Air Pollution Health Risk Equipment For Air And Climate Near Nova Scotia
-
Manufactured by TSI Incorporatedbased in USA
The RESPICONâ„¢ Particle Sampler is a lightweight, compact device for measuring human exposure to airborne particle concentrations in the workplace. The RESPICON uses a single sampling head to model the human respiratory tract and simultaneously determine the three most critical particle fractions: inhalable, thoracic, and respirable. These three size fractions represent the size of particles that ...
-
Manufactured by TSI Incorporatedbased in USA
The Model 3550 Nanoparticle Surface Area Monitor measures the human lung-deposited surface area of particles (reported as µm2/cm3) corresponding to tracheobronchial (TB) and alveolar (A) regions of the lung. The Model 3550 provides a simple and fast solution for measuring the surface area equivalent dose in the lung. The Model 3550 is an important instrument for research in the fields of ...
-
Manufactured by Testo SE & Co. KGaAbased in GERMANY
The hand-held particle counter testo DiSCmini measures the number and average diameter of nanoparticles efficiently, based on the electrical charging of aerosols. For example, with the testo DiSCmini you can reliably monitor human exposure to diesel soot, welding fumes or industrial nanoparticles. With the handy testo DiSCmini, you can take your measurements ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
The Zefon Inhalable Dust sampler is a reusable filter cassette with a sampling head designed to measure the worker's exposure to inhalable particulates and respirable dust. When sampling at the recommended flow rate of 2 LPM, it collects a particle size distribution that includes particles of 100 micron and smaller. This meets the definition set forth by ACGIH for inhalable particulate. The ...
-
Manufactured by Turnkey Instruments Ltdbased in UNITED KINGDOM
DustMate is a hand-held instrument with a very fast response which has been designed to locate sources of workplace airborne dust and fumes even at very low concentrations. Highly effective for checking air quality within buildings. Its one second time resolution also allows it to be used as a road-side indicator to identify high pollution vehicles as they ...
-
Manufactured by Tri-Mer Air Pollution Control Systemsbased in USA
Particulate emissions are tiny particles and droplets in the air that are made up of hundreds of different chemicals. Most are formed in the atmosphere as a result of chemical emissions from power plants, industries and automobiles. To reduce PM pollution, the EPA regulates inhalable particles smaller than 10 ...
-
Manufactured by Westech Scientific Instruments (Westech)based in UNITED KINGDOM
Westech 7 is the newest innovation in impactor sampling technology, suitable for dry powder inhaler testing, metered dose inhaler testing, nebulizer testing & nasal spray testing. The W7 is a Seven Stage Cascade Impactor with Micro-Orifice Collector conforming to all the critical dimensions defined for USP Apparatus 5 & 6 and EP Apparatus E. The W7 is a multi-jet impactor with 8 removable ...
-
Manufactured by Westech Scientific Instruments (Westech)based in UNITED KINGDOM
The Westech 7 (W7) is Westech’s version of the Next Generation Impactor (NGI), a Seven Stage Cascade Impactor with Micro-Orifice Collector conforming to all the critical dimensions defined for USP Apparatus 5 & 6 and EP Apparatus E. The W7 is a multi-jet impactor with 8 removable collection cups and a convenient single tray design with operating flowrates between 15 and 100 ...
-
Manufactured by Palas GmbHbased in GERMANY
MCERTS certified outdoor air quality monitor for smart city applications, fence line and indoor air quality ...
-
Manufactured by Naneos Particle Solutions Gmbhbased in SWITZERLAND
The naneos partector is the world's smallest nanoparticle detector. We have designed it to be as simple to use as possible. It is based on a novel non-contact electrical detection principle which needs nearly no maintenance. It measures the lung-deposited nanoparticle surface area, which has been identified by toxicologists as the most important physical particle metric when it comes to health ...
-
Manufactured by Naneos Particle Solutions Gmbhbased in SWITZERLAND
The naneos partector 2 is the world's smallest multimetric nanoparticle detector. The partector 2 uses dual non-contact detection stages to measure not only lung-deposited surface area like the standard partector, but also particle number concentration and average particle diameter. Additionally, ultrafine particle (UFP) surface and ultrafine particle mass concentrations are calculated and ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The EPA Clean Air Act of 1987 established a measuring standard to evaluate and monitor the health effects of thoracic inhaleable particles. The standard was set that in order for an environment to be healthy, in terms of these particles, it must have a concentration of less than 150 mg/m3 of particles with aerodynamic diameters less than 10 microns (mm). The standard has been deemed PM-10, ...
-
Manufactured by Dustraction Ltdbased in UNITED KINGDOM
Our DX2000 Sanding Bench is designed to control the light, airborne dust which is generated from hand sanding of wooden components. The bench consists of a sheet steel case covered in PVC non-slip perforated matting on which the component is held. The working area of the bench is 2000mm x 1100mm, with a working height of 900mm. Air is drawn downwards through the perforated surface, which ...
-
Manufactured by Pegasor Oy (Ltd)based in FINLAND
The Pegasor G2 is a new and improved particle sensor designed for real-time particle concentration monitoring in industrial environments. First developed for regulatory PN-PTI testing, the G2 is now available for all industrial measuring and monitoring applications where reliability, accuracy and ease of use are required. The G2 is specifically designed for OEM applications and it comes with a ...
-
Manufactured by Pegasor Oy (Ltd)based in FINLAND
Pegasor AIRam is a standalone monitor for measuring ultrafine particles in ambient, outdoor air. The AIRam system is powered by the Pegasor G2 sensor that provides real-time, accurate information on particle number (PN), lung deposited surface area (LDSA), particle mass (PM) concentrations. The Pegasor AIRam meets the WHO recommendations (global air quality guidelines 2021) for ultrafine particle ...
-
Manufactured by Pegasor Oy (Ltd)based in FINLAND
Pegasor Particle Counter PPC is a complete, stand-alone measurement system for regulatory PN-PTI testing. Powered by the Pegasor G2 particle sensor, the PPC is an easy-to-install system for fast and reliable testing of particle emissions from engine or vehicle tailpipe. The system fulfills all requirements and recommendation set in EU for for measuring particle number concentration from vehicles. ...
-
Manufactured by Airora, Division of Hydroxyl Technologiesbased in UNITED KINGDOM
Airora Personal wearable air purifier is designed to help you breathe cleaner air on the ...
-
Manufactured by Noruco S.L.based in SPAIN
Self- filtering mask in accordance with EU regulation 2016/425 regarding personal protective equipment. Composition: - Product tested and approved in accordance with the UNE-EN 149:2001+A1:2009 standard. ...
-
Manufactured by Brechtelbased in USA
Most particles in the atmosphere take up water when exposed to increasing relative humidity – this often explains the poor visibility during the early morning hours when the relative humidity is high and particles have swollen in size and more effectively scatter solar radiation. When we inhale particles they also grow into water droplets, how large they grow determines where they deposit ...
-
Manufactured by Ionerbased in SPAIN
The PersonalDustMonit unit is an instrument for measuring and registering in continuation particles present in the air. Laser scattering is the method used by PersonalDustMonit for measuring the particles that make up the atmospheric particulate and class them based on their dimensions. Laser scattering allows immediate and continuous measurement of fine particles present in the air both with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you