We couldn't find any gas collection equipment suppliers or service providers located in Kansas
Here is a list of equipment results with suppliers serving Kansas
Gas Collection (Air Pollution Control) Equipment Available In Kansas
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
This bag is a simple and cost-effective system for collecting measuring gas in case it cannot be returned directly into the circuit breaker. Its handling is very easy: Connect the bag with the hose included in the scope of supply to the measuring device. The discharge gas collecting bag allows collecting the SF6 ...
-
Manufactured by Lemna Environmental Technologies, Inc. (LET)based in USA
, allowing no diffusion of odor vapors, and a piping system to draw off gas produced under the cover using negative pressure. An LET gas cover can be paired with a LemTec™ Modular Insulated Cover System for heat retention to maintain optimal digester performance or for additional protection of gas collection from ice, ...
-
Manufactured by Fabtech SA Pty Ltd.based in AUSTRALIA
Anaerobic systems incorporate the use of flexible membrane covers to collect methane gas. This methane gas is collected from around the perimeter via a perforated piping system and then processed in either flaring or co-generation. Specially designed weights and floats are attached to the cover membrane, which cause the ...
-
Manufactured by Vacumetrics Incbased in USA
Made of Neoprene for short-term gas collection. Diffusion is relatively low and gas may be stored up to one-half hour witout measureable changes in gas composition. The dead space is zero if they are wrung out. During test, dead space is limited to that of the attached valve. Part # 1197-25 neck fits tight over 22mm OD fitting. ...
-
Manufactured by Engineered Textile Products, Inc. (ETP)based in USA
Bio-Gas Collection Covers are Floating Covers for the collection of waste gases for controlling odors and preventing of escaping gases, some which can be collected for energy purposes and also to prevent greenhouse ...
-
Manufactured by Servinoxbased in FRANCE
Pressure, depression and gas collection safety valve for inerted tank. The BOG range of valves are equipment designed to protect low pressure tanks not subject to the DESP against depressions (vacuum breaker) and/or overpressures. Depending on the version, the valve’s exhaust can be collected. Servinox has the tools to size a valve ...
-
Manufactured by Wind Defender, LLCbased in USA
ADS AdvanEDGE panel pipe provides the dimensional stability and fi eld-proven structural strength for quick, effective subsurface drainage. It consists of a perforated panel-shaped plastic core wrapped with geotextile for soil fi ltration. The distinguishing performance feature of panel pipe is its ability to rapidly collect and remove ...
-
Manufactured by Gastec Corporationbased in JAPAN
The activated carbon tube is used in work environments where organic-solvent vapour is collected. Generally the activated carbon tube is suited for detection of almost all organic solvents of low polarity . 2 layers,Charging quantity : ...
-
Manufactured by ITK Envifront ABbased in SWEDEN
The PFMH-TFAC filter is specially designed to clean flue gas from cremation processes. It is built to be able to fit in small premises with a low ceiling height and little space. The fabric filter PFMH's task is to clean the flue gas from particles of dust and the bed filter TFAC is composed with active carbon to clean the air from ...
-
Manufactured by ITK Envifront ABbased in SWEDEN
The ITK Envifront TAS process is developed for cleaning of flue gasses through so called dry adsorption and is specially suited for crematories, small waste incineration plants or hazardous waste incineration plants. The system is dimensioned for plants with a size of 100-2000 kg/h, with a medium to high ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
are strengthened with alumina and are pre-fired at 900°C for 2 hours during manufacturing to stabilize the weight prior to use. The gas collection efficiency of the thimbles is 99.95% (0.3 micron DOP). The 25×90 mm thimbles are specially manufactured for stack sampling and tapered for easy loading. Cellulose thimbles are available upon ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
are strengthened with alumina and are pre-fired at 900°C for 2 hours during manufacturing to stabilize the weight prior to use. The gas collection efficiency of the thimbles is 99.95% (0.3 micron DOP). The 25×90 mm thimbles are specially manufactured for stack sampling and tapered for easy loading. Cellulose thimbles are available upon ...
-
PremiumManufactured by AMS, Inc.based in USA
Fluoropolymer Tubing and Polythylene Tubing are used with AMS Retract-A-Tip, the AMS dedicated tip, AMS Gas Vapor Probe Kits, and vacuum pumps for collecting soil gas ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q's CMP-Series air sampling systems allow for continuous duty/constant flow rate air samples at operator pre-set flow rates. These continuous duty, constant flow, self contained air sampling systems are commonly used as the primary air mover for gas/particulate collection and/or real time air monitoring. Two face mounted vacuum gauges ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Sorbent trapsprovide total mercury measurement as well as speciated mercury measurement (oxidized and elemental mercury phases). The flue gas sample is collected using a heated sample probe and calibrated pumping system. Mercury is captured by adsorption in sorbent traps media. The material in these traps is later analyzed using Zeeman ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The GFA-2590K in-stack thimble holder kit includes a selection of the seven most commonly used nozzle inserts, ranging from 1/8-inch to 1/2-inch, and one housing. The entire kit is conveniently packaged in a foam-lined carrying case for protection. The thimble holder connects directly to the end of the probe with a 5/8-inch tube union. One metal taper clip is included in the ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Glass fiber filters are: Dense, Highly resistant to chemical attach, biologically inert, Easily sterilized: Can be baked or autoclaved, Store indefinitely: Unaffected by ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Applications / Characteristics: Increased chemical resistance used to monitor airborne particulates. Does not adsorb acid ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
are strengthened with alumina and are pre-fired at 900°C for 2 hours during manufacturing to stabilize the weight prior to use. The gas collection efficiency of the thimbles is 99.95% (0.3 micron DOP). The 25×90 mm thimbles are specially manufactured for stack sampling and tapered for easy loading. Cellulose thimbles are available upon ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Glass fiber filters are perhaps the most highly engineered fibrous filtration media available for research and industrial applications. Glass microfibers, the starting raw material, are entirely man-made. Since the ultimate retention characteristics of the filter paper are determined by the microfibre diameter, rigid manufacturing controls are imposed to produce consistent, controlled diameter ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you