Air Monitoring Equipment For Air And Climate Near Romania
-
Manufactured by Amandus Kahl GmbH & Co. KGbased in GERMANY
Our continuous cellular wheel weighers are designed for measuring and recording mealy, powdery, fibrous and structured products. The AMANDUS KAHL continuous cellular wheel weighers offer precise measurement of bulk materials with a wide range of surfaces. Our load cells continuously measure the weight of the filled cellular wheel and thus an instantaneous weight of the varying product flow. ...
-
Manufactured by ION Science Ltd.based in UNITED KINGDOM
The Ion Science MiniPID 2 HS is a simple plug and play sensor designed to detect a wide range of volatile organic compound gases (VOCs) at sub ppb concentrations. Designed for OEMs, the MiniPID 2 HS high sensitivity PID sensor is the latest in the range of PID sensors from Ion Science for sub-ppb level detection. The ground-breaking MiniPID 2 HS is 15 times more sensitive than the existing ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Laboratory-precise five components gas analysis, anywhere according to DIN EN 15267 - 3, DIN EN 14181. Approved as Standard Reference Method (SRM) for: CO (DIN EN 15058). O2 (DIN EN 14789). NOx (DIN EN ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Airnet II is ideal for remote continuous particle monitoring as a component of a Facility Monitoring System. It meets the specifications of ISO 21501-4 and EU GMP Annex 1 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing particles. The Airnet II Particle Sensor provides unparalleled performance with data transmission capabilities for ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Dilution of gases with high accuracy and precision requires high quality mfc’s, especially for high dilution ratios and ranges. Consequently HORIBA’s APMC-370 is equipped with digital mfc’s. These mfc’s are factory calibrated, optional also with a special Polynomial Calibration. HORIBA Europe‘s APMC-370 is designed to calibrate gas analyzers manually, remotely ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The OPSA-150 is a new organic pollutant monitor that uses HORIBA's proprietary Rotary Cell Length Modulation, a measuring technique incorporating 25 years of expertise. The unit can be used as an organic pollutant monitor at drainage systems for determining compliance with COD monitoring regulations, for monitoring quality of water measuring levels of organic matter at water supply intakes, and ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
HORIBA designs, assembles, calibrates and tests complete integrated systems for simultaneously measuring multiple pollutants. A system for monitoring five pollutants can typically fit into one 19-inch rack. Rack-mounted systems can be installed in equipment rooms, stand-alone shelters, trailers, vans, large trucks, or aboard vessels. HORIBA can integrate products into existing monitoring systems, ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Purpose-built nano condensation particle counter CPC designed for use in the most critical fab spaces. The NanoAir™ 10 Condensation Particle Counter (CPC) is a revolutionary new product from Particle Measuring Systems (PMS). It provides the sensitivity of a CPC with the ease of use and functionality of a traditional cleanroom particle counter. Designed to monitor ultra-clean environments, ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 2505 Mercury Vapor Calibration Unit is an ultra-precise and accurate closed-vessel, saturated gaseous mercury source. The 2505 utilizes a thermoelectrically cooled mercury reservoir and dual temperature sensors calibrated against a US National Institute of Standards and Technology (NIST) traceable source producing exceptionally accurate Hg delivery. The mercury vapor is delivered ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The BioCapt® Single-Use Microbial Impactor helps minimize false positives for microbial activity in pharmaceutical cleanrooms by reducing contamination from handling of agar plates. This results in a decrease in investigations while increasing productivity. Additionally, many costly and time consuming sterilization steps, such as autoclaving, disinfecting, handling and logistics are ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Ideally suited for aseptic environments, the MiniCapt Remote Microbial Air Sampler simplifies the job of microbial air sampling by applying modern data management capabilities that save time and reduce operator error in air sampling data. The MiniCapt Viable Microbial Sampler uses a unique HEPA-filtered exhaust so it doesn’t contaminate the cleanroom. With a small footprint, the MiniCapt ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
When remote and flexible monitoring with no fixed sampling point is needed, the Remote Isolator Kit allows for samples to be taken at a distance while maintaining the integrity of the measurement. The Kit uses a remote sample head where the measurement is taken in-situ and the control of the MiniCapt instrument is performed outside the critical area. It can also be integrated into a facility ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The MerPAS Passive Air Sampler is the newest Tekran sampling solution developed to provide our customers a simple device for measuring mercury in a wide range of environments. The sampler can be configured to sample either background ambient air or highly-contaminated industrial locations. Since collection is passive, MerPAS sampling is completely power-free allowing easy deployment in a wide ...
-
Manufactured by Raymetrics S.A.based in GREECE
New era in remote PM Monitoring. Heavy industry mining and metal processing companies are constantly in search of suspended particles emissions mitigation solutions in order to minimize their relevant footprint. LIDAR technology can address this challenge offering remote sensing of aerosols at long distances with up to several kilometres’ radius of detection. Aerosols concentration and ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The AirSentry II family of ion mobility spectrometers detect and alert users to small concentrations or changes in airborne levels of chlorides, acids, amines and ammoniacontaining species. With parts-per-trillion (ppt) sensitivity, these point-of-use sensors provide fast response, increased detection selectivity and repeatable performance. Combining Air Sentry II sensors with a central software ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Application specific design, compact fast-response thermometer designed for temperature measurements on plate and float glass applications. A unique miniature radiation thermometer measuring just 28mm x 4mm, JRG/A is specifically designed to monitor temperature consistency in plate and float glass ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The APDA-371 automatically measures and records airborne particulate concentration levels (in milligrams or micrograms per cubic meter), using the industry-proven principle of beta ray attenuation. Thousands of this Dust Analyzer units are currently deployed worldwide, making the unit one of the most successful air monitoring platforms in the ...
-
Manufactured by Norsonic ASbased in NORWAY
The Nor1210 outdoor microphone is a sophisticated, durable and well proven outdoor microphone for permanent installations. Several hundred units are installed worldwide on airports, at industrial sites and other places requiring permanent noise monitoring. Just a few minor design upgrades have been made to the Nor1210 since the first unit was installed in 1994. This shows that the Nor1210 is a ...
-
Manufactured by Droplet Measurement Technologies (DMT)based in USA
The first generation of micro pulse lidar technology was designed by NASA for detecting high cirrus clouds. Our subsequent commercial “Micro Pulse LiDAR” generations (MPL and MiniMPL) have evolved with the goal of making the most cost-effective, robust, and sensitive backscatter lidar possible. This has been achieved by using quality lasers, rigid optics, and a narrow field of view ...
-
Manufactured by Droplet Measurement Technologies (DMT)based in USA
MPL’s are deployed in some intense and challenging locations. The MPL Wide Field Receiver (MPL-WRF) and the MPL Iris (MPL-Iris) speed up deployment, reduce the need for outside intervention, and can extend the life of your ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you