Air Monitoring Equipment in Indiana

19 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Air Monitoring ×

  • In: USA ×

  • In: Indiana ×


CMC SmartCEMS-75 - Model SCUS75 - Predictive Emission Monitoring System

by CMC Solutions, LLC     Distributor in INDIANA (USA)

The SmartCEMS-75 PEMS or predictive emission monitoring system (PEMS) is a complete system that provides continuous data recording and report generation compliant under U.S. EPA 40 CFR Part 75 regulations. The system comes with a data acquisition component and is guaranteed to meet 40 CFR Part 75, Subpart E for combustion turbines and gas/oil ...

CMC SmartCEMS-EU - Model SCEU - Predictive Emission Monitoring System

by CMC Solutions, LLC     Distributor in INDIANA (USA)

The SmartCEMS-EU PEMS or predictive emission monitoring system (PEMS) is a complete system that provides continuous data recording and report generation compliant under U.S. EPA 40 CFR Part 75 regulations. The system comes with a data acquisition component and is guaranteed to meet EU standards for combustion turbines and gas/oil fired boilers, or ...

CMC SmartCEMS-60 - Model SCUS60 - Predictive Emission Monitoring System

by CMC Solutions, LLC     Distributor in INDIANA (USA)

The SmartCEMS-60 PEMS or predictive emission monitoring system (PEMS) is a complete system that provides continuous data recording and report generation compliant under U.S. EPA 40 CFR Part 60 regulations. The system comes with a data acquisition component and is guaranteed to meet 40 CFR Part 60, Appendix B, PS-16 audit standards on combustion ...

MONSOL - Model Dilution Series - Continuous Emissions Monitoring Systems

by Monitoring Solutions     based in Indianapolis, INDIANA (USA)

A Dilution CEMS offers the lowest maintenance of any CEMS by it's elimination of sample conditioners and pumps. Compressed air is used to 'power' the Dilution CEMS. It is sent up the stack where it is mixed with the stack gas at a 100:1 ratio (typ.). The sample is then pushed down to the analyzers. Besides the stack gas being diluted, the moisture ...

MONSOL - Model Extraction Series - Continuous Emissions Monitoring Systems

by Monitoring Solutions     based in Indianapolis, INDIANA (USA)

Extraction CEMS are the most commonly used CEMS today. They are accurate and reliable to very low pollutant levels (single digit ppm). Today's Extraction CEMS are built to run 24/7, 365 days a year. Given the right stack conditions, they are easy to operate and maintain.

CMC SmartCEMS - Model Probe - Predictive Emission Monitoring System (PEMS)

by CMC Solutions, LLC     Distributor in INDIANA (USA)

The SmartCEMS Probe is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Probe will meet the requirements for sampling during model development and PEMS QA activity. The Probe is ...

MONSOL - Continuous Emissions Monitoring Systems Analyzers

by Monitoring Solutions     based in Indianapolis, INDIANA (USA)

Monitoring Solutions is proud to offer a complete line of CEMS analyzers for upgrades and replacements. For both dilution and extraction systems, we offer analyzers for the most common CEMS gases including: NOx, SO2, CO, CO2 O3, and NH3.

CMC SmartCEMS - Model SCAEMS - Alternative Emissions Monitoring Systems

by CMC Solutions, LLC     Distributor in INDIANA (USA)

The SmartCEMS Alternative Emissions Monitoring System is a complete system that provides continuous data recording and report generation compliant under U.S. EPA Alternative Emissions Monitoring Systems (CAEMS) regulations. The system comes with a data acquisition component and is guaranteed to meet CAM and U.S. EPA standards for combustion ...

GENie - Model QC-1 - Ammonia Calibration Gas Instrument

by Advanced Calibration Designs, Inc. (ACD)     Distributor in DeMotte, INDIANA (USA)

The GENie QC-1 is our newest gas instrument for ammonia calibration gas. By utilizing a sealed glass ampule that is broken for use, the GENie QC-1 is the perfect tool for anyone calibrating fixed or portable ammonia sensors. With user adjustable outputs, the GENie QC-1 can be set to a wide range of outputs allowing for calibration of nearly any ...

GENie - Model EC - Calibration Gas Instrument

by Advanced Calibration Designs, Inc. (ACD)     Distributor in DeMotte, INDIANA (USA)

This instrument has been specifically tailored to fit the high PPM range of hydrogen detectors. The GENie EC output can be adjusted down in order to accommodate the calibration of the low level leak checking instrumentation currently on the market.

ETI - Model ADH Netcom - Automatic Waveguide Dehydrator with Ethernet Communications

by Environmental Technology, Inc.     based in South Bend, INDIANA (USA)

The ADH NETCOM automatic waveguide dehydrator supplies low pressure dry air to keep waveguide and coaxial cable dry. 

Jack-O-Matic

by Glas-Col     based in Terre Haute, INDIANA (USA)

Use with Therm-o-Watch or Temp-o-Trol controllers in running mildly exothermic reactions. Provides an added measure of safety when using hot oil baths. Air operated lab jack that can perform functions such as raising and lowering heating mantles, oil baths and cold baths. JOM operates on laboratory compressed air (20-50 psig). A convenient, safe ...

Model Detective+ - Detective Wireless Will Transmit Gas Alert Signals

by Crowcon Detection Instruments Ltd - a Halma company     Distributor in INDIANA (USA)

Detective Wireless is a module that can replace interconnecting cables for Detective and Detective+. Detective Wireless will transmit gas alert signals and other alarms wirelessly between Detective units using a 433MHz signal up to 100 metres in distance. Detective Wireless uses the proven RICOCHET mesh network. When establishing a mesh network, ...

OXY-PILOT - Natural Gas Burners

by Maxon Corporation - a Honeywell Company     based in Muncie, INDIANA (USA)

The MAXON OXY-PILOT is designed for operation with MAXON OXY-THERM LE gas burner with a capacity of up to 25,000 BTU/hr (7.3 kW). With the OXY-PILOT, burner operation may be fully automated without the additional expense of combustion air supplies or retracting ignitors.

OXY-THERM - Model TITAN - Compact Flame Oxy-Fuel Burner

by Maxon Corporation - a Honeywell Company     based in Muncie, INDIANA (USA)

High temperature oxy-fuel flame reduces consumption. Sealed, self-cooling design minimizes air infiltration and maintenance. Wide variety of capacities and large turdown ratio (8:1) provide precise process temperature control. Compact flame geometry for easy integration in most processes. Typical applications include ladle heating, reheat ...

OXY-THERM - Model LE - Natural Gas Burners

by Maxon Corporation - a Honeywell Company     based in Muncie, INDIANA (USA)

OXY-THERM LE Natural Gas Burners provide the lowest NOx levels of any industrial oxygen/fuel burner, regardless of oxygen purity. NOx levels are up to 70% lower than conventional oxy-gas burners and up to 50% lower than conventional oxy-oil burners. OXY-THERM LE Industrial Burners have substantially improved product quality worldwide while ...

Dwyer - Model Series 641 - Air Velocity Transmitter

by Dwyer Instruments Inc     based in Michigan City, INDIANA (USA)

The new Series 641 Air Velocity Transmitter is the ideal instrument for monitoring air flow. This transmitter uses a heated mass flow sensor which allows for precise velocity measurements at various flow rates and temperatures. The 641’s 16 field selectable ranges provides it the versatility to be selected for several air flow applications. ...

Watchman - Model DP - Differential Pressure Monitor

by Omnitec Design, Inc.     Distributor in INDIANA (USA)

The Watchman DP Monitor is designed for monitoring differential pressure in work areas on abatement and restoration projects. It is simple to setup outside the containment with a tubing connection from Watchman to the contained work area. With containment air pressure monitoring using The Watchman DP monitor, work space integrity can be closely ...

Model Classic - Industrial Mower

by Dixie Chopper     based in Coatesville, INDIANA (USA)

The Classic is the ultimate mowing machine with the perfect combination of commercial quality with industrial features. Power and More Power - Choose from a 27 or 35 horsepower Kawasaki® FX, 34 horsepower Kohler® EFI, or 36 Vanguard® engine to power through the tough jobs with ease. Strongest Frame - The Classic boasts the strongest ...

Need help finding the right suppliers?

Let the XPRTs do the work for you