Mass Flow Controller (Air Monitoring) Equipment Available In Zaire
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Automatic testing of mass flow controllers for analog and digital MFCs. Up to 250 nominal values are automatically set for the controller being tested and the test values together with the gas pressure and the gas temperature are saved in a ...
-
Manufactured by Vögtlin Instruments GmbHbased in SWITZERLAND
Reliable technology and industry standard interfaces make the red-y smart series thermal mass flow meters (MFM) and mass flow controllers (MFC) particularly suitable for measurement and control in gas delivery systems and plant engineering ...
-
Manufactured by Brooks Instrumentbased in USA
Keep critical flow processes on-target and maximize throughput with the GF135 Advanced Diagnostics Pressure Transient Insensitive (PTI) mass flow controller. The world’s first “smart” mass flow controller is a true game changer: It performs integral ...
-
Manufactured by Bronkhorst High-Tech B.Vbased in NETHERLANDS
For applications with high (differential) pressure Bronkhorst offers a special range of EL-FLOW® and IN-FLOW Series Thermal Mass Flow Meters and Controllers. Patented PN400/PN700 control valves can either be integrally or separately mounted, to measure and control gas ...
-
Manufactured by Sierra Instruments, Inc.based in USA
Precision flow measurement and control at ultra-high gas pressure is among the most challenging applications in the flow industry. Leaks, gas behavioral changes and unpredictable valve control can all lead to reduced ...
-
Manufactured by Bronkhorst High-Tech B.Vbased in NETHERLANDS
Bronkhorst model F-111B Mass Flow Meters (MFMs) are suited for precise measurement of flow ranges between 0,16…8 mln/min and 0,16…25 ln/min at operating pressures between vacuum and 100 bar. The MFM consists of a thermal mass flow sensor and a microprocessor based pc-board with signal and fieldbus ...
-
ShowcaseManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran 2537 performs continuous long-term, unattended analysis of gaseous elemental mercury with unmatched accuracy, sensitivity, and reliability. The Tekran 2537 is easy to setup, use, and maintain and has long been known for its stable performance in rugged conditions. Our instruments have been installed at both Polar Regions, on ocean research vessels and hundreds of locations in between. ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 7100 is a gas mixer mainly used to calibrate and linearize gas monitors and to generate specific gas mixtures. The Sonimix 7100 is based on the principle of gas flow through MFC (Mass Flow Controllers) and is built according the ISO 6145/7 standards. This instrument provides a very high flexibility allowing to combine ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multigas Sonimix 6000 C2 calibrator is designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, for parameters such as SO2, HC, BTX, CO, NOx and O3. The Sonimix 6000 C2 includes Mass Flow Controllers, GPT, ozone and self re-generable zero air generator and is ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 6100 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, O3, hydrocarbons and other gases of interest. The system consists of a single chassis supporting up to three (3) thermal mass flow controllers, an ozone generation module, a mixing zone, a reaction chamber for gas ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 7050 is a simplified gas mixer based on the principle of gas stream through mass flow controllers (MFC) and mainly used to calibrate and linearize Gas Monitors. Built according to the ISO 6145/7 normalization, the Sonimix 7050 is totally compatible with the US EPA methods and can be easily linked with National Standards (NIST, ...
-
PremiumManufactured by Environics, Inc.based in USA
The Series 4000 consists of a single chassis now supporting up to eight mass flow controllers. The mass flow controllers are factory calibrated using a primary flow standard traceable to the United States National Institute of Standards and Technology (NIST). Each ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
with the two MCA modules, the mass flow controller and the weather data ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
calibrations and standard additions to be automatically initiated. The unit generates concentrations of mercury by using a NIST traceable temperature controlled saturated mercury vapor source. Precision mass flow controllers are used to dilute the output of this source to the desired value. The unit is capable of continuously ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 9100 Computerized Ambient Monitoring Calibration System consists of a single chassis supporting up to three (3) thermal mass flow controllers, an ozone generation module, a mixing zone, a reaction chamber for gas phase titration and control electronics. The Series 9100 is operated through a large, ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 1403 is a reliable, easy-to-use multipoint sampler and doser. It combines with the Innova 1512 photoacoustic gas monitor and a controlling computer featuring the Innova 7650 basic ventilation software to offer numerous monitoring ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multipoint multigas calibrator SONIMIX 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, NOx and O3. With the optional Ozone generator and GPT circuitry it is possible to verify the coherence of NO, NO2 and O3 ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Inhalation of vapor is the primary route of elemental mercury toxicity in the workplace environment. The Tekran 2537Xi-IH Industrial Hygiene Monitor provides continual analysis of Hg levels in workplace air in a simple to deploy turn-key unit. This system can be customized according to customer needs including: number of monitoring locations, audible and visual alarms, and site-specific visual ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The DC-200 Dynamic Diluter uses high-precision mass flow controllers (MFC) to accurately controls the flows of dilution gas and standard gas so as to get standard gas of required concentrations. The standard gas path is made of passivated stainless steel tubes and is heated throughout to reduce the impact of ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The continuous mode permanent gases monitor. A highly automated system for routine field measurement of permanent gases on the range. The chromaTCD is an automatic industrial gas analyser. The sample comes through the sampling loop. Then the sample is injected into an analytical column for separation. The system uses packed or capillary ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you