Air Pollution Control Equipment For Air And Climate In Latin America
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Ambient air quality is critical for our health and the environment. MARGA is a fully autonomous sampling and measurement system that continuously measures the water-soluble gas and aerosol components that have a direct effect on air quality. These results can then be used to study the formation of aerosols from their precursor gases and how their concentration and composition vary with ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Sorbent trapsprovide total mercury measurement as well as speciated mercury measurement (oxidized and elemental mercury phases). The flue gas sample is collected using a heated sample probe and calibrated pumping system. Mercury is captured by adsorption in sorbent traps media. The material in these traps is later analyzed using Zeeman mercury analyzer RA-915M and PYRO-915+ attachment. Traps are ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Starter series for medium-sized gas compartments The service carts of the Compact series for gaseous or liquid storage offer the best entry into professional gas handling. Equipped with the well-proven DILO components these service carts allow the recovery, filling and purification of SF6 gas as well as the evacuation of air and venting of medium-sized gas compartments. Depending on the device ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1015 Rosette multibottle array, or with model AR1015 Acoustic Command Control. Inert gas can be ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS offers compact analyser packages for monitoring NOX, SO2, CO and O2 in many different kinds of stack gas ...
-
PremiumManufactured by AMS, Inc.based in USA
Install as permanent sample point, or leave in ground as a disposable point. AMS dedicated gas vapor tips are used for detecting hydrocarbon spills, underground storage tank and pipe leaks, landfill contamination and hazardous waste sites. Soil gas monitoring with the AMS dedicated gas vapor tip is easily accomplished using an available AMS gas vapor probe ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1306 Water Filtration System is an inexpensive, convenient source of deionized, mercury free water for the Series 3300 Mercury CEM. With two stages of pre-filtration eliminating particulate and organic contamination, the final stage R/O membrane and ion-exchange filters have extremely long ...
-
PremiumManufactured by Myron L Companybased in USA
All Myron L handheld instruments are factory calibrated with NIST traceable Standard Solutions having specific conductivity/ppm values. MyronL Company Standard Solutions are made under strictly controlled conditions using reagent grade salts. These salts are mixed with deionized water having a resistivity of at least 5 megohms-cm ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The L170 service cart has been developed to recover, evacuate, fill, purify and vent large to extra large SF6 gas compartments with high process reliability. Thus, a gas compartment with 1,000l and 5 bar pa can be recovered down to 1 mbar in only 38 minutes*) when using the DN40 coupling**). Thanks to the state-of-the art control all functions run automatically and are displayed on a 10“ ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
The safe way to handle organic solvents with the Mini Spray Dryer S-300. The safe way to spray dry organic solvents is to use the Inert Loop S-395 as the ideal accessory for your Mini Spray Dryer S-300. Its innovative design makes spray drying of organic solvents more environmentally friendly, cost-efficient and ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
This model range has been specially developed for liquid storage and the emission-free recovery of gas mixtures down to a final vacuum of 1 mbar based on C4-FN and its specific requirements. The maximum storage pressure is 150 bar (pe). The recovered gas quantity can be determined accurately by means of the integrated digital scales. Modern control technology in conjunction with a user-friendly ...
-
PremiumManufactured by BPC Instruments ABbased in SWEDEN
Effortless operation, maximum convenience. BPC Core is a self-contained, high precision gas volume and flow meter array designed for monitoring of up to 9 or 18 parallel gas streams. Its distinctive integrated data acquisition and processing systems enable it to operate autonomously, eliminating the need for a computer or any other external device. Yet, users can conveniently access real-time ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
SF6 gas handling plant for an SF6 pressure turbulence channel with remote control for local operation. The plant serves for evacuation, gas recovery, and filling of a large volume wind ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1015 Rosette® multibottle array, or with model AR1015 Acoustic Command Control. Inert gas can ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Electronics Platform: Network enabled. Touch screen interface. Local data storage and front panel USB port. Remote access (troubleshooting, control and configuration). Improved data and instrument parameter logging. Additional functionality via optional s/w plugins (std. additions, remote valve control, and much ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The MINI SERIES C4/C5 is perfectly suited for efficient gas handling of small gas compartments and gas recovery down to < 5 mbar. It is specially designed for the handling of gas mixtures based on 3M Novec 4710 or 3M Novec 5110. The working pressures allow gaseous storage in order to prevent demixing. Thus, filling of the gas mixture from the gas compartment into a transport cylinder as well ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 2106 is a gas mixer mainly used to calibrate and linearize gas monitors and to generate specific gas mixtures. The Sonimix 2106 is based on the principle of gas flow through sonic nozzles and is built according the ISO 6145/6 standard. The sonic nozzle principle makes it the most accurate and stable device on the market. It generates binary mixtures from 0 to 100% in fixed steps in a ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Stand-alone unit as customised solution for handling large gas quantities. Special features/Process: Evacuation of air. Filling of the gas compartment. Recovery of gas. Venting the gas compartment. Separated air and gas circuit to avoid the contamination of the gas with ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The Mirror-Analyser SF6 uses the physical dew point mirror measuring principle which is characterised by its high precision and utmost reliability in order to measure the moisture content. By cooling the integrated mirror the moisture content of the gas is determined by measuring the temperature depending on the condensation or icing of the mirror. The other parameters of SF6 quality are ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you