gas cleaning Equipment available in South Korea

Available in South Korea| Near South Korea
54 Results found

We couldn't find any gas cleaning equipment in South Korea

Here is a list of results available in South Korea

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Air Pollution Control ×

  • Keyword: gas cleaning ×

  • Available in: Asia & Middle East ×

  • Available in: South Korea ×

CALVERT Collision - Gas Cleaning Scrubber

by Ion Exchange Waterleau Ltd.     based in Navi Mumbai, INDIA

Utilises a special collision process for maximizing the action of venturi throats. Ideally suited for all types of incinerator off-gas cleaning applications as well as for any other applications requiring high particulate matter collection efficiencies.

HOFGAS - Model Ready - Land Gas Collection System - Preparation Unit for Gas Utilisation

by Hofstetter BV     based in Schiphol-Rijk, NETHERLANDS

The HOFGAS-Ready is a complete extraction and gas flaring system for safe and economic degassing of landfill sites. The gas is collected continuously and prepared for further use. The installation can be equipped with a gas utilisation connection for the purpose of energy recovery.

contec - Dust Collector Filters for Air and Gas Filtration

by contec GmbH Industrieausrüstungen     based in Bad Honnef, GERMANY

Application: For higher levels of dust and dirt. On pressure side or in negative pressure systems.

CRS - Model GFC - Flow Controllers

by Chromatography Research Supplies Inc     based in Louisville, KENTUCKY (USA)

Model GFC mass flow controllers are designed to set and indicate flowrates of inert gases. Flowrates are set by a proportionating electromagnetic valve, and are unaffected by temperature and pressure variations within stated limitations. LCD screens are supplied with direct reading displays, and zero and span adjustments are conveniently ...

ERG - Air Pollution Control and Industrial Gas Treatment Systems

by ERG (Air Pollution Control) Ltd     based in Horsham, UNITED KINGDOM

ERG is a leader in the field of air pollution control through on our extensive knowledge and wealth of experience of the technology in this sector. Our tailor-made design solutions are optimised to give the best technical solution for the lowest capital and running cost, and our systems have been installed world-wide.

ERG - Air Pollution Control and Industrial Gas Treatment Systems

by ERG (Air Pollution Control) Ltd     based in Horsham, UNITED KINGDOM

ERG is a leader in the field of air pollution control through on our extensive knowledge and wealth of experience of the technology in this sector. Our tailor-made process designs are optimised to give the best air pollution solutions for the lowest capital and running cost, and our systems have been installed world-wide.

Enviropol - Model WESP - Wet Electrostatic Precipitators for Ultra Clean Gas

by Enviropol Engineers Pvt.Ltd.     based in NOIDA, INDIA

With increasing demand, world-wide, for reduction of respirable particulate and aerosols from various industrial process, WESP technology from Enviropol-Envibat is gaining recognition due to its ability to capture sub-micron particulate with condensed acid mist unlike other dry separation techniques like Filter & Dry ESP.

AKTEK - Model TP13100M - Dessicant Basket

by Aktek Technology Engineering Co. Ltd.     based in Kullar, TURKEY

The AKTEK Model TP13100M Air Dryer absorbs moisture from the air that is drawn into a storage tank during the unloading of product or by “thermal breathing” conditions. Desiccant of high absorptive capacity is used as the drying agent. The hard ball shaped form of the desiccant minimizes the pressure drop, permitting more efficiency. ...

IMR - Model 500 - Portable Flue-Gas Dryer

by IMR Environmental Equipment, Inc.     based in St. Petersburg, FLORIDA (USA)

Permeation dryer. Comes with heated hose, gas-sampling probe, filter, rugged case.

JohnCrane INOVIT - Gas Conditioning Units

by John Crane     based in Morton Grove, ILLINOIS (USA)

Dependent on the process and operating conditions, gas conditioning unit (GCU) modules can be added to the standard INOVIT™ brand gas seal system to provide an integrated system that will further protect the gas seals. Each system incorporates appropriate design modules to provide maximum compressor reliability and performance during normal ...

Aqua - Natural Gas Heaters

by Aether DBS     based in Tulsa, OKLAHOMA (USA)

The Aqua Gas NG design is based on a forced draft natural gas burner supplying energy to a water-glycol mixture through a series of multiple pass horizontal fire tubes to increase heat transfer efficiency.  The heated solution transfers the heat to the process coil to heat the natural gas. Control of the natural gas discharge temperature is ...

Model LG - Mixing Tubes

by Maxon Corporation - a Honeywell Company     based in Muncie, INDIANA (USA)

Series 'LG' Mixing Tubes provide thorough blending of the air/gas mixture for all MAXON premix industrial burner systems. Most clean, low pressure gases may be used. When combined with a combustion air blower and MAXON MICRO-RATIO flow control valve, the 'LG' Mixing Tube can offer localized mixing of pre-proportioned air and fuel to single or ...

Multi Ratio Mixers

by Maxon Corporation - a Honeywell Company     based in Muncie, INDIANA (USA)

Thorough blending of the air / gas mixture for all MAXON premix burner systems is provided in our Multi Ratio Mixing Tubes. Most clean, low pressure gases may be used in these mixers. These Mixing Tubes can offer localized mixing of pre-proportioned air and fuel to single or multiple industrial burner systems. A wide range of capacities provides ...

PREMIX - Blower Mixers

by Maxon Corporation- a Honeywell Company     based in Muncie, INDIANA (USA)

PREMIX Blower Mixers provide a convenient, flexible method of supply premixture for a variety of industrial burners. Air for combustion is drawn in through the ratio valve where it can be throttled. That same ratio valve includes a gas butterfly valve cross linked to the air valve. A multiple-screw cam design permits fuel flow to be matched to air ...

Model HG - Mixing Tubes

by Maxon Corporation - a Honeywell Company     based in Muncie, INDIANA (USA)

Using the kinetic energy of higher gas pressures, the Series 'HG' Mixing Tube provides a thoroughly blended air/gas mixture. The higher gas pressure allows use of a lower pressure combustion air blower. In combination with a MAXON MICRO-RATIO flow control valve and combustion air blower, the 'HG' Mixing Tube can provide localized mixing of air and ...

VENTITE - Inspirators

by Maxon Corporation- a Honeywell Company     based in Muncie, INDIANA (USA)

VENTITE Inspirators provide a low-cost means of supplying air/gas mixture to premix-type gas burners. Gaseous fuel under high pressure is introduced through a drilled spud orifice into the venturi throat, pulling in a proportional amount of combustion air. The air and gas are mixed and may be used to supply most premix-type industrial burner ...

Integrated Gas Conditioning

by Blue Electron     based in Manlius, NEW YORK (USA)

This product integrates biological desulphurization, active filter absorption and dehydration functions into one system to address complex gas cleaning requirements. Special applications include: Local and/or industrial sewage plant.

Dust Collection & Gas Scrubbers

by TEMA Process B.V.     based in Heerde, NETHERLANDS

TEMA Process B.V. offers Dust Collection & Gas Scrubbing equipment and systems for emission control, gas cleaning and product recovery.TEMA Process designs the Dust Collection & Gas Scrubbing equipment and systems in accordance to the latest standards, local conditions and product specifications.

Fuel Gas Conditioning Package

by Integrated Flow Solutions Inc     based in Tyler, TEXAS (USA)

Integrated Flow Solutions Fuel Gas Conditioning Systems are designed to protect natural gas fueled engines and turbines from liquid slugs, solids (< 0.1 microns) and liquid aerosols. Additionally, the fuel gas is superheated above the hydrocarbon and water dew points to prevent liquid condensation in the turbine’s combustion chambers. ...

Model FGCS – 100.0 - Fuel Gas Conditioning Package

by Integrated Flow Solutions Inc     based in Tyler, TEXAS (USA)

Integrated Flow Solutions Fuel Gas Conditioning Systems are designed to protect natural gas fueled engines and turbines from liquid slugs, solids (< 0.1 microns) and liquid aerosols. Additionally, the fuel gas is superheated above the hydrocarbon and water dew points to prevent liquid condensation in the turbine’s combustion chambers. ...

Need help finding the right suppliers?

Let the XPRTs do the work for you