - Permeation Gas Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

All those which cannot or hates transporting gas cylinders will appreciate the Sonimix 3014. Based on mass flow controller, critical orifices (nozzles) and high stability mechanical pressure regulators, the Sonimix 3014 is able to generate gases such as NO2 or SO2 using dilution or permeation technology. No cylinders, Accurate, Flexible and ...

Sonimix - Model 6000 C2 - Station Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The Sonimix 6000 C2 is the station calibration system per excellence. The multigas Mass Flow controller calibrator with GPT, ozone and self regenerable zero air generator, Sonimix 6000 C2, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, ...

IONICON - Model LCU - Liquid Calibration Unit

by Ionicon Analytik Ges.m.b.H.     based in Innsbruck, AUSTRIA

The IONICON Liquid Calibration Unit (LCU) evaporates aqueous standards into a gas stream, resulting in a gas flow containing compounds at defined trace concentrations. This gas can be used for precise calibration of trace gas analyzers over an extensive range of compounds and concentrations.

Sonimix - Model 6000 C1 - Multipoint Multigas Calibrator

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

Due to its permeation tubes this instrument is appreciated in the area where the supplying in gas cylinder is difficult or complicated. The Multipoint Multigas Calibrator Sx 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, ...

IONICON - Gas Calibration Unit (GCU) - Advanced Dynamic Gas Dilution System

by Ionicon Analytik Ges.m.b.H.     based in Innsbruck, AUSTRIA

For most trace gas analyzers, calibration is the standard practice to ensure accurate quantification of target substances. The IONICON GCU has been developed to produce precisely controlled concentrations at trace levels with the possibility to adjust the gas matrix humidity and CO2 content for calibration at sample gas conditions. GCU has been ...

FastFlo - Model 620S - Fast-Response Insertion Thermal Mass Air Flow Sensor

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

The FastFlo 620S is an insertion thermal mass air flow sensor, designed to give you a highly reliable, responsive and affordable air / gas mass flow meter for light industrial applications where a NEMA 4X (IP65) enclosure is acceptable.

MCZ - Model CMK5 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system serves the mandatory zero and end point verification of gas analyzers, especially those in automated measuring networks. The zero and end points are verified with a signal from the measuring network computer; the calibration can also be activated with the keyboard at the front of the CMK.

MCZ - Model MK5 / MK10 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system MK5/MK10 is equipped with standard modules for the different methods of generating span gas based on the specific application. The generated span gas is provided depressurized for output. The MK5 series can be equipped with max. 5, the MK10 series with max. 10 modules. Used to calibrate gas analyzers in labs, service ...

MCZ - Model MicroCal5000 - Gas Compounding System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

Computer-controlled gas mixture generation for interference and response sensitivity test, linearity test, and calibration. Used for quality assurance of analyzers or gas sensors in labs, service, and working gases in production processes.

MCZ - Model MK5 BNT - Modular Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

Modular calibration system primarily designed as transfer standard to synchronize analyzers in different measuring stations. Transport of the span gas cylinders normally used as transfer standard is unnecessary when using a permeation oven.

Environnement S.A. - Model MGC 101M - Multi-gas Calibrator for Ambient Air Gas Analyzers

by Environnement S.A     based in Poissy, FRANCE

MGC 101 Multi-gas calibrator for ambient air gas analyzer calibration allows: Automatic calculation of dilution and span gas flows, based on commanded concentration, eliminates the need for any manual computation and allows rapid transition from point to pointInternally-stored mass flow controller calibration data improves accuracy (factor of ten) ...

SKC - Model 220 Series - Bios Defender

by SKC Limited     based in Dorset, UNITED KINGDOM

Now more than ever, modern industry requires precisely-honed process control systems. Requirements, standards and competition have become so demanding, and the margin for error so slim, that for many organisations, ±2% or ±3% of reading standardised accuracy is no longer enough.

ETG - Model CALG 100 - Calibration for Trace Gas Analyzer System

by ETG Risorse e Tecnologia     based in Montiglio, ITALY

CAL G 100 it’s a very useful gas generator to perform calibration for trace gas analyzer as well standard device . It can generate ppb level as well ppm. The system it’s composed by an thermocontrolled oven with a capacity to allow multiple permeation tube insertion , one or more MFC to a precise flow control , a pressure control ...

TAPI - Model T700 - Dynamic Dilution Calibrator

by Enviro Technology Services plc     based in Stroud, UNITED KINGDOM

The T700 is a microprocessor based calibrator for precision gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero calibrations using up to 4 gas sources.

Model CSM2000 - Smoke Meter

by Chell Instruments Ltd.     based in North Walsham, UNITED KINGDOM

The CSM2000 is a rugged, rack mountable gas turbine engine exhaust smoke measurement system, fully compliant with SAE ARP1179. It is not intended for in-flight testing.

Environics - Model Series 2000-U - Ultraclean Computerized Calibration System

by Environics, Inc.     based in Tolland, CONNECTICUT (USA)

Purity of calibration gas is assured with the Series 2000 Ultraclean Gas Calibration system. Manufactured with metal seal Mass Flow controllers and orbitally welded joints, this system has minimal dead volume and maintains an ultra-low leak rate to prevent atmospheric contamination of gas calibration standards.

Environics - Gas Chromatography Calibration System

by Environics, Inc.     based in Tolland, CONNECTICUT (USA)

Environics Gas Mixers, Dilutors and Dividers have been the used in laboratories for over twenty years for applications including gas chromatography-mass spectrometry (GC-MS), GC with Flame Ionization Detector (GC-FID), and GC with thermal conductivity detector (GC-TCD). Our systems can produce gas concentrations from percent to ppb levels at the ...

Environics - Model Series 9100 - Ambient Monitoring Calibration System

by Environics, Inc.     based in Tolland, CONNECTICUT (USA)

The Environics Series 9100 Computerized Ambient Monitoring Calibration System is an advanced microprocessor controlled instrument for dynamic calibration of ambient air analyzers.The Environics 9100 is the unit of choice in the Air Quality Monitoring Programs of the EPA and California Air Resource Board (CARB). The Series 9100 can house up to ...

Aeroqual - Model AQM 65 - Air Monitoring Station with Integrated Calibration

by Aeroqual Ltd     based in Mount Eden, NEW ZEALAND

The AQM 65 is a fully integrated air monitoring station offering near reference levels of performance. The size of a suitcase it can be configured to measure up to 20 different gaseous and particulate pollutants and environmental parameters simultaneously. The AQM 65 offers the optimal balance between performance and price – measuring ...

Environics - Model Series 2020 CEMCS - Continuous Emissions Monitoring Calibration System

by Environics, Inc.     based in Tolland, CONNECTICUT (USA)

The Environics Series 2020 Continuous Emissions Monitoring Calibration System (CEMCS) automatically generates precise gas standards for rapid multi-point and multi-scale calibration of Continuous Emissions Mon

Related Terms for mass flow calibrator

Need help finding the right suppliers?

Let the XPRTs do the work for you