Air Pollution Control Equipment For Air And Climate Available In Burkina Faso
-
PremiumManufactured by Testo, Inc.based in USA
Does a sizeable part of the work you do have something to do with refrigerant systems or heat pumps? Then here’s one tool you can’t afford to be without: the testo 550-2 digital manifold ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1015 Rosette® multibottle array, or with model AR1015 Acoustic Command Control. Inert gas can ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The 7200 Plus and 7400 Plus Controllers are designed to provide simultaneous display and alarm functions for up to four monitored variables. A graphic LCD displays monitored data as bar graphs and engineering units. Three adjustable alarm levels are provided per channel. Relay outputs allow control of beacons, horns and other alarm events. The controllers are easy to configure and user friendly. ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
The calibration system serves the mandatory zero and end point verification of gas analyzers, especially those in automated measuring networks. The zero and end points are verified with a signal from the measuring network computer; the calibration can also be activated with the keyboard at the front of the ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
DensiControl IN with connecting kit and 6 m long measuring hose. The F-gas regulation (EU) 517/2014 stipulates regular verification of density monitors installed in switchgear. In combination with a DILO lock valve it is possible to quickly check whether the density monitor switching points are triggered in time without disassembling the density monitor. Thus, the DensiControl IN allows very ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 7050 is a simplified gas mixer based on the principle of gas stream through mass flow controllers (MFC) and mainly used to calibrate and linearize Gas Monitors. Built according to the ISO 6145/7 normalization, the Sonimix 7050 is totally compatible with the US EPA methods and can be easily linked with National Standards (NIST, METAS, UKAS…). The Sonimix 7050 Multi range gas ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1015 Rosette multibottle array, or with model AR1015 Acoustic Command Control. Inert gas can be ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
LGT-100 is a flameproof in-situ type analyser capable of analysing O2, CO, NH3, CO2, CH4, H2O, HCl, HF and other gases in various and complex conditions. The LGT-100 laser gas analyser can be directly installed across stack, with the advantages of uncomplicated sampling, no pre-treatment system, simple construction and no moving parts. The analyser’s OLED screen benefits from low power ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1015 Rosette® multibottle array, or with model AR1015 Acoustic Command Control. Inert gas can ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 1403 is a reliable, easy-to-use multipoint sampler and doser. It combines with the Innova 1512 photoacoustic gas monitor and a controlling computer featuring the Innova 7650 basic ventilation software to offer numerous monitoring ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 5000 is state-of-the-art Continuous Emission Monitoring System, and is designed for a wide variety of stationary emission monitoring applications. The IMR 5000 is a stand-alone analysis system that works automatically. Available in a 19” rack mount or rugged wall mounted enclosure. The wall mount enclosure meets NEMA type 4X (IP65) standards. The modular approach of the IMR 5000 ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 certified by the TUV following EN 14662-3 for benzene monitoring. Standard measured compounds: Benzene, Toluene, Ethylbenzene, m+p-Xylene, o-Xylene, 1-3 Butadiene (up to 40 other compounds on ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The MINI SERIES C4 is perfectly suited for efficient gas handling of small gas compartments and gas recovery down to < 5 mbar. It is specially provided for the handling of gas mixtures (Alternative Insulating Gases). The handy individual MINI components for recovery, consisting of a compressor and a vacuum compressor, are connected to the unit via wire-braided ...
-
PremiumManufactured by BPC Instruments ABbased in SWEDEN
Gas Endeavour® is our premier automatic instrument for continuous monitoring of fermentation gas (i.e., hydrogen, methane, carbon dioxide) released in in-vitro ruminant digestive models and in-vitro monogastric hindgut digestive model for monogastric animals and human. In comparison with the other in-vitro methods measuring the transformation of fermentable substrate, the Gas Endeavour® ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The mixing unit has been specially developed for the handling of gas mixtures based on C4-FN and their specific requirements. A total of four gas components can be mixed. The gas mixture is circulated by the compressor to generate a homogenous mixture. Using the integrated compressor, the generated gas mixture can be filled directly into gas compartments or for transportation, stored into ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The MINI SERIES C4/C5 is perfectly suited for efficient gas handling of small gas compartments and gas recovery down to < 5 mbar. It is specially designed for the handling of gas mixtures based on 3M Novec 4710 or 3M Novec 5110. The working pressures allow gaseous storage in order to prevent demixing. Thus, filling of the gas mixture from the gas compartment into a transport cylinder as well ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
ESE230 compressed gas cooler is widely used inrapid dehydration and minimizes water-soluble components of gas lost, for online gas analysis instruments, providing a complete sample drying gas. It can work in ambient temperature of +5? to +50?. ...
-
PremiumManufactured by Cloud Tech Pvt. Ltd.based in INDIA
Cloudtech is one of the renowned Mist Gun and Anti Smog Gun Manufacturers & Suppliers. The world of big and large cities seems glamorous from outside but however the sight you have within might be so hazy and obscure that you can’t even see the horizon. This might be because of the smoke or the fog which is nonetheless called as ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
VPVision is the proven energy monitoring system for plant utilities. VPVision Mobile gives you all the options from VPVision, but in a sturdy Explorer Case. Making it withstand the most challenging industrial conditions. It enables you to offer your customers a complete audit of plant utilities. But you can also show them the benefits of permanent ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The ECVI (Electronic Control Valve Interface) by Continental Controls Corporation is a state-of-the-art electronic valve control system designed to precisely control gas and liquid flow in engines and other industrial applications. It is compatible with a wide range of valve types and sizes, and can be easily integrated with existing engine control systems. The ECVI features advanced digital ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you