gas turbine Equipment available in Nevada

Available in Nevada| Near Nevada
17 Results found

We couldn't find any gas turbine equipment in Nevada

Here is a list of results available in Nevada

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Air Pollution Control ×

  • Keyword: gas turbine ×

  • Available in: USA ×

  • Available in: Nevada ×

MPSA - Model M501F/M701F Series - Gas Turbines

by Mitsubishi Power Systems Americas, Inc. (MPSA)     based in Lake Mary, FLORIDA (USA)

With more than 171 units installed and being commissioned, and over 5.5 million hours of collective operation in the field (Oct. 2007), Mitsubishi’s F Series turbines are among the world’s most proven gas turbine designs. Progressive design updates and enhancements have helped to keep the Mitsubishi F Series at the top of its class for ...

Gas Turbine Exhaust Systems

by Clyde Bergemann Power Group     based in Wesel, GERMANY

Clyde Bergemann gas turbine exhaust systems and components provide a “Balance of Plant” Island solution (exclusive of the turbine and HRSG-boiler).   Trusted Bachmann® equipment is the critical link between the gas turbine exhaust flange on the one side and the HRSG inlet connection on the other side.   Our exhaust ...

CCC - Model ALV 10 - Liquid Fuel Control Valve

by Continental Controls Corporation     based in San Diego, CALIFORNIA (USA)

The ALV 10 Liquid fuel metering valve is designed for Gas Turbines between 250Kw and approximately 35MW. It is the ideal compliment to either the AGV 10 or AGV 50 gas valves to create a state of the art, fast, switch on the fly, dual fuel system. The valve is fail safe closed so electronic failure, loss of power, or mechanical failures will all ...

BORSIG - Fuel Gas Conditioning Unit

by BORSIG Membrane Technology GmbH     based in Gladbeck, GERMANY

Fuel gas taken from the sources available at site and in particular in remote production locations often does not meet the high quality standards required for pipeline injection or for utilisation in modern high efficiency gas turbines or engines. The BORSIG Fuel Gas Conditioning Technology provides a non-sophisticated, cost effective and highly ...

Model 8641 Series - Integrated Natural Gas Fuel Control Valves

by Young & Franklin Inc     based in Liverpool, NEW YORK (USA)

The Young & Franklin 8641 Series Integrated Gas Control Valve Assembly is a balanced double-poppet flow control valve.  This stainless steel bodied valve features a Fail-in-Place, NACE IV compliant design.  With a known Cv curve, the 8641 can be operated via closed-loop positioning by any modern turbine controller. When coupled to ...

Model 3010 Series - EMA Unchoked Flow Gas Control Valves

by Young & Franklin Inc     based in Liverpool, NEW YORK (USA)

Young & Franklin 3010 Series Unchoked flow valves are electromechanically actuated (EMA), single seat precision fuel control valves designed for aeroderivative applications. The Y&F 3010 EMA gas control vale (GCV) is a modern, high precision control valve with excellent speed and valve position accuracy at low openings. This GCV ...

Model 3010 Series - EMA Choked Flow Gas Control Valves

by Young & Franklin Inc     based in Liverpool, NEW YORK (USA)

Young & Franklin 3010 Series Choked flow valves are electromechanically actuated (EMA), single seat precision fuel control valves.  These sonic flow valves are available in a range of sizes suitable for industrial or power turbines of any size. The Y&F 3010 EMA gas control valve (GCV) is a modern, high precision control valve with ...

Fuel Gas Conditioning Package

by Integrated Flow Solutions Inc     based in Tyler, TEXAS (USA)

Integrated Flow Solutions Fuel Gas Conditioning Systems are designed to protect natural gas fueled engines and turbines from liquid slugs, solids (< 0.1 microns) and liquid aerosols. Additionally, the fuel gas is superheated above the hydrocarbon and water dew points to prevent liquid condensation in the turbine’s combustion chambers. ...

Model FGCS – 100.0 - Fuel Gas Conditioning Package

by Integrated Flow Solutions Inc     based in Tyler, TEXAS (USA)

Integrated Flow Solutions Fuel Gas Conditioning Systems are designed to protect natural gas fueled engines and turbines from liquid slugs, solids (< 0.1 microns) and liquid aerosols. Additionally, the fuel gas is superheated above the hydrocarbon and water dew points to prevent liquid condensation in the turbine’s combustion chambers. ...

Cobey - Gas Conditioning Skids

by Cobey Inc     based in Buffalo, NEW YORK (USA)

A Gas Conditioning Skid is designed to pre-treat natural gas and other combustible gasses prior to injecting into a critical process or a Gas Turbine Generator. The skid performs two functions; remove all liquid droplets and solid contaminants from the gas, and adjust the gas temperature to the injection requirements. Different styles of filter ...

Digester / WWTP Bio Gas Recovery

by Pioneer Air Systems     based in Wartburg, TENNESSEE (USA)

Millions of gallons of sewer water is returned to Waste Water Treatment Plants (WWTP) for cleaning. The sewer water comes from households as well as commercial & industrial facilities.

HRSGs - Heat Recovery Steam Generators

by NEM HRSGs     based in Leiden, NETHERLANDS

The industrial market for Heat Recovery Steam Generators is served through the department NEM-MHS. Within this department, a new product philosophy was launched; a modular HRSG design for gas turbines in the range from 20 up to 75 MWe.

Woodward - Model 2301D - Load Sharing and Speed Control Systems

by Woodward, Inc.     based in Fort Collins, COLORADO (USA)

Woodward’s 2301D speed controls are used in electric generator systems where load sharing is desired. They are used with diesel or gas engines, or steam or gas turbines, and are compatible with all Woodward electronic controls. The microprocessor-based digital control is housed in a sheet-metal chassis and consists of a single printed ...

Waste - Unused Energy Utilization System

by Epcon Industrial Systems, LP     based in The Woodlands, TEXAS (USA)

Electrical Power Generation - Hybrid Spiral Cycles. With the application of UTC’s Hybrid Spiral Cycles, low, medium and high level heat is converted into electrical power to achieve the maximum thermal, mechanical and electrical efficiencies to minimize the capital, operational and maintenance costs and deliver higher margins.  These ...

Fired Heaters

by Hamon USA     based in Somerville, NEW JERSEY (USA)

For over forty years, Thermal Transfer Corporation has supplied fired heaters for a wide range of industrial applications. Each is custom-made for the specific conditions involved, taking into account process and material temperatures, flow distributions, corrosion potential, plant space constraints and, of course, the degree of efficiency and ...

Particulate Control

by APC Technologies, Inc.     based in Pittsburgh, PENNSYLVANIA (USA)

APC Technologies, Inc.'s Ultra High-Efficiency Filter (UHF®) systems use a special design for solid particulate control including smoke, haze, heavy metals, dust, and bacteria emissions with control efficiency of up to and in excess of 99% including sub-micron size particulate. Applications range down to particle sizes of less than 0.05 ...

Multiple Effect Evaporation Plant

by EVATHERM Ltd.     based in Mägenwil, SWITZERLAND

If raw brine as feed and low pressure steam for heating is available, the Multi-Stage Vacuum system is preferred. Purity levels can be set by the application of the adequate elutriation and purge systems.

Need help finding the right suppliers?

Let the XPRTs do the work for you