Air Pollution Equipment For Air And Climate Available In Africa
-
ShowcaseManufactured by Advanced Cyclone Systems, S. A. (ACS)based in PORTUGAL
Recent adoption of electrostatic recirculation in the same cyclone system has successfully proven to further reduce particle emissions, even in the [1;5]μm particle size range, assuring future regulation compliance, particularly where legal limits are very ...
-
ShowcaseManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Emission Concentrator is an adsorption system designed to concentrate large volume, low concentration process exhaust into a much smaller, higher concentrated air stream. The greatly reduced flow with higher Volatile Organic Compound (VOC) concentration is sent to a thermal or catalytic oxidizer for VOC destruction. The destruction device can then be much smaller in size, significantly ...
-
ShowcaseManufactured by Cerex Monitoring Solutions, LLC.based in USA
Measurements: The UV Sentry is a parts per billion (ppb) to percent level chemical detection and quantification open-path UV-DOAS analyzer. It offers high-performing, time-resolved monitoring of a variety of regulated ...
-
ShowcaseManufactured by Synspec BVbased in NETHERLANDS
Continuous emissions monitoring system (CEMS) for high-range stack measurements. Synspec Delta 116 is a continuous emissions monitoring system (CEMS) built specifically for high-range stack measurements according to US EPA 25A. The analyser provides the sum of all other hydrocarbons in the same measurement cycle for better determination of the total air pollution. The method utilised ensures that ...
-
ShowcaseManufactured by Ecomesurebased in FRANCE
We spend more than 80% of our time indoors. However, indoor air can be up to eight times more contaminated than outdoor ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Permanent Total Enclosures (PTEs) provide numerous advantages for manufacturers who paint, spray, coat or apply solvent based materials to their product. The primary function is to provide 100% capture of all fugitive over-spray of harmful air pollutants used within the enclosure, maximizing the capture and control efficiency of the facility. This results in fewer uncontrolled emissions being ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Monitoring of benzene, toluene, ethylbenzene, xylenes (BTEX) and other hydrocarbons in the ambient air. Synspec GC955 601 gas chromatograph (GC) is built specifically for the measurement of BTEX in ambient air. It can be utilised to simultaneously detect and measure up to 40 different components. The settings of the system can be also customised to include specific components that the client ...
-
PremiumManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
The mobile heavy-duty screener is durable, powerful and with high-performance and a huge capacity. It is capable of screening and separating a wide range of materials in complex and high-demanding applications, such as concrete, asphalt, construction & demolition waste, and quarry, ...
-
Premiumbased in USA
The Clarity Wind Module measures the 2-dimensional horizontal components of wind speed and direction, providing you better insight into where air pollution is coming from - and where it is ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The zero gas generator provides clean and dry zero-level air. It is mainly applied to zero calibration of ambient air quality monitoring system or analyzer. It can also be used as flushing gas in permeation tube & furnace and oxidant gas for FID analyzer. Zero gas generator includes external oil-free air compressor, pressure and flow controller, water removal system. Based on adsorption, ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
CEMS has four basic parts: the dust monitoring subsystem, gaseous pollutants monitoring subsystem, flue gas parameter monitoring subsystem, system control and data acquisition and a processing subsystem. It can monitor SO2, NOx, O2, dust, temperature, pressure, flow rate and other parameters such as HCl, HF, CO, CO2 for specific occasions. After dedusting by sampling probe, tracing by heating ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Mid-range air measurements in cities or near industrial areas. The Alpha 115 Methane/TNMHC Analyser is a gas chromatograph (GC) specifically designed to measure concentrations of greenhouse gas methane in the ambient air. Simultaneously, the analyser provides the sum of all other hydrocarbons in the same measurement cycle for better determination of the total air pollution. The method utilised ...
-
PremiumManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
The Mobile tracked screener provides the end user with a high output of finished products In sand and gravel, aggregate recycling, top soil and coal mining applications. Up to 5 sizes of material can be produced simultaneously, thus giving the user considerable added value. Easy to transport. Quick to set up. Easy to operate and ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The T9400 (100VAC) and the T9400E (200VAC) Series Air Samplers are lightweight, compact, high volume air samplers with a two-stage, thermally protected electric motor driven vacuum blower. The unit is equipped with a mounted on-off switch. The T9400/T9400E Air Samplers are equipped with a 4” (102 mm) standard filter holder. Each unit utilizes a heavy-duty polypropylene plastic ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multigas Sonimix 6000 C2 calibrator is designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, for parameters such as SO2, HC, BTX, CO, NOx and O3. The Sonimix 6000 C2 includes Mass Flow Controllers, GPT, ozone and self re-generable zero air generator and is equipped with – an inlet for high concentration mixtures of diluted ...
-
PremiumManufactured by ESCO International (EI)based in UNITED KINGDOM
Air contaminants that are harmful to human health and the environment are known as Hazardous Air Pollutants (HAP) or Toxic Air Contaminants. ESCO International has developed a range of novel Catalytic Vent gas Destruct Units” ULTRACLEAN” suitable for the destruction of a wide range of industrial toxic gases. Industrial applications include semiconductor, LCD , and petrochemicals. The ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
The Cerex UV SENTRY is an open-path gas analyzer that specializes in sensitive detection of key hazardous emissions such as Benzene and Chlorine over 1000+ meters of fence-line paths. It sets the industry standard for time-resolved, gap-less fugitive emissions and chemical emergency monitoring across fence lines, around process units, and around tank farms. As the most cost-effective solution ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
AM-6 is a small online environmental monitoring system based on high-precision (ppb) gas sensors. The system provides a flexible sensor portfolio and modular design, which can simultaneously monitor various factors such as PM10, PM2 5, S02, N02, 03, CO, VOCs, temperature and humidity in the atmospheric environment, according to the monitoring needs. The system can expand various monitoring ...
-
Premiumbased in USA
The Black Carbon Module is based on the microAeth® Black Carbon measurement technology from AethLabs, and integrates seamlessly into Clarity networks. Use the Black Carbon Module to indicate this extremely harmful component of particulate matter, with impacts ranging from human health to reduced agricultural productivity, and even global warming. ...
-
PremiumManufactured by ERGAbased in TURKEY
Air separation complex for separation of heavy fraction from MSW (glass, stones, metals, bones, etc.) with efficiency up to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you