mass flow controller Equipment available in Somalia

Available in Somalia| Near Somalia
37 Results found

We couldn't find any mass flow controller equipment in Somalia

Here is a list of results available in Somalia

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • Keyword: mass flow controller ×

  • Available in: Africa ×

  • Available in: Somalia ×

OSi - Model OFS-2000C - Optical Flow Sensor (OFS) - Combustion Air Flow

by Optical Scientific Inc. (OSi)     based in Gaithersburg, MARYLAND (USA)

The OFS 2000C model is enhanced with temperature and pressure sensors to provide data for mass flow measurement. This latest development of our renowned air flow sensor offers operators more accurate control* of the combustion process resulting in increased efficiency, fuel cost savings and reduction of greenhouse gas emissions.

Protea - Gas Blender

by Protea Limited     based in Middlewich, UNITED KINGDOM

In order to accurately calibrate Protea's range of gas analyser products, it is important to have repeatable gas calibration system. Protea’s gas blender products can achieve large calibration ranges to be covered from higher concentration gas reference standards. Using the latest in Mass Flow Controller (MFC) technology, the units are ...

Sonimix - Model 6000 C2 - Station Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The Sonimix 6000 C2 is the station calibration system per excellence. The multigas Mass Flow controller calibrator with GPT, ozone and self regenerable zero air generator, Sonimix 6000 C2, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, ...

Sonimix - Model 3014 - Permeation Gas Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

All those which cannot or hates transporting gas cylinders will appreciate the Sonimix 3014. Based on mass flow controller, critical orifices (nozzles) and high stability mechanical pressure regulators, the Sonimix 3014 is able to generate gases such as NO2 or SO2 using dilution or permeation technology. No cylinders, Accurate, Flexible and ...

Model ADM 8027 - Ultrasonic Flow Meter

by FLEXIM Instruments UK Ltd     based in Northwich, UNITED KINGDOM

The FLUXUS ADM 8027 is FLEXIM's permanent flow meter for explosion hazard environments (being ATEX (IECEx) approved for usage in zones 1 and 2). With its rugged, flameproof and water-tight field-enclosure, the flow meter - which can easily be operated by a magnetic pen without having open the housing - is especially designed for its usage in rough ...

Model F709 - Rack Flow Mete

by FLEXIM Instruments UK Ltd     based in Northwich, UNITED KINGDOM

The FLUXUS F709 is the 19' rack version of the highly versatile FLUXUS F704 liquid flow meter. Internally identical to the FLUXUS F704, its non-intrusive measurement technology ensures a precise bi-directional, highly dynamic flow measurement over a wide turndown ratio. As the transducers (available also as ATEX and FM approved versions) are ...

Model PRO902C Modular - External Low Flow Dilution Probe

by Thermo Scientific - Air Quality Instruments     based in Franklin, MASSACHUSETTS (USA)

PRO902C Probe handles the toughest environments while offering significant advantages over typical in-stack dilution probes.The dilution extractive technology in combination with the thermo-electric cooler provides accurate and concise readings available in both terms of concentration and mass-emission rates. aturing an O2 fuel cell for oxygen ...

Protea - Unheated Sample Probes

by Protea Limited     based in Middlewich, UNITED KINGDOM

For measurement of gases that do not require hot measurements, Protea can supply sample probes of various material construction. This includes probes made of materials such as PEEK allowing for measurement of possible corrosive gases.

Environnement S.A. - Model MGC 101M - Multi-gas Calibrator for Ambient Air Gas Analyzers

by Environnement S.A     based in Poissy, FRANCE

MGC 101 Multi-gas calibrator for ambient air gas analyzer calibration allows: Automatic calculation of dilution and span gas flows, based on commanded concentration, eliminates the need for any manual computation and allows rapid transition from point to pointInternally-stored mass flow controller calibration data improves accuracy (factor of ten) ...

Model MAS-100 Iso MH - Air Sampler

by Merck Millipore     based in Darmstadt, GERMANY

The MAS-100 Iso MH is designed for monitoring microbiological contamination of the air in isolators. A unique safety concept permits the installation of various sampling heads for standard 90-100 mm Petri dishes at the critical control points while all electronic and moving parts remain outside the critical zone. The MAS-100 Iso MH has an ...

Sonimix - Model 6000 C1 - Multipoint Multigas Calibrator

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

Due to its permeation tubes this instrument is appreciated in the area where the supplying in gas cylinder is difficult or complicated. The Multipoint Multigas Calibrator Sx 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, ...

MCZ - Model MicroCal5000 - Gas Compounding System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

Computer-controlled gas mixture generation for interference and response sensitivity test, linearity test, and calibration. Used for quality assurance of analyzers or gas sensors in labs, service, and working gases in production processes.

IONICON - Model LCU - Liquid Calibration Unit

by Ionicon Analytik Ges.m.b.H.     based in Innsbruck, AUSTRIA

The IONICON Liquid Calibration Unit (LCU) evaporates aqueous standards into a gas stream, resulting in a gas flow containing compounds at defined trace concentrations. This gas can be used for precise calibration of trace gas analyzers over an extensive range of compounds and concentrations.

Testo - Model MD19-3E - Raw Gas Diluter

by Testo SE & Co. KGaA     based in Lenzkirch, GERMANY

MD19-3E (PND1) - The new MD19-3E is a re-engineered diluter. It keeps all advantages which a rotary diluter system brings with, the dilution ratio ranging from 1:15 up to 1:3000. Accurate dilution of aerosols usually requires precise and stable mass flow control, specially if large dilution ratios and ranges are requested. Our newly improved ...

MCZ - Model MK5 BNT - Modular Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

Modular calibration system primarily designed as transfer standard to synchronize analyzers in different measuring stations. Transport of the span gas cylinders normally used as transfer standard is unnecessary when using a permeation oven.

IONICON - Gas Calibration Unit (GCU) - Advanced Dynamic Gas Dilution System

by Ionicon Analytik Ges.m.b.H.     based in Innsbruck, AUSTRIA

For most trace gas analyzers, calibration is the standard practice to ensure accurate quantification of target substances. The IONICON GCU has been developed to produce precisely controlled concentrations at trace levels with the possibility to adjust the gas matrix humidity and CO2 content for calibration at sample gas conditions. GCU has been ...

MCZ - Model CMK5 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system serves the mandatory zero and end point verification of gas analyzers, especially those in automated measuring networks. The zero and end points are verified with a signal from the measuring network computer; the calibration can also be activated with the keyboard at the front of the CMK.

Environics - Model Series 2000-U - Ultraclean Computerized Calibration System

by Environics, Inc.     based in Tolland, CONNECTICUT (USA)

Purity of calibration gas is assured with the Series 2000 Ultraclean Gas Calibration system. Manufactured with metal seal Mass Flow controllers and orbitally welded joints, this system has minimal dead volume and maintains an ultra-low leak rate to prevent atmospheric contamination of gas calibration standards.

TAPI - Model T700 - Dynamic Dilution Calibrator

by Enviro Technology Services plc     based in Stroud, UNITED KINGDOM

The T700 is a microprocessor based calibrator for precision gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero calibrations using up to 4 gas sources.

Dwyer - Model Series 641 - Air Velocity Transmitter

by Dwyer Instruments Inc     based in Michigan City, INDIANA (USA)

The new Series 641 Air Velocity Transmitter is the ideal instrument for monitoring air flow. This transmitter uses a heated mass flow sensor which allows for precise velocity measurements at various flow rates and temperatures. The 641’s 16 field selectable ranges provides it the versatility to be selected for several air flow applications. ...

Need help finding the right suppliers?

Let the XPRTs do the work for you