Air Monitoring Equipment For Air And Climate In USA
-
ShowcaseManufactured by Mobiltex Data Ltdbased in CANADA
Robust, reliable, and cost-effective temperature monitoring of pipeline assets is now available from MOBILTEX, engineered for performance in even the most extreme and remote locations. The MOBILTEX TS1 configurations enable field technicians to install remote, battery-powered GPS-enabled temperature sensing capabilities that are compatible with our CorTalk RMU1 platforms. Measurement data is ...
-
ShowcaseManufactured by Ecomesurebased in FRANCE
We spend more than 80% of our time indoors. However, indoor air can be up to eight times more contaminated than outdoor ...
-
ShowcaseManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Measure Gases in Ambient and Humid Conditions. Gasmet CX4015 is designed for continuous monitoring applications in ambient conditions, such as workplace air monitoring and quality control applications. It can be used to measure up to 50 components simultaneously, and additional gases can be easily added without any hardware changes. The sample cell can be heated up to 50 °C, which allows ...
-
ShowcaseManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
SCI’s sensor division incorporates state of the art sensor technology that has been enhanced with a machine learning calibration system and convenient cloud-based data acquisition platform. SCI sensor products merge with the Internet of Things (IoT), digital electronics, machine learning, and data visualization technologies to deliver precise air quality and meteorological data in ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
SpectroECL combines in one equipment a biopotentiostat/galvanostat and a microspectrometer integrated in an innovative cell for Screen-Printed Electrodes. This miniaturized and portable alternative is perfect for performing Electrogenerated ChemiLuminescence (ECL) ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrohm AeRosol Sampler "MARS" is a simpler solution for aerosol monitoring. The MARS can be used as a preconditioning unit for various analytical applications under ambient conditions or in industrial environments. No sample storage is required. ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The GAS-804DTE Series Air Sampling Systems are designed for remote unattended continuous air sampling applications. The GAS-804DTE Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flow rate. The flowrate range attainable through the filter media is dependent upon the air porosity of the filter media. The GAS-804DTE Series design ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
Features flow monitoring with an additional output parameter for temperature. The transmitter can be configured to provide a solid state output with changes in flow and temperature. Ideal for semiconductor flow applications monitoring air flow to cool their process by providing a signal when there is significant deviation in the flow rate or air temperature. Relay contacts are available. Wetted ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Highly sensitive TOC trace analysis by wet chemical UV digestion. Lowest operating costs - no catalyst or combustion tube, no additional reagents Extension of the TOC working range to up to 10,000 ppm by means of an oxidation reagent that can be easily produced by the ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multipoint multigas calibrator SONIMIX 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, NOx and O3. With the optional Ozone generator and GPT circuitry it is possible to verify the coherence of NO, NO2 and O3 analysers, and to determine the converter’s efficiency ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC/PID for automatic monitoring of BTEX in air, water and soils This instrument uses a port valve with a single absorbent trap, and a 30 meter metallic 0.28 mm ID column. Minimum detection level as low as 10 ppt for application Benzene or 1,3-Butadiene in ambient air. Miniaturization, sensitivity, mobility and flexibility are its main features. Everything from the sample port up to the data ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FS10i is a compact, economical solution to air and compressed air flow metering. It is the first, and currently only, thermal mass flow meter to meet SIL 2. Utilizing application proven thermal mass flow technology, the FS10i provides a highly accurate and repeatable linearized 4-20 mA output of flow rate. Additionally, for applications benefiting from a high or low flow alarm point, the ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
The plant is controlled and policed by an all encompassing supervisory propriety human machine interface based control system. The system will constantly monitor the plants performance and automatically trim and correct any out of tolerance ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Sorbent trapsprovide total mercury measurement as well as speciated mercury measurement (oxidized and elemental mercury phases). The flue gas sample is collected using a heated sample probe and calibrated pumping system. Mercury is captured by adsorption in sorbent traps media. The material in these traps is later analyzed using Zeeman mercury analyzer RA-915M and PYRO-915+ attachment. Traps are ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
As part of a facility monitoring solution, the Airnet® II and IIs Particle Sensors from Particle Measuring Systems are an EU GMP Annex 1 solution that meets the specifications of ISO 21501-4 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing particles. A simple and cost-effective way to monitor your cleanroom, the Airnet II Air Particle ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model DF28BMHTE heavy duty hand truck mounted mobile low volume air sampler designed for outdoor use with digital flowmeter and an adjustable, stainless steel sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 4’ to 7’ (122 – 213 cm) above floor level. Model DF28BMHTE contains state of the art microprocessor electronics, which provides for ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Wide aperture lens optics capture more light in low-light applications. Signals come faster and are stronger. Small footprint to maximize the use of laboratory bench space. Available as either a PC-operated unit or as a stand-alone instrument with an integrated color touchscreen. Overhead white, green, red and blue LEDs come as standard in the series. “Slide2Hide“ door or fold down ...
-
PremiumManufactured by Environics, Inc.based in USA
Purity of calibration gases is assured with the Series 4040 Ultra-High Purity (UHP) Gas Dilution System. Manufactured with metal seal MFC’s and orbitally welded joints, the system has minimal dead volume and maintains a low leak rate to prevent atmospheric contamination of gas calibration standards. An ideal system for providing those in the semiconductor, aerospace, research/biotech and ...
-
PremiumManufactured by Ecomesurebased in FRANCE
Ambient air quality varies over the course of a day and even from one street to another. Road traffic, street plans, weather conditions and construction works contribute to these fluctuations. EcomTrek is a mobile outdoor air quality monitor designed to improve understanding of air pollution by measuring air quality at finer and broader spatial and temporal ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD AL is the next generation in one-channel high precision ambient air monitoring instrumentation. Unique in speed and reliability, the nCLD AL is modular designed and capable of sequentially measuring NO, NO2 and NOx. The analyzers expandable capabilities allow assessment of additional nitrogen based parameters. Its graphical user interface “GUI“ also individually displays ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you