Air Monitoring Equipment For Air And Climate In Mississippi
-
Manufactured by Keith Huber Corporationbased in USA
Developed in 2008, the Knight LR incorporates all of the features of the KingVac® with the patented filtration technology of the AirLord®. The ability to efficiently move dry product combined with the deep vacuum of our 3700 CFM liquid ring pump allows the Knight™ to excel at a variety of tasks such as: hydro-excavation, hazmat response, jetting and general industrial cleaning in ...
-
Manufactured by National Filter Media (NFM)based in USA
Midwesco Filter Resources/TDC Filter's CFS (Composite Filter System) cartridge for gas turbine applications is a static filter that combines a pre-filter barrier and a cartridge filter. The pre-filter can be changed several times before the main filter will need to be changed, reducing costs over time. This filter is commonly used in LM6000 and LM5000 systems. The CFS filter is designed for ...
-
Manufactured by Forestry Suppliers, Inc.based in USA
This data logger uses an internal temperature sensor and up to three external sensors (each sold separately). Real-time weather conditions are shown on the LCD display. Other features include a clock for data time and date and a non-volatile EEPROM memory which retains memory even if the data logger’s battery fails. The logger’s internal temperature sensor has a measurement range from -4°F to ...
-
Manufactured by Forestry Suppliers, Inc.based in USA
Revolutions of impeller are sensed electronically and transmitted to a hand-held counter unit that features start, stop, and clear functions. Revolutions per unit of time can be translated into stream velocity using a conversion chart. May be used in brackish water or salt water. Fitted with a re-settable LCD counter, this flowmeter eliminates the need for tiresome calculations. Comes complete ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS 6-inches (152mm) Gas Vapor Implant Installation Kit are used for permanent soil gas monitoring, UST monitoring, groundwater sampling, air sparging, vapor extraction monitoring, and as a pressure measurement point in vacuum testing. This kit allows a user to obtain or collect a soil gas sample by positioning or placing a 6” implant in the subsurface, and subsequently withdrawal a sample ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS Vapor Implants have double woven stainless steel wire screens with a .0057-in. (0.15mm ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME Y type Strainer is the most cost effective, Y strainer uses perforated wire mesh or wedge wire to trap unwanted solids from a process stream. Y strainer can be mounted vertically or horizontally in a piping system Strainers are low-cost solutions to large nominal bore straining ...
-
Manufactured by Sierra Instruments, Inc.based in USA
The 780S is North America's #1 selling inline thermal mass flow meter (2009 Flow Research, Boston MA). Our ultra high purity 780S-UHP is the industry-choice for bulk gas distribution service in semiconductor fabs, in pharmaceutical production and other ultra-clean processes. Real-time monitoring of gas usage provides reliable information on consumption and usage patterns in the manufacturing area ...
-
Manufactured by EndressHauser Optical Analysis, Inc.based in USA
SpectraSensors SS2000e Single Channel Analyzer for H2O or CO2 is extremely reliable and tailored for the needs of the natural gas industry. The sensor measures gas using a patented Tunable Diode Laser (TDL) to determine the concentration of the gas without coming into physical contact with the ...
-
Manufactured by Norwesco, Incbased in USA
Our chemical injection tank system is designed for applications in the oil and gas industry. The package includes a leg tank, stand, and enclosed containment basin. The enclosed containment basins have a pump mount, a 2' and a 3' female threaded connection for additional items such as solar ...
-
Manufactured by NovaLynx Corporationbased in USA
The 200-05305 Wind Monitor-AQ is a high resolution wind sensor designed specifically for air quality applications. It combines simple, corrosion-resistant construction with low threshold, fast response and excellent fidelity. The Wind Monitor-AQ meets the requirements of the following regulatory agencies: U.S. Environmental Protection Agency-Ambient Monitoring Guidelines for Prevention of ...
-
Manufactured by FLIR Commercial Systems Inc - Extech Instrumentsbased in USA
This portable battery coolant/glycol Refractometer is easy to operate refract meters provide accurate and repeatable measurements on easy to read scales. The RF40 measures the freezing point of automotive coolants (propylene glycol and ethylene glycol) and indicates the specific gravity of battery acid and provides a quick reference of battery charge condition. Complete with one year warranty, ...
-
Manufactured by Spectrum Technologies, Incbased in USA
Temp/RH/CO2 Meters - Choose from Handheld Model and Indoor ...
-
Manufactured by NovaLynx Corporationbased in USA
The 380-280 Solar Radiation Shield is a low cost solution for protecting temperature and relative humidity probes. It consists of four molded plastic plates and a powder coated aluminum mounting arm. The wedge-shaped plates provide maximum airflow around the probe while at the same time minimizing direct exposure of the probe tip to sunlight. The shield is shaped to allow natural air convection ...
-
Manufactured by FLIR Commercial Systems Inc - Extech Instrumentsbased in USA
The AN320 is a Large Vane CFM/CMM Anemometer/Psychrometer plus CO2. This meter measures Air Velocity, Air Flow, Relative Humidity, Wet Bulb, Dew Point and Carbon Dioxide. Extech’s Large Vane Thermo-Anemometer series allows for more precise readings on larger size ducts. Min/Max, Data Hold, and Auto power off functions. Complete with 4 AAA batteries and hard carrying ...
-
Manufactured by FLIR Commercial Systems Inc - Extech Instrumentsbased in USA
Convenient 10-in-1 Environmental Meter measuring Air Velocity, Air Flow, Air Temperature, Type K Temperature, Heat Index, Humidity, Wet Bulb, Dew Point, Windchill, and Light Level. Includes built-in low friction ball bearing mini vane wheel, a precision photo diode with cosine and color correction filter, and a capacitive humidity sensor for high accuracy. The Type K input accepts standard Type K ...
-
Manufactured by FLIR Commercial Systems Inc - Extech Instrumentsbased in USA
The EN100 is a Compact Hygro-Thermo-Anemometer with Light Sensor. 11-in-1 Environmental Meter for indoor and outdoor conditions. Built in light sensor measures light level. Auto-rotating display depending on selected function. Also measures Air Velocity, Air Flow, Temperature, Humidity, Wet Bulb, Dew Point, Heat Index, Wind Chill, Barometric Pressure and Altitude. Complete with built-in ...
-
Manufactured by FLIR Commercial Systems Inc - Extech Instrumentsbased in USA
The AN320 is a Large Vane CFM/CMM Anemometer/Psychrometer plus CO2. This meter measures Air Velocity, Air Flow, Relative Humidity, Wet Bulb, Dew Point and Carbon Dioxide. Extech’s Large Vane Thermo-Anemometer series allows for more precise readings on larger size ducts. Min/Max, Data Hold, and Auto power off functions. Complete with 4 AAA batteries and hard carrying ...
-
Manufactured by FLIR Commercial Systems Inc - Extech Instrumentsbased in USA
Rotating cups provide accurate air velocity measurements Wide range air velocity measures m/s, ft/min, km/hr, and knots Dual LCD digital display of Air Velocity and Temperature Record Max and Min values Datalogger stores up to 100 readings Water resistant housing Complete with four AAA ...
-
Manufactured by FLIR Commercial Systems Inc - Extech Instrumentsbased in USA
Compact indoor/outdoor meter for measuring up to 7 environmental parameters, Built-in multiparameter sensors measure Air Velocity, Heat Index, Wet Bulb Globe Temperature (WGBT), Humidity, Ambient Temperature, Dew Point, Wet Bulb, Temperature, and Windchill, MIn/Max/Average (5sec/10sec/13sec), Data Hold, Auto Power Off with disable, Replaceable Mini impeller (vane), Complete with CR2032 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you