Air Quality Regulations Applications available in Moldova
-
Premium
Flame Photometer for Measurement of Trace Elements in Biodiesel
These methods are adapted from methods for the determination of sodium and potassium in fatty-acid methyl ester samples. The sample is diluted with an organic solvent (xylene, cyclohexane or petroleum ether) plus a stabiliser. The calibration standards which have a similar matrix to the prepared sample solutions, are prepared from sodium and potassium organometallic salts which are dissolved in a solution of xylene with a stabiliser. These European Standards specify a method for the determination of potassium of ...
By BWB Technologies Ltd. based in Newbury, UNITED KINGDOM.
-
Premium
Flame Photometer for Determination of Na in Biodiesel using Dry Decomposition for Sample Preparation
The sample of biodiesel is weighed into a crucible and placed in a heating muffle furnace. Two temperatures are used in the heating program for the dry decomposition: the first temperature (250ºC) is maintained for 1 hour to dry the sample. After this the temperature is progressively elevated to 600ºC and maintained for 4 hours to eliminate the remaining organic material. ...
By BWB Technologies Ltd. based in Newbury, UNITED KINGDOM.
-
Premium
Flame Photometer for Determination of Sodium in Biodiesel by Flame Atomic
This method allows the analyte to be pre-concentrated in the final solution, decreases the volume of strong acid used in the dissolution stage and does not use organic ...
By BWB Technologies Ltd. based in Newbury, UNITED KINGDOM.
-
Premium
Carbon footprinting calculations for environmental management
With its expertise in calculating and managing emissions data, CERC offers a range of services to assess greenhouse gas emissions, from determining the carbon footprint of a single industrial process, to compiling a greenhouse gas inventory for a whole geographical area. CERC uses methods and emission factors laid out by the Intergovernmental Panel on Climate Change (IPCC). Emissions from transport, industrial, heating and agricultural activities are calculated and stored using the EMIT software ...
By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM.
-
Premium
Direct AA Mercury determination in cosmetics
INTRODUCTION High mercury concentration can be found in such cosmetic products as skin lightening soaps and creams, makeup cleansing products, and mascara. Mercury in cosmetics exists as inorganic and organic compounds. Inorganic mercury (e.g. ammoniated mercury) is used in skin lightening soaps and creams. Organic mercury compounds, such as thiomersal, are used as cosmetic preservatives in makeup cleansing products and ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Compressed air and industrial gases solutions for manufacturing of materials sector
Ensure and improve production capacity using a flow meter in the industry of materials manufaturing. A flow meter show you where, when and how much how you can optimize and thus save ...
By VPInstruments based in Delft, NETHERLANDS.
-
Premium
Direct mercury determination in foodstuff and mixed feed
Introduction: Direct (without any pre-treatment) atomic absorption or atomic fluorescence mercury determination in food and feed is difficult due to complex organic matrix. That is the reason why conventional AFS and AAS methods include sample digestion by acids and require compressed gases such as argon or oxygen. This makes analysis more complicated and costly and extends analysis time. Sample pre-treatment can also increase measurement errors. The use of a RA-915M/RA-915M+ mercury analyzer with a PYRO-915+ ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Air pollution control for the renewable fuels industry
Maintain Uptime and Profit Margins. Anguil’s engineering expertise and flexible solutions hold up to the rugged production demands of ethanol, biofuel and renewable energy facilities. Our solutions are quality engineered so that you can focus on ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Emission control solutions for pyrolisis, incineration and gasification sector
Thermal decomposition processes (TD Processes), such as Pyrolisis, Incineration and Gasification are increasingly related with carbon capture, originated from several sources, from RDF to Biomass. CO2 is not solid and thereby it is impossible for it to be captured or filtered. However, several technologies are emerging for the conversion of biomass to fuels and thereby storing CO2 on a solid form. Bioenergy with carbon capture and storage (so called BECCS) is the process of using biomass, such as trees, crops, or ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Air pollution, emission and process monitoring systems for minerals
ENVEA’s experience of working in the Mineral Industry has led to the development of an extensive range of unique ambient, emission and process monitoring solutions to suit often challenging process conditions. In addition to main stack emission monitoring and measurement, by closely monitoring process conditions such as solids flow, the measurement of material mass via non-intrusive, solid state powder mass measuring systems and proactive baghouse performance monitoring can improve process ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Activated carbons solutions for air and gas treatment industry
Air and Gas Treatment: the Challenge Treatment of air and process gases typically has two fundamental drivers: regulatory compliance and/or product purity. Many industrial operations face increasingly stringent discharge limits on volatile organic compounds (VOCs). From a process purity standpoint, many process gases contain undesired impurities that can be removed with Jacobi’s EcoSorb and AddSorb products. ...
By Jacobi Group based in Kalmar, SWEDEN.
-
Premium
EHS Air Quality Monitoring for Industrial Compliances
Today, many industrial activities have significant environmental aspects. These aspects have environmental impacts that seldom create irreversible damage to mother nature. Lack of process control, irregular maintenance, or over-burdened design considerations give rise to many environmental violations. Air pollution is one key element that is often challenging for the organization to deal with. The absence of real-time air monitoring delays corrective actions and hence, affects the industry’s vision of ...
By Oizom Instruments Pvt. Ltd. based in Ahmedabad, INDIA.
-
Premium
Flame Photometer for Salinity in Processed Foods
Sodium chloride is an essential ingredient of all processed foods; it is needed to enhance flavour and increase shelf life. In many processed foods, additional sodium is added as a flavour enhancer; potassium and calcium are also naturally present but not normally used as processing ...
By BWB Technologies Ltd. based in Newbury, UNITED KINGDOM.
-
Premium
Ambient air quality monitoring solutions for tunnel monitoring
Car tunnels need ventilation in order to keep air pollution below the limits. When the pollution levels reaches a setpoint, the fans must be started and kept running until the pollution levels ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Gas analyzers and monitoring systems for Cement production
Cement is the main ingredient of concrete, which is the most common building material in the world. Cement industry is one of the biggest CO2 emission producers mainly due to the huge production capacities and calcination process, which is an important part of cement production. Cement manufacturers need to monitor these emissions continuously according to local emission regulations. Read about our solutions to the cement ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Flame Photometer for Measurement of Potassium and Sodium in Wine
Wine is of particular interest nutritionally because it is typically low in sodium and relatively high in potassium. Sodium is the predominant cation in breakfast cereals, at levels reaching 8mg/g. Potassium and calcium also vary, particularly in wheat-based products and those enriched with milk products or calcium ...
By BWB Technologies Ltd. based in Newbury, UNITED KINGDOM.
-
Premium
Rapid analysis of total mercury in waste waters and process waters with elevated mercury content using direct pyrolysis technique
Introduction A conventional standard method of total mercury det ermination in water using atomic absorption spectrometry (AAS) involves preliminary sample digestion that ta kes from 30 minutes to 8 hours depending on the digestion conditions. The use of a mercury analyzer RA-915M/RA-915+ with Zeeman background correction in combination with PYRO-915+ pyrolysis attachment provides direct dete rmination of mercury in process and waste waters contaminated with mercury without digesti on or any other sample ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Air pollution, emission and process monitoring systems for agriculture
Working with the industry’s leading manufacturers enables ENVEA to understand specific environmental and process monitoring requirements and the ability to provide an extensive range of ambient, emission and process monitoring systems. A choice of measurement technologies monitor and control key areas of the process including storage, handling, drying activities and dust releases to atmosphere to meet and exceed regulatory environmental obligations and help improve process efficiency. ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Air pollution control for the metal decorating industry
Maintain Production Schedules and Profit Margins. Metal decorators and packagers rely heavily on uptime to maintain profitability. Anguil’s engineering expertise and flexible solutions guarantee compliance and optimized performance so your plant can focus on ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Waste Incineration Application Note
Waste incineration is commonly used to dispose of the organic components of both domestic refuse and hazardous waste by burning it under controlled conditions. The heat generated in this process can be used to generate electricity, a process known as Waste-To-Energy (WTE). Because they have the potential to release highly toxic chemicals, such as polyaromatic hydrocarbons (PAH) and heavy metals, waste incinerators are subject to stringent environmental regulations.Temperature and emissions monitoring equipment ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you