Air Pollution Control Equipment For Air And Climate Available In Kosovo
-
ShowcaseManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Our flagship model is the i8-1000 line. It took over three years to develop and is at the forefront combustion technology, offering impressive burn rates and large batch sizes while still achieving some of the lowest emissions in its class. The i8-1000 can be customised with external cladding and automatic loading/de-ash to provide an effective and sustainable waste disposal solution for many ...
-
ShowcaseManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The handy Mini Series consists of the following individual components which can be assembled as complete ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Widely considered to be the most energy-efficient oxidizer, Anguil's Regenerative Thermal Oxidizer (RTO) uses ceramic media to recover upwards of 97% of the available energy. What makes our RTO so popular is its ability to repurpose the thermal energy generated during operation to reduce operating costs and energy consumption of the system itself. The regenerative component makes it capable of ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
When catalyst is added to the media chambers of an RTO it is then referred to as an RCO. The abatement device still relies on high energy recovery to minimize auxiliary energy usage. However, the VOC compounds will oxidize at lower temperatures with the use of catalyst, further lowering the need for auxiliary energy. This is a great option for catalyst friendly compounds. Multiple catalyst and ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
The safe way to handle organic solvents with the Mini Spray Dryer S-300. The safe way to spray dry organic solvents is to use the Inert Loop S-395 as the ideal accessory for your Mini Spray Dryer S-300. Its innovative design makes spray drying of organic solvents more environmentally friendly, cost-efficient and ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Application description:Collection on filter plates for the subsequent laboratory analysis (heavy metals) in samples. Control module MicroPNS as 19" rack model with switch for 8 filters. Collection system is mounted in a measuring ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Microcomputer controlled gas collector for the automated dust sampling on membrane filters with a diameter of 140 mm or 150 mm ac. to EN ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Ambient air quality is critical for our health and the environment. MARGA is a fully autonomous sampling and measurement system that continuously measures the water-soluble gas and aerosol components that have a direct effect on air quality. These results can then be used to study the formation of aerosols from their precursor gases and how their concentration and composition vary with ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Universally applicable gas-tight booster solution with magentic coupling for oilfree conveying. Low-maintenance sealing concept, the separation between oil and process side is achieved by a special piston ring seal Design pressure of 7.0 bar (g) acc. to AD2000 / DIN EN 13445. 16 ...
-
PremiumManufactured by BPC Instruments ABbased in SWEDEN
Effortless operation, maximum convenience. BPC Core is a self-contained, high precision gas volume and flow meter array designed for monitoring of up to 9 or 18 parallel gas streams. Its distinctive integrated data acquisition and processing systems enable it to operate autonomously, eliminating the need for a computer or any other external device. Yet, users can conveniently access real-time ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The MINI SERIES C4/C5 is perfectly suited for efficient gas handling of small gas compartments and gas recovery down to < 5 mbar. It is specially designed for the handling of gas mixtures based on 3M Novec 4710 or 3M Novec 5110. The working pressures allow gaseous storage in order to prevent demixing. Thus, filling of the gas mixture from the gas compartment into a transport cylinder as well ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1015 Rosette multibottle array, or with model AR1015 Acoustic Command Control. Inert gas can be ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics Continuous Emissions Monitoring Calibration Systems (CEMCS) have been used in CEM vans and laboratories for over twenty-five years. They meet or exceed the performance requirements of the United States EPA 40 CFR Part 51 Method 205 Appendix M. The accuracy and repeatability make them the unit of choice for source testers around the world. ...
-
PremiumManufactured by ENVEAbased in FRANCE
The In-Situ TDLS gas analyzer has been designed for meeting the requirements of a large range of CEMS and Process applications. LAS 5000XD uses Tunable Diode Laser Spectroscopy (TDLS) and comes in various models for measuring parameters such as NH3 + H2O, HF, CO + CO2, O2, HCl + H2O, ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The AV1-C1D2C audio-visual alarm station is designed for installation and use in heavy industrial environments. The alarm station consists of a warning light (2 lights for AV2) and a siren. The warning light can consist of any dome color such as amber, blue, clear, green, red, or ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Analyser for continuous on-line monitoring of Hydrogen ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1015 Rosette multibottle array, or with model AR1015 Acoustic Command Control. Inert gas can be ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
LGT-350 laser moisture analyzer is a high precise analyzer for gas measurement, developed based on tunable diode laser absorption spectroscopy. One-side mounting installation is much easier than cross-stack. By using a tunable semiconductor laser, LGT series laser gas analyzer scans the specific absorption lines of the measured gas(no background gas) to get the second harmonic of the gas. Through ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrosep A Supp 10 - 50/4.0 separation column is based on a high-capacity polystyrene-divinylbenzene copolymer with a particle size of only 4.6 µm. This proven column concept optimized by Metrohm is characterized by its robust construction, high selectivity and outstanding separating efficiencies. High plate numbers and the favorable position of the system peak between fluoride and ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The H2S/TOS TS MEDOR® is an industrial gas chromatograph for the analysis and monitoring of sulfur compounds in gas: H2S, Mercaptans, Sulfides and total ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you