Air Pollution Health Risk Equipment For Air And Climate Available In Wisconsin
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
Inhalable particle content is one of the most important indexes for measuring air quality. Combining years of experience in developing environment and safety monitoring instruments as well as the latest demand at home and abroad, our company has launched a new generation DPM-6000 pm 2.5 measurement device with high accuracy, reliability, stability and economy. Our PM monitor can measure PM10, ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The EPA Clean Air Act of 1987 established a measuring standard to evaluate and monitor the health effects of thoracic inhaleable particles. The standard was set that in order for an environment to be healthy, in terms of these particles, it must have a concentration of less than 150 mg/m3 of particles with aerodynamic diameters less than 10 microns (mm). The standard has been deemed PM-10, ...
-
Manufactured by Westech Scientific Instruments (Westech)based in UNITED KINGDOM
Westech 7 is the newest innovation in impactor sampling technology, suitable for dry powder inhaler testing, metered dose inhaler testing, nebulizer testing & nasal spray testing. The W7 is a Seven Stage Cascade Impactor with Micro-Orifice Collector conforming to all the critical dimensions defined for USP Apparatus 5 & 6 and EP Apparatus E. The W7 is a multi-jet impactor with 8 removable ...
-
Manufactured by Brechtelbased in USA
Most particles in the atmosphere take up water when exposed to increasing relative humidity – this often explains the poor visibility during the early morning hours when the relative humidity is high and particles have swollen in size and more effectively scatter solar radiation. When we inhale particles they also grow into water droplets, how large they grow determines where they deposit ...
-
Manufactured by Palas GmbHbased in GERMANY
MCERTS certified outdoor air quality monitor for smart city applications, fence line and indoor air quality ...
-
Manufactured by Turnkey Instruments Ltdbased in UNITED KINGDOM
DustMate is a hand-held instrument with a very fast response which has been designed to locate sources of workplace airborne dust and fumes even at very low concentrations. Highly effective for checking air quality within buildings. Its one second time resolution also allows it to be used as a road-side indicator to identify high pollution vehicles as they ...
-
Manufactured by Ionerbased in SPAIN
The PersonalDustMonit unit is an instrument for measuring and registering in continuation particles present in the air. Laser scattering is the method used by PersonalDustMonit for measuring the particles that make up the atmospheric particulate and class them based on their dimensions. Laser scattering allows immediate and continuous measurement of fine particles present in the air both with ...
-
Manufactured by Ionerbased in SPAIN
The P-DustMonit unit is an instrument for measuring and registering in continuation particles present in the air. Laser scattering is the method used by P-DustMonit for measuring the particles that make up the atmospheric particulate and class them based on their dimensions. Laser scattering allows immediate and continuous measurement of fine particles present in the air both with respect to ...
-
Manufactured by Cubic Sensor and Instrument Co., Ltdbased in CHINA
AM1009 is an integrated air quality sensor module with function of particle concentration, VOC and NO2 concentration, temperature and relative humidity measurement. Particle concentration is measured by laser particle sensor which uses light scattering principle. It measures and calculates the suspended particle number exactly, and output particle mass concentration μg/m3 directly via ...
-
Manufactured by EHC Teknik ABbased in SWEDEN
We have developed diesel particulate filters (DPF) that can handle the conditions that mining vehicles are used in. Without these filters, diesel particulate matter can spread through underground mines. It pollutes the air and poses serious health risks. ...
-
Manufactured by Cubic Sensor and Instrument Co., Ltdbased in CHINA
PM2008M-M laser particle sensor module is based on laser scattering technology, ultra-thin (12mm) designed with all metal shielding. Detecting particle concentration size between 0.3μ-10μm in the air and real-time output PM1.0,PM2.5,PM10 in μg/m3 directly via mathematical algorithm and scientific ...
-
Manufactured by InsightAir Europebased in BULGARIA
InsightAir’s industrial air quality sensor measures temperature, relative humidity, CO2, VOC, PM2.5 including Suspended Particulate Matter (PM100). PM100 is related to the total inhalable fraction of particles (coarse dust) in the air, which is regulated by the authorities in European countries. The sensor is connected through a local WIFI network or via GPRS (sim-card with monthly ...
-
Manufactured by Cubic Sensor and Instrument Co., Ltdbased in CHINA
PM2008 laser particle sensor module is based on laser scattering technology, ultra-thin (12mm) designed with all metal shielding. Detecting particle concentration size between 0.3μ-10μm in the air and real-time output PM1.0,PM2.5,PM10 in μg/m3 directly via mathematical algorithm and scientific ...
-
Manufactured by Pegasor Oy (Ltd)based in FINLAND
The Pegasor G2 is a new and improved particle sensor designed for real-time particle concentration monitoring in industrial environments. First developed for regulatory PN-PTI testing, the G2 is now available for all industrial measuring and monitoring applications where reliability, accuracy and ease of use are required. The G2 is specifically designed for OEM applications and it comes with a ...
-
Manufactured by Pegasor Oy (Ltd)based in FINLAND
Pegasor AIRam is a standalone monitor for measuring ultrafine particles in ambient, outdoor air. The AIRam system is powered by the Pegasor G2 sensor that provides real-time, accurate information on particle number (PN), lung deposited surface area (LDSA), particle mass (PM) concentrations. The Pegasor AIRam meets the WHO recommendations (global air quality guidelines 2021) for ultrafine particle ...
-
Manufactured by Westech Scientific Instruments (Westech)based in UNITED KINGDOM
The Westech 7 (W7) is Westech’s version of the Next Generation Impactor (NGI), a Seven Stage Cascade Impactor with Micro-Orifice Collector conforming to all the critical dimensions defined for USP Apparatus 5 & 6 and EP Apparatus E. The W7 is a multi-jet impactor with 8 removable collection cups and a convenient single tray design with operating flowrates between 15 and 100 ...
-
Manufactured by Testo SE & Co. KGaAbased in GERMANY
The hand-held particle counter testo DiSCmini measures the number and average diameter of nanoparticles efficiently, based on the electrical charging of aerosols. For example, with the testo DiSCmini you can reliably monitor human exposure to diesel soot, welding fumes or industrial nanoparticles. With the handy testo DiSCmini, you can take your measurements ...
-
Manufactured by TSI Incorporatedbased in USA
The RESPICON™ Particle Sampler is a lightweight, compact device for measuring human exposure to airborne particle concentrations in the workplace. The RESPICON uses a single sampling head to model the human respiratory tract and simultaneously determine the three most critical particle fractions: inhalable, thoracic, and respirable. These three size fractions represent the size of particles that ...
-
Manufactured by Oxility BVbased in NETHERLANDS
Based on the proven Philips’ NanoTracer, the NanoTracer XP (eXtended Performance) is delivering more features in the same portable package: Integrated calculation of Lung-deposited-Surface-Area (LDSA). Faster measurement in “Advanced Mode” (10 seconds sampling time). Increased measurement range to included UFP between 10-300 nm (20-120 nm average diameter). Longer battery life, ...
-
Manufactured by TCR-Tecorabased in ITALY
MDI Metered Dose Inhalers; DPI Dry Powder Inhaler. Aerodynamic particle sizing. The design concept of the Andersen Cascade Impactor evolves from the following information: The human respiratory system tract is an aerodynamic classifying system for airborne particles. A sampling device can be used as a substitute for the respiratory tract as a collector of airborne particles, and as such, it shall ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you