pollution control system Articles
-
Dixie Cut Stone & Marble chooses Whirl Wet High Efficiency Wet Dust Collector with Low Maintenance and Operating Costs.
Dixie Cut Stone & Marble finishes Indiana limestone for the dimensional stone industry. Dixie management wanted 'best available' dust control technology to maximize both ergonomic and housekeeping benefits. Tri-Mer supplied two Whirl/Wet units with top-mounted blowers. Collected material is discharged manually after settling. The system operates with minimal water consumption and consumes ...
-
Game theory approach for the design of an optimal air pollution control system for thermal power plants
A procedure, based on the concept of game theory, for the optimum design of an air pollution control system in thermal power plants is described. The problem is formulated as a four-criteria optimisation problem, with the cost of the electrostatic precipitator, the cost of the stack, the maximum ground-level concentration of particulate matter and the maximum ground-level concentration of sulfur ...
-
The Oxidizer Permit Protection Myth - White Paper
It is often assumed an air pollution control permit is enough to maintain emission compliance. Unfortunately, that's not the case. EPA is more aggresssively pursuing air pollution control system failures creating millions of dollars in penalities and fines for organizations. Are you ...
-
Boeing Rotorcraft Systems, known today as the Mobility Division of Boeing Military Aircraft, purchased a Fan / Separator fume scrubber system, also a chrome scrubber and four Crossflow scrubbers from Tri-Mer.
The fume scrubber system is dedicated to handling acid fumes generated by a 5-stage alodize system. Tri-Mer’s fume scrubber is a highly efficient, double pack system. It is “all-mechanical,” and operates with 20% less brake horsepower than competitive systems. Fan / Separators scrub corrosive fumes at 1/10th the water required by traditional wet scrubbers. Operational ...
-
Fume Scrubber for Grain Etch, Metal Finishing, and Other Operations Generating Fumes and Gases
World's Largest Investment Casting Company Selects Tri-Mer for Air Pollution Control. Tri-Mer engineered and built air pollution control equipment for Alcoa Howmet's grain etch facility, which houses two process lines. Contaminants include hydrochloric acid, ferric chloride and phosphoric acid. The phosphoric acid line includes a Tri-Mer Vertical Flow (V-F) Scrubber, and 6-stage tank line. The ...
-
Integrated maximum efficiency air pollution control system
A major uranium refiner required an air pollution control system to control emissions from their hazardous incinerator. The presence of radioactive material demanded that outlet emissions approach non-detectable levels. Macrotek was contracted to design and supply the system. Advanced, cutting edge technology was used to design a system with the lowest possible emissions, which has been ...
-
Getting The Most From Air Pollution Control Systems
Today’s air pollution control systems (APCSs) use high-efficiency heat exchangers, natural-gasfired burners, industrial-grade blowers, electric or pneumatic actuators and programmable logic controllers (PLCs) to ensure safe and efficient operation. However, dependable performance and a long life expectancy are contingent on thorough inspections and preventive maintenance at regular intervals. ...
-
Air Pollution Control in the Flexographic Printing Industry
A basic review of technologies used, and selection criteria to consider, to successfully control the VOC/HAP emissions exhausted from flexographic printing presses. Within the flexographic printing industry, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new. Today, because of business expansion, modifications to plant operations, or changes in ...
-
A Case Study For Thermal Treatment Of Fluorinated Hydrocarbon With 15% Wt Hydrofluoric Acid Recovery
This paper is a joint presentation by 3M Specialty Materials and Selas-Linde to describe the thermal treatment technology used to safely destroy Fluorinated Hydrocarbon components generated as a result of fluorination of organic compounds. Thermal treatment of these components results in high concentration of Hydrogen fluoride in the combustion chamber requiring special attention to handling and ...
-
Don’t Let Profits Go Up In Smoke
In today’s competitive economy, few businesses have “money to burn.” For manufacturing companies that installed air pollution control systems more than seven to 10 years ago, though, these older, less efficient systems could literally be “burning money” by operating inefficient electric motors and by allowing large amounts of useable heat energy to bevented directly out the exhaust stacks. ...
-
Clean air unplugged - Case study
If you build it, industry will come.That’s the warm welcome ocean carriers and terminal operators are giving new clean air technology in operation at the Port of Los Angeles. The innovative diesel exhaust treatment system was recently approved as an alternative to shore power for container ships subject to California’s at-berth pollution control regulations. The technology is a ...
-
Air Pollution Control Specs
As the full effect of the federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment. With more than 25 years of proven success in a variety of industries, catalytic and thermal oxidation has become a popular method for controlling volatile organic compound (VOC) and hazardous air ...
-
Understanding Air Pollution Control System Design Specifications
As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many different companies will be required to install new or additional air pollution control equipment. With well over twenty-five years of proven success in a variety of industries, thermal and catalytic oxidation has become a popular method for controlling volatile organic compound (VOC) and ...
-
Regenerative Thermal Oxidizer Installation #1638 An Automotive Parts Manufacturer adds Pollution Control System in Terre Haute, IN - Case Study
An automotive parts manufacturer adds air pollution control with the help of Alliance Corporation. Application: Automotive – Terre Haute, IN Project: A 3,000 SCFM BOXIDIZER™ Regenerative Thermal Oxidizer. Installed by customer. ...
-
Regenerative Thermal Oxidizer Installation #1597 A Southern California Commercial Bakery Adds Air Pollution Control System - Case Study
A commercial bakery adds pollution control with the help of Alliance Corporation. Application: Food Processing – La Habra, CA Project: A 10,000 SCFM KRONUS™ Regenerative Thermal Oxidizer. Installed by Alliance. ...
-
Regenerative Thermal Oxidizer Installation #1636 A Japanese Furnace & Refractory Manufacturer Updates Their Air Pollution Control System - Case Study
A furnace & refractory manufacturer purchases a U.S. made, compact, regenerative thermal oxidizer for air pollution control, via the help of Alliance Corporation. Application: Thermal – Osaka, JAPAN Project: A 3,000 SCFM BOXIDIZER™ 2-Bed Regenerative Thermal Oxidizer. Installed by customer. ...
-
Regenerative Thermal Oxidizer Installation #1597 A Southern California Commercial Bakery Adds Air Pollution Control System - Case Study
A commercial bakery adds pollution control with the help of Alliance Corporation. Application: Food Processing – La Habra, CA Project: A 10,000 SCFM KRONUS™ Regenerative Thermal Oxidizer. Installed by Alliance. ...
-
Regenerative Thermal Oxidizer Installation #1628 A Chinese Optical Wear Manufacturer Adds U.S. Made Air Pollution Control System - Case Study
A Chinese optical wear manufacturer adds best-in-class pollution control with the help of U.S. based Alliance Corporation. Application: Apparel – Guangdong, CHINA Project: A 3,000 SCFM BOXIDIZER™ 2-Bed Regenerative Thermal Oxidizer. Installed by customer. ...
-
Regenerative Thermal Oxidizer Installation #1329 A Protective Film Manufacturer in Moorestown, NJ Adds Highly Efficient Air Pollution Control System - Case Study
An automotive protective film manufacturer replaces pollution control with the help of Alliance Corporation. Application: Converting – Moorestown, NJ Project: A 35,000 SCFM KRONUS™ Regenerative Thermal Oxidizer (RTO). Installed by customer. ...
-
Regenerative Thermal Oxidizer Installation #1593 Chocolate Manufacturer Adds Air Pollution Control System in Le Grand-Quevilly, FRANCE - Case Study
A chocolate manufacturer adds pollution control with the help of Alliance Corporation. Application: Food Processing – Le Grand-Quevilly, FRANCE Project: A 3,000 SCFM BOXIDIZER™ 3-Bed Regenerative Thermal Oxidizer. Installed by customer. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you