Air Quality Regulations Equipment For Air And Climate In Morocco
-
ShowcaseManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Our flagship model is the i8-1000 line. It took over three years to develop and is at the forefront combustion technology, offering impressive burn rates and large batch sizes while still achieving some of the lowest emissions in its class. The i8-1000 can be customised with external cladding and automatic loading/de-ash to provide an effective and sustainable waste disposal solution for many ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.). With over 20 years experience, Mercury Instruments (part of ENVEA Group) were the first to develop mercury monitors and mercury analyzers using a dry thermocatalytic method instead of wet chemistry. The SM-4 Mercury Monitor is QAL1 certified ...
-
PremiumManufactured by ENVEAbased in FRANCE
The only system allowing the measurement of 1 or 2 independent streams in a single analysis ...
-
Manufactured by Dürr Systems, Inc.based in USA
Dürr provides a comprehensive turnkey approach for producing battery electrode coated materials. Our capabilities cover both ends of the production line, as well as everything in between. We provide systems for raw material handling, slurry mixing and fluid delivery, web handling, coating and drying, solvent recovery and purification, calendering, and ...
-
based in FRANCE
Constructed from carbon or stainless steel to the highest specification, HTV-N Indirect Process Air Heaters provide clean hot air at up to 350°C. The heaters can be fitted with inspection and cleaning doors, condensate drains and water-resistant gaskets where the process demands and utilise specialist welding procedures to reduce the risk of particulate deposits on the heating ...
-
based in FRANCE
The HEB Hot Water Boiler from Babcock Wanson is a high efficiency unit designed primarily for lower temperature process heating applications. With 18 models providing heat outputs of between 90 and 2,300 kW and maximum operating pressures between 5 and 6 barg, the HEB has been designed to operate in a wide variety of industrial ...
-
Manufactured by Dürr Systems, Inc.based in USA
For low-flow process applications, the Oxi.X RM RTO redefines the economics of clean air compliance compared to other VOC control technologies typically deployed in high-flow process ...
-
Manufactured by Dürr Systems, Inc.based in USA
The Oxi.X RC regenerative thermal oxidizer (RTO) from Dürr delivers simplicity and cost-effectiveness. The two-chamber, single-vessel system delivers 99+% VOC destruction and thermal efficiencies up to 97%. When it comes to VOC abatement and managing hazardous air pollutants (HAPs), the Oxi.X RC RTO provides exceptional operating economy. For many applications, the Oxi.X RC RTO will run in a ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.). With over 20 years experience, Mercury Instruments (part of ENVEA Group) were the first to develop mercury monitors and mercury analyzers using a dry thermocatalytic method instead of wet chemistry. The SM-4 Mercury Monitor is QAL1 certified ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 TÜV approved particulate monitor providing high quality emission measurement for low dust concentrations from dry industrial processes including Baghouses and Cartridge ...
-
PremiumManufactured by ENVEAbased in FRANCE
Controller based Gross filter failure detector. Detects significant increases in particulate loading providing warnings of filter media degradation in baghouses and cartridge ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
We can provide a range of accredited, portable or continuous emissions monitoring systems which satisfy both operator and regulatory requirements including the waste incineration directive (WID), large combustion plant directive (LCPD) and the newer industrial emissions directive (IED). These systems are currently operational in a number of key industries including hazardous, clinical, and animal ...
-
PremiumManufactured by ENVEAbased in FRANCE
TUV QAL1 and MCERTS Approved, Stand alone or networked system option Particulate CEM providing high quality emission measurement for dust concentrations from industrial processes. Having a 0–7.5 mg/m³ certification range, the QAL 360 sensor can be used at low or high dust levels meeting the tightened minimum emission limit value of 5 mg/m³ for Large Combustion Plant specified in ...
-
PremiumManufactured by ENVEAbased in FRANCE
Exists in single or dual stream version and “Ultra Low” version for low CO concentration measurements (0-10 to 0-50 ppm) Installed downstream a chiller, controlled at ...
-
PremiumManufactured by ENVEAbased in FRANCE
Offers excellent performance for multigas measurements in dry sampling, including HCl, HF, NO, NO2, N2O, SO2, CO, CH4, TOC, CO2 and ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
FluidScan is a handheld Infrared analyzer for lubricant and grease condition and contamination monitoring. The FluidScan 1000 series handheld Infrared oil analyzer provides direct quantitative measurement of a lubricant’s condition and plays an important role in Machine Condition Monitoring (MCM) for proactive and predictive maintenance in Reliability Management programs. It determines when ...
-
PremiumManufactured by ENVEAbased in FRANCE
Meets the US EPA Performances Standard 12 B mentioned in the US Portland Cement Rules and the new MATS (Mercury and Air Toxics ...
-
PremiumManufactured by ENVEAbased in FRANCE
US EPA PS11 compliant ProScatter™ particulate CEM providing high quality emission measurement for low dust concentrations from industrial processes. Utilising the patented ProScatterTM Forward Scatter measurement technique for measuring particulate concentration levels, typically between 0.06 mg/m3 to 300 mg/m3, this measurement technique offers improved levels of performance which make the ...
-
PremiumManufactured by ENVEAbased in FRANCE
Offers excellent performance for multigas measurements in dry sampling, including HCl, HF, NO, NO2, N2O, SO2, CO, CH4, TOC, CO2 and O2 in process applications or for stack emission compliance. Multi-Gas NDIR-GFC analyzer (Non-Dispersive Infrared Gas Filter Correlation) measuring up to ten gases simultaneously, including Nitrogen Oxide (NO), Nitrogen Dioxide (NO2), Sulphur Dioxide (SO2), Carbon ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
For measurement of the SO2 concentration in gas mixtures. Before maintenance works are carried out it is absolutely necessary to know the gas quality. This special equipment allows precise measurement of SO2 in gas mixtures. Furthermore, this device is very resistant against contamination and SF6 decomposition products and is therefore a reliable instrument for each revision of circuit ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you