Gas Conditioning (Air Pollution Control) Equipment Available In Micronesia
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1306 Water Filtration System is an inexpensive, convenient source of deionized, mercury free water for the Series 3300 Mercury CEM. With two stages of pre-filtration eliminating particulate and organic contamination, the final stage R/O membrane and ion-exchange filters have extremely long ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 400 is a wall-mounted flue-gas dryer, and is designed to prepare flue-gases for a wide variety of gas monitoring applications. The IMR 400 is a 'stand-alone' system that works automatically. The ruseed wall mounted enclosure meets NEMAtype 4 (IP65) classification. The first step of the flue-gas conditioning process is ...
-
Manufactured by John Crane Corporatebased in USA
Dependent on the process and operating conditions, gas conditioning unit (GCU) modules can be added to the standard John Crane gas seal system to provide an integrated system that will further protect the gas seals. Each system incorporates appropriate design modules to provide maximum compressor reliability and ...
-
Manufactured by Clair Engineers Pvt. Ltdbased in INDIA
CLAIR has substantial experience in design, manufacture and supply of Gas Cooling Systems for cooling of dust laden process ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For extractive gas analysis. For emission and process monitoring. Continuous sample gas conditioning of humid process gases. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...
-
Manufactured by Envirocare International, Inc.based in USA
Evaporative Gas Conditioning (EGC) is a technique for conditioning flue gas prior to electrostatic precipitators or fabric filters to reduce gas volume, lower the temperature, and improve particulate collection. Finely atomized water is evaporated in the gas stream to lower its temperature and ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For extractive gas analysis. For emission and process monitoring. Continuous sample gas conditioning of humid process gases. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For mobile or stationary extractive gas analysis. For emission and process monitoring. Continuous sample gas conditioning of humid process gases. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...
-
Manufactured by Silica Verfahrenstechnik GmbHbased in GERMANY
In the field of natural gas conditioning Silica offers adsorption plants for drying and simultaneous reduction of the hydrocarbon dew point. We have been building adsorption plants for more than 80 years, letting our customers profit from our extensive ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
The portable system is suitable for variable, discontinuous and continuous operation. The components built into the system can be used for standard applications. For special requirements please ask us for other solutions. The heated sample line is to be mounted at the gas measuring inlet terminal inside the portable case. ...
-
Manufactured by Redecam Group SpAbased in ITALY
Gas conditioning towers (GCT) are used in industrial applications to cool gases upstream, ahead of bag filters, electrostatic precipitators or our Dual-Action Filters. They are considered to be the most effective type of cooling systems in treating exhaust process gases. Our GCTs offer unequalled effectiveness: our team has three ...
-
Manufactured by Wuhan Tianyu Intelligent Control Technology Co., Ltd.based in CHINA
Sampling gas usually contain impurities such as dust, liquid water and tar, some of these impurities could pollute the gas sensor if sampling gas was not pre-treated before entering into the analyzer. It could shorten lifetime of the instrument, even breakdown the instrument. And thus, it’s important to use gas ...
-
Manufactured by Cobey Incbased in USA
A Gas Conditioning Skid is designed to pre-treat natural gas and other combustible gasses prior to injecting into a critical process or a Gas Turbine Generator. The skid performs two functions; remove all liquid droplets and solid contaminants from the gas, and adjust the gas temperature to the ...
-
Manufactured by Gasco Pty Ltd.based in AUSTRALIA
Gasco designs, fabricates, commissions and services an extensive range of Process Skids for Gas Conditioning and Oil Treatment ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
The Ankersmid digital gas conditioning system is a compact, • low-maintenance, self-monitoring and completely equipped units is suitable for variable and continuous operation in most ...
-
Manufactured by Wahlco, Inc.based in USA
Flue Gas Conditioning is WAHLCO’s traditional core business and the product line which formed the basis of the company’s founding. FGC systems allow coal fired boilers to burn a wider variety of coals, including lower cost high ash coals and low sulfur coals which avoid the cost of scrubber installations, without ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For mobile or stationary extractive gas analysis. For emission and process monitoring. Continuous sample gas conditioning of humid process gases. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For extractive gas analysis. For emission and process monitoring. Continuous sample gas conditioning of humid process gases. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
The stationary system is suitable for variable, discontinuous and continuous operation. The components built into the system can be used for standard applications. For special requirements please ask us for other ...
-
Manufactured by Envirabased in SPAIN
The probe ASP 320 has been designed for the continuous sampling of gas in denitrification processes (DeNOx) where ammonium compounds (NH3) are added to reduce the content of nitrogen ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you