Air Pollution Control Regulations Equipment For Air And Climate Available In Romania
-
Manufactured by Clean Gas Systems, Inc. (CGS)based in USA
CGS Cyclone Collectors are designed to achieve high dust collection efficiencies at low pressure drops. We can satisfy the most stringent air pollution control laws and/or product recovery requirements. Our Cyclones incorporate a volute or tangential inlet. Collection efficiency depends on many factors such as operating pressure drop, cyclone barrel diameter, number of gas turns, gas density, gas ...
-
Manufactured by Calgon Carbon Corporationbased in USA
VENTSORB canisters, each containing 180 pounds of activated carbon, are ideal for low-flow air purification applications at industrial and municipal facilities. These economical adsorption systems control small volume organic contaminants and/or odorous gas emissions from: Storage tank vents, Reactor vents, API separator vents, Sludge thickener tanks at waste treatment plants, Sewer gas vents, ...
-
Manufactured by Tanaka Electric Laboratory Co., Ltd.based in JAPAN
DDM-HAL2 is a dust monilor designed for stationary sources such as industrial boilers and incinerators, and shipboard boilers to monitor dusi in real time. Air pollution lias increased environmental and public health risks, and the government air pollution control law is gelling tougher. To comply with the law it is important to continuously manage the dust monitoring data along with the ...
-
Manufactured by Hexagon Composite Engineering Sdn Bhdbased in MALAYSIA
Our standard counter-current Packed Scrubbers (SPT series) have been pre-engineered to remove corrosive gases and liquid particulates from air streams containing either a single pollutant or a combination of pollutants. All standard scrubbers have been designed to achieve high collection efficiencies with maximum corrosion resistance and minimum maintenance. The standard scrubbers are ...
-
Manufactured by Clean Gas Systems, Inc. (CGS)based in USA
CGS Cyclone Collectors are designed to achieve high dust collection efficiencies at low pressure drops. We can satisfy the most stringent air pollution control laws and/or product recovery requirements. Our Cyclones incorporate a volute or tangential inlet. Collection efficiency depends on many factors such as operating pressure drop, cyclone barrel diameter, number of gas turns, gas density, gas ...
-
Manufactured by Clean Gas Systems, Inc. (CGS)based in USA
CGS Cyclone Collectors are designed to achieve high dust collection efficiencies at low pressure drops. We can satisfy the most stringent air pollution control laws and/or product recovery requirements. Our Cyclones incorporate a volute or tangential inlet. Collection efficiency depends on many factors such as operating pressure drop, cyclone barrel diameter, number of gas turns, gas density, gas ...
-
Manufactured by Tanaka Electric Laboratory Co., Ltd.based in JAPAN
Tanaka Electric Laboratory DDM-fC high performance real-time dust monitor system is designed for the harsh industrial environment such as high temperature (820 °C), high pressure (246 kPa), high humid , and highly electrically charged exhaust gas. It can measure dust density up to 1 mg/Nm3 as regulated by the Air Pollution Control Law. It is designed both for standalone and for unattended ...
-
Manufactured by CECO Environmentalbased in USA
Emtrol has supplied more tertiary cyclone systems for FCC units than any other cyclone supplier, and our experience in this area is unequaled. Many of these installations have been operating for more than 20 years and, at this juncture, we have secured over 700 contracts worldwide for the supply of cyclones for the specialized FCC ...
-
Manufactured by Elessent Clean Technologies Inc.based in USA
Achieving regulatory compliance for NOx, SOx and particulates emissions on a continuous basis has never been so ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you