gas controller Equipment in Texas

49 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Air Pollution Control ×

  • Keyword: gas controller ×

  • In: USA ×

  • In: Texas ×

Model PT500 - Multi-Channel Gas Controller

by Pem-Tech, Inc.     based in Sugar Land, TEXAS (USA)

Model PT500 is a microprocessor-based multi-channel controller that provides up to 4 channels of continuous gas detection. The controller is housed in a Nema 4X weatherproof enclosure. PT500 can be interfaced with any of Pem-Tech’s toxic and combustible gas sensors. The controller provides a front panel user interface with alarm LED ...

Model 4200-LC - Automatic Gas Feed Controller

by JCS Industries, Inc.     based in Spring, TEXAS (USA)

The JCS Industries Model 4200-LC Automatic Gas Feed Controller feeds gaseous chemicals commonly used for water and wastewater disinfection accurately, reliably and safely. The system is comprised of a vacuum injector to safely introduce the gas into the feed-water stream, a reversing servo motor coupled with a V-notch valve to regulate the ...

Model MX 32 - Toxic and Flammable Gas Detection Controller

by Oldham Gas     Office in The Woodlands,, TEXAS (USA)

Introducing the MX 32 measurement and alarm unit suitable to protect equipment and personnel in atmospheres that may contain flammable and toxic gases. Available with one or two channels, the MX 32 offers tailor-made detection capabilities and exceptional programming possibilities compatible with a wide range of fixed gas detectors. The total cost ...

Model SO2, SO3, HF, HCI - Dry Acid Gas Scrubbing Control System

by PPC Air Pollution Control Systems     based in Longview, TEXAS (USA)

Up to 85% Control of SO2 . Up to 95% control of SO3, HCL & HF. Easily installs ahead of existing particulate controls (e.g. dry electrostatic precipitator or baghouse). Minimal footprint. Lower installed capital cost than limestone slurry scrubber or spray dryer. Possible to use existing duct work with minimal modifications. No water discharge ...

Model UPES - Multi-Channel Controller

by ESP Safety, Inc.     based in Houston, TEXAS (USA)

ESP Safety’s UPES Multi-Channel Controller offers maximum flexibility to users as a standalone, independent control system that can also be interfaced to a PLC or DCS system. This advanced microprocessor-based monitoring system is compatible with all flame-detection and gas-sensor products offered by ESP Safety. Utilizing the analog outputs, ...

Model ZN002A - Three Zone Control Module

by General Monitors     Office in Houston, TEXAS (USA)

The ZN002A is a Zone Control Module for the Zero Two Series Fire and Gas Detection System. The ZN002A provides zoning and voting functions for three separate and independent zones of gas and / or flame detection.

Flue Gas Recirculation Systems

by Epcon Industrial Systems, LP     based in The Woodlands, TEXAS (USA)

Flue Gas Recirculation (FGR) acts to reduce NOx formation by reducing peak flames temperatures. In conventional applications, the recirculated flue gas is typically extracted from the boiler outlet duct upstream of the air heater. The flue gas is then returned through a separate duct and hot gas fan to the combustion air duct that feeds the wind ...

Solid Gas Separation Systems

by Epcon Industrial Systems, LP     based in The Woodlands, TEXAS (USA)

Principle:  Combination of tangential, centrifugal and gravitational forces resulting in far more effective and superior separation.  Gases or Vapors From Solids  Far more efficient separation of carbon black, silica, coal fines, polymers, specialty and fine chemicals, other difficult solids, etc.

AEREON - Marine Recovery Unit

by AEREON     based in Austin, TEXAS (USA)

Since 1999, AEREON’s Jordan Technologies has applied our Vapor Recovery System to marine loading operations for both domestic and foreign markets. In order to comply with all of the United States Coast Guards’ (USCG) rules and regulations, a vast knowledge of marine loading applications is needed to safely design a carbon based Vapor ...

AEREON - Mechanical Vapor Recovery Unit (MeVRU)

by AEREON     based in Austin, TEXAS (USA)

AEREON’s mechanical vapor recovery unit (MeVRU) provides a reliable, low maintenance solution for condensate and liquid storage vapor recovery. The MeVRU is one of Jordan Technologies answers to capturing natural gas emissions from oil field stock tanks. The AEREON MeVRU is a customizable pre-engineered vapor recovery unit capable of moving ...

AEREON - Carbon Bed Recovery Unit

by AEREON     based in Austin, TEXAS (USA)

AEREON’s Jordan Technologies designs, manufactures and has actively serviced vapor recovery units (VRUs) since 1980. Jordan Technologies' units recover a variety of VOCs in truck, rail, marine and tank breathing applications, as well as crude, ethanol and natural gases. As the largest service company for VRUs in the world market, Jordan ...

Model 10C & 12B - Single Sensor Control Card Systems

by Detcon, Inc.     based in The Woodlands, TEXAS (USA)

Detcon Model Series 10 and 12 gas detection and alarm systems consist of single sensor control cards that can be integrated into one system design to create multi-function monitoring and control of a wide range of field devices. Field devices include gas detection sensors, flame and fire detection devices and process sensors. Each control card is ...

Model PT2008-SS - Multi-Channel Gas Monitor

by Pem-Tech, Inc.     based in Sugar Land, TEXAS (USA)

Pem-Tech's PT2008-SS Multi-Channel Gas Monitor is programmable for various combustible and toxic gases, pressure switches, and pressure transducers. Its large graphic display features an easy configuration using keypad switches on the front panel.

Model X40 - Integrated Alarm & Control Systems

by Detcon, Inc.     based in The Woodlands, TEXAS (USA)

Detcon Model X40 is a low power alarm and control system designed to monitor multiple gas detection sensors and/or a wide range of other field devices. The versatile control system is designed to receive and supervise inputs using either 4-20mA DC or Serial RS-485 Modbus™. Model X40 functions as a Modbus™ Master and can be customized ...

Pre-Pack Screen

by Delta Screens     based in Houston, TEXAS (USA)

Internal quality control of wrap wire specifications.Pre-packed screen cartridges are available in standard service 316LSS or CRA alloy as required. Excellent choice for marginal reservoirs requiring economical sand control options. The dual jacket design and packing process insures a void-free, concentric and uniform pack annulus.

Premium Diffusion Bonded Screen

by Delta Screens     based in Houston, TEXAS (USA)

The filtration media is diffusion bonded SS material made under the most stringent manufacturing controls (also available in CRA materials). The media pores have a fixed geometry resisting movement under pressure.A full range of micron ratings is available and the media may be customized to suit specific reservoir characteristics. The filtration ...

Model S4100T - H2S Addressable Transmitter

by General Monitors     Office in Houston, TEXAS (USA)

The S4100T Intelligent Sensor is a highly reliable, self-contained, microprocessor-controlled hydrogen sulphide transmitter with integral 3 digit readout. It is designed to measure and display concentrations of H2S in the 0-20 ppm, 0-50 ppm or 0-100 ppm range, but will continue to display concentrations up to 120% FSD. The sensing element may be ...

Pre-Pack Screens

by Alloy Screen Works     based in Houston, TEXAS (USA)

Our Pre-Pack screens provide sand control in applications where gravel packing is not feasible. These screens incorporate two all-welded screen jackets attached to a perforated base pipe. The annulus between the two jackets is filled with a filter medium sized to specific well conditions. Various filter media are available including resin coated ...

Elgin - Model ESS-1450HD2 - Barite Recovery & Dewatering Centrifuge

by Elgin Separation Solutions - Elgin Equipment Group (EEG)     based in Stafford, TEXAS (USA)

Elgin’s field proven decanter centrifuges are a perfect choice for maximizing barite recovery or drilling fluid dewatering in a 'zero-discharge' closed-loop environment.  With over 550 centrifuges installed worldwide, Elgin’s ESS-1450HD2 Decanter Centrifuge is an effective, dependable, reliable solution.  

Need help finding the right suppliers?

Let the XPRTs do the work for you