Showing results for: Meteorology Sensor (Air Monitoring) Equipment
-
Manufactured by Pawan Exportsbased in INDIA
Anemometer, Hand Held Anemometer. ...
-
Manufactured by Envirabased in SPAIN
be connected to a rain gauge and to a solar radiation ...
-
Manufactured by Automasjon and Data ASbased in NORWAY
Meteorological sensors normally includes sensors to measure Air Temperature, Air Humidity and Barometric Pressure. Rainfall sensors, Solar Radiation and others can also be included. A+D can deliver sensors from different manufacturers with different qualities, however only those robust enough to survive the harsh ...
-
Manufactured by Envirabased in SPAIN
Wind speed and direction are measured with conventional techniques. The other parameters are inside a radiation shield with multiple plates to reduce the errors due to solar radiation and to allow air to enter through the shield. The temperature sensor is a platinum RTD. Humidity uses a solid sensor. The temperature sensor is ...
-
Manufactured by Envirabased in SPAIN
The 597 is an integrated system to measure temperature, relative humidity and barometric pressure. All the elements are high quality and designed for harsh environments. All the components are within a radiation shield with aspiration. It has digital and analogical outlets for maximum ...
-
Manufactured by Beijing Guoxinhuayuan Technology Co., Ltd (BGT)based in CHINA
BGT-PM2512 Detecting the concentration of particulate matter with diameter less than 2.5 microns and less than 10 microns in theair.The principle of laser scattering is adopted, that is, the laser is irradiated on the suspended particulate matter in the air to generate scattering, and the scattered light is received by the detector at a certain Angle,and the generated photocurrent is amplified to ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The AT2 is a high accuracy, shielded probe for air temperature measurement. Thermistor type - ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The GT1 is a general purpose probe based on a thermistor sensor. This is housed in a stainless steel sheath of 4.8 mm nominal outside diameter, 125 mm long, connected to a 5 m cable. Thermistor type – 2K (see specification for full details). Sensor can be buried in the soil or exposed for air temperature measurements. (subject to ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
RHT4nl RH/Precision Air Temp Sensors (10k thermistor). Fitted with 2m cable. Both mounted in same solar radiation shield. RH accuracy +/- 2% RH, 5 to 95%. Precision Thermistor Temp Sensor accuracy (+/-0.2 deg C, -30 to 70 deg C). Temperature output non-linear. Supported for use with GP1 Data Logger ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
Fitted with 2m cable. Both mounted in same solar radiation shield. RH accuracy 2%. Temp Sensor with linearised voltage output (+/-0.5 deg C, -20 to 80 deg ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
Fitted with 2m cable. Both mounted in same solar radiation shield. RH accuracy 2%. Precision Thermistor Temp Sensor (+/-0.1 deg C, 0 to 70 deg C), with non-linear ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The ST1 is a soil temperature probe based on a thermistor sensor. This is housed in a stainless steel sheath of 4.8 mm nominal outside diameter, 125 mm long, connected to a 5 m cable. Thermistor type – 2K (see specification for full details). Sensor can be buried in the soil or exposed for air temperature measurements. ...
-
Manufactured by OTT HydroMet - Veraltobased in GERMANY
The OTT Pluvio²S weighing precipitation gauge measures the intensity and cumulative precipitation in a broad measuring range from 0 to 3,000 mm/h. The professional rain gauge is a further development of the tried-and-tested OTT Pluvio², with state-of-the-art technology in a compact design that captures up to 400 mm of precipitation on a collecting area of 200 cm². It is virtually ...
-
Manufactured by OTT HydroMet - Veraltobased in GERMANY
The compact, long-term stability weather sensor OTT TRH is responsible for the measurement of relative humidity and temperature. In addition it can calculate the values for absolute humidity, dew point and mixing ratio and output these via the SDI-12 interface. A protective cap prevents dust and dirt from entering the sensor system. The ...
-
Manufactured by All Weather, Inc.based in USA
The 8364 Dual Technology Visibility Sensor measures transparency of the atmosphere and calculates its extension coefficient and meteorological optical range (MOR) values. Using both direct attenuation and forward scatter technologies the 8364 can measure airborne particle sizes once available only from a transmissometer while ...
-
Manufactured by OTT HydroMet - Veraltobased in GERMANY
The accurate wind sensor uses the run-time differential method for determining the wind speed and wind direction. It provides output for instantaneous values, vector and scalar means, the maximum gust of wind and wind direction, the maximum/minimum values and the virtual temperature. Data output through serial or analogue interfaces ...
-
Manufactured by Felix Technology Inc.based in CANADA
Temperature sensor FT2030 series are equipped with platinum resistance thermometers Pt100, DIN 60751 B, tolerance class1/3 DIN, with 4-wire connection and 5m cable. The sensor is placed in plastic shaft and screwed into the base plate by means of a cable duct. The base plate is for senor mounting using two M8-screws, 30 mm apart. The ...
-
Manufactured by Felix Technology Inc.based in CANADA
The Aspirator Psychrometer FT3060 series are used for measuring the air temperature and the humidity. Two parallel mounted, equal mercury thermometers are used. The bulb of one thermometer (wet bulb thermometer) is covered by a wick, which must be moistened for a ...
-
Manufactured by Felix Technology Inc.based in CANADA
Humidity/Temperature FT3030 series Sensors are used for the measurement of the relative humidity and the air temperature simultaneously. A capacitive measuring element is used for the measurement of the relative humidity and a PT100 is used for the measurement of the air temperature. Both sensors are located in a measuring probe, ...
-
Manufactured by LSI-LASTEM srlbased in ITALY
LSI LASTEM produces a wide range of meteorological sensors addressed to their own data acquisition devices as well as to third party data management systems. LSI LASTEM high-quality sensors, the synthesis of almost 40 years of experience in environmental technology instrumentation, have been carefully designed and produced to guarantee ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you