We couldn't find any gas turbine equipment suppliers or service providers located in Mali

Here is a list of equipment results with suppliers serving Mali

gas turbine Equipment available in Mali

  • MPSA - Model M501F/M701F Series - Gas Turbines

    With more than 171 units installed and being commissioned, and over 5.5 million hours of collective operation in the field (Oct. 2007), Mitsubishi’s F Series turbines are among the world’s most proven gas turbine designs. Progressive design updates and enhancements have helped to keep the Mitsubishi F Series at the top of its class for ...

    By Mitsubishi Hitachi Power Systems, Ltd. (MHPS) based in Lake Mary, FLORIDA (USA). from Gas Turbines Product line

  • Gas Turbine Exhaust Systems

    Clyde Bergemann gas turbine exhaust systems and components provide a “Balance of Plant” Island solution (exclusive of the turbine and HRSG-boiler).   Trusted Bachmann® equipment is the critical link between the gas turbine exhaust flange on the one side and the HRSG inlet connection on the other side.   Our exhaust ...

  • IAC Acoustics - Gas Turbine - Acoustic Enclosures

    The enclosure for a gas turbine installation used for power generation serves a number of different purposes including weather protection, turbine cooling, fire protection and an effective acoustic barrier. IAC Acoustics has extensive experience built up over a number of years in providing the best possible acoustic enclosures for a wide variety ...

    By IAC Acoustics based in Winchester, UNITED KINGDOM. from Power and Energy Product line

  • Pulse-Cleaned Air Filtration Systems

    Pneumafil offers two types of self-cleaning pulse filter systems for gas turbine inlets: up-draft ('Pneuma-Pulse') and cross flow.

    By Nederman Pneumafil LLC, a Nederman company based in Charlotte, NORTH CAROLINA (USA). from Gas Turbine Inlet Air Filtration Product line

  • BORSIG - Fuel Gas Conditioning Unit

    Fuel gas taken from the sources available at site and in particular in remote production locations often does not meet the high quality standards required for pipeline injection or for utilisation in modern high efficiency gas turbines or engines. The BORSIG Fuel Gas Conditioning Technology provides a non-sophisticated, cost effective and highly ...

    By BORSIG Membrane Technology GmbH based in Gladbeck, GERMANY. from Membrane Units for Gas Separation Product line

  • Model 8641 Series - Integrated Natural Gas Fuel Control Valves

    The Young & Franklin 8641 Series Integrated Gas Control Valve Assembly is a balanced double-poppet flow control valve.  This stainless steel bodied valve features a Fail-in-Place, NACE IV compliant design.  With a known Cv curve, the 8641 can be operated via closed-loop positioning by any modern turbine controller. When coupled to ...

    By Young & Franklin Inc based in Liverpool, NEW YORK (USA). from Electrically Actuated Gas Control Valves Product line

  • Model 3010 Series - EMA Choked Flow Gas Control Valves

    Young & Franklin 3010 Series Choked flow valves are electromechanically actuated (EMA), single seat precision fuel control valves.  These sonic flow valves are available in a range of sizes suitable for industrial or power turbines of any size. The Y&F 3010 EMA gas control valve (GCV) is a modern, high precision control valve with ...

    By Young & Franklin Inc based in Liverpool, NEW YORK (USA). from Electrically Actuated Gas Control Valves Product line

  • Model 3010 Series - EMA Unchoked Flow Gas Control Valves

    Young & Franklin 3010 Series Unchoked flow valves are electromechanically actuated (EMA), single seat precision fuel control valves designed for aeroderivative applications. The Y&F 3010 EMA gas control vale (GCV) is a modern, high precision control valve with excellent speed and valve position accuracy at low openings. This GCV ...

    By Young & Franklin Inc based in Liverpool, NEW YORK (USA). from Electrically Actuated Gas Control Valves Product line

  • Fuel Gas Conditioning Package

    Integrated Flow Solutions Fuel Gas Conditioning Systems are designed to protect natural gas fueled engines and turbines from liquid slugs, solids (< 0.1 microns) and liquid aerosols. Additionally, the fuel gas is superheated above the hydrocarbon and water dew points to prevent liquid condensation in the turbine’s combustion chambers. ...

    By Integrated Flow Solutions Inc based in Tyler, TEXAS (USA). from Power Generation Product line

  • Model FGCS – 100.0 - Fuel Gas Conditioning Package

    Integrated Flow Solutions Fuel Gas Conditioning Systems are designed to protect natural gas fueled engines and turbines from liquid slugs, solids (< 0.1 microns) and liquid aerosols. Additionally, the fuel gas is superheated above the hydrocarbon and water dew points to prevent liquid condensation in the turbine’s combustion chambers. ...

    By Integrated Flow Solutions Inc based in Tyler, TEXAS (USA). from Power Generation Product line

  • Cobey - Gas Conditioning Skids

    A Gas Conditioning Skid is designed to pre-treat natural gas and other combustible gasses prior to injecting into a critical process or a Gas Turbine Generator. The skid performs two functions; remove all liquid droplets and solid contaminants from the gas, and adjust the gas temperature to the injection requirements. Different styles of filter ...

    By Cobey Inc based in Buffalo, NEW YORK (USA).

  • Digester / WWTP Bio Gas Recovery

    Millions of gallons of sewer water is returned to Waste Water Treatment Plants (WWTP) for cleaning. The sewer water comes from households as well as commercial & industrial facilities.

    By Pioneer Air Systems based in Wartburg, TENNESSEE (USA). from Green Energy Product line

  • HRSGs - Heat Recovery Steam Generators

    The industrial market for Heat Recovery Steam Generators is served through the department NEM-MHS. Within this department, a new product philosophy was launched; a modular HRSG design for gas turbines in the range from 20 up to 75 MWe.

    By NEM HRSGs based in Leiden, NETHERLANDS. from Heat Recovery Steam Generators (HRSGs) Product line

  • Waste - Unused Energy Utilization System

    Electrical Power Generation - Hybrid Spiral Cycles. With the application of UTC’s Hybrid Spiral Cycles, low, medium and high level heat is converted into electrical power to achieve the maximum thermal, mechanical and electrical efficiencies to minimize the capital, operational and maintenance costs and deliver higher margins.  These ...

    By Epcon Industrial Systems, LP based in The Woodlands, TEXAS (USA). from Air Pollution Control Systems Product line

  • Emtrol - Third Stage Separators

    Emtrol has supplied more tertiary cyclone systems for FCC units than any other cyclone supplier, and our experience in this area is unequaled.  Many of these installations have been operating for more than 20 years and, at this juncture, we have secured over 700 contracts worldwide for the supply of cyclones for the specialized FCC ...

    By Emtrol LLC - a CECO Environmental Company based in Islandia, NEW YORK (USA).

  • Multiple Effect Evaporation Plant

    If raw brine as feed and low pressure steam for heating is available, the Multi-Stage Vacuum system is preferred. Purity levels can be set by the application of the adequate elutriation and purge systems.

    By EVATHERM Ltd. based in Mägenwil, SWITZERLAND. from Main Processes Product line

  • INCONEL - Model 601 - High Performance Alloys

    INCONEL nickel-chromium-iron alloy 601 (UNS N06601/W.Nr. 2.4851) is a general-purpose engineering material for applications that require resistance to heat and corrosion. An outstanding characteristic of INCONEL alloy 601 is its resistance to hightemperatureoxidation. The alloy also has good resistance to aqueous corrosion, has high mechanical ...

    By Special Metals Corporation based in New Hartford,, NEW YORK (USA). from Inconel- High Performance Alloys Product line

  • Aqueous - Ammonia Systems

    Aqueous Ammonia is a safer ammonia reagent for SCR applications than anhydrous ammonia; however it is more expensive on a delivered basis due to the large amount of water transported.   Additionally in the case of 19% aqueous ammonia, there will be approximately five times as many deliveries as anhydrous ammonia. Operating costs are also ...

    By Wahlco, Inc. based in Santa Ana, CALIFORNIA (USA).

  • Allied - Gasification Unit

    Gasification is a century old technology, which flourished quite well before and during the second world war.  Gasification can be broadly defined as the thermochemical conversion of a usually solid or liquid carbon-based material into a combustible gaseous product. The technology disappeared soon after the second world war, when liquid fuel ...

    By Allied Environmental Technologies, Inc. based in Seal Beach, CALIFORNIA (USA).

  • Allied - Multi-Stage Collector

    Allied Environmental Technologies, Inc. has a dedicated research and development group working within its key areas of expertise. R&D efforts aimed at finding practical solutions to air pollution, mass and heat transfer, fluid dynamics, processes in single and multi-phase fluid flows, and applied energy systems. Available control methods are ...

    By Allied Environmental Technologies, Inc. based in Seal Beach, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you