Air Sampling Applications available in Jamaica
-
Premium
Total mercury determination in water by CVAAS
Introduction Mercury determination in surface, drinking and waste waters is one of the most popular analyses used for environment pollution and sanitary ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Mercury monitoring for manual analysis of air traps
The Tekran 2600 versatility is evident with the economical and convenient configuration for manual analysis of air samples collected on gold cartridges. Converting the instrument allows calibration by simple injection of gaseous Hg using the Tekran 2505. Once analyzed, the gold cartridges are immediately ready for ...
By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).
-
Premium
Laboratory instruments solutions for environmental industry
The environmental challenges require internationally accepted standards, in which limits and test methods are defined. Metrohm instruments and applications comply with a lot of international environmental standards. Substances introduced into the environment are distributed among the environmental compartments water, soil (sediment), and air, as well as among the organisms living in them (biosphere). Only if we know the type and quantity of these contaminants can we protect the environment and its ...
By Metrohm AG based in Herisau, SWITZERLAND.
-
Premium
Particle Measurement Instruments for Particle Filtration Research
Different types of filters such as fiber filters, membrane filters and fabric filters can be used to remove particles from air flow. The removal of the particles by the filter happens via different mechanism including interception, impaction, diffusion and electrostatic attraction. Typically, the effectiveness of the filter is described with a filtration efficiency value, which is the efficiency of the filter to remove particles from the air flow in percentage (0–100 %). The amount of removed particles by ...
By Dekati Ltd. based in Kangasala, FINLAND.
-
Premium
Emissions Monitoring for Chemical Plants
The Opsis gas monitoring system is designed for monitoring in stacks and gas ducts in chemical industries, both in order to increase plant efficiency and to monitor emissions. The Opsis systems have been internationally approved by e.g. the German TÜV and the U.S. ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Gas monitoring instruments and systems for print factories
Typical modern printing processes utilize solvent-based dyes. The evaporation of the dye solvents into the ambient air during the printing process may expose the workers to various chemicals. Depending on the type of solvents in case, the solvents have different long term exposure limits, which should be obeyed. Component specific measurements are necessary to protect the workers from exposure while avoiding unnecessary interruptions to the printing process from false ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
XRF Spectrometers solutions for alloy analysis sector
Alloy analysis is the process of identification of the chemical composition of the sample. Opposite to PMI (Positive Material Identification), where the alloy grade is determined, it shows the material's whole element composition. The analysis can be carried out by an x-ray fluorescence (XRF) alloy tester, and it is widely used in a variety of industries: from aero-space testing to welding and scrap ...
By Elvatech Ltd. based in Kyiv, UKRAINE.
-
Premium
Flame Photometer for Determination of Na and K using Emulsions and Microemulsions for Sample Preparation
This technique allows use of aqueous standards for calibration rather than relatively unstable organometallic standards and harmful solvents for the extraction. Microemulsions are thermodynamically stable systems composed of water, oil and surfactant. In some cases, an alcohol is added as a ...
By BWB Technologies Ltd. based in Newbury, UNITED KINGDOM.
-
Premium
Air sampling & monitoring systems for environment industry
Researchers and Engineers utilize HI-Q air sampling equipment and systems for analyzing and investigating environments around the world. Data collected by HI-Q air sampling systems have provided critical information in the identification and prevention of pollution. HI-Q offers a line of high volume (TSP-Type) air sampling systems for data collection in perimeter monitoring & industrial emissions monitoring ...
By HI-Q Environmental Products Company, Inc. based in San Diego, CALIFORNIA (USA).
-
Premium
Coriolis Air Sampler for Research and Development
Coriolis air sampler collects biological particles in the air for fundamental research on biological airborne ...
By Bertin Technologies based in Montigny-le-Bretonneux, FRANCE.
-
Premium
Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
As exhaust emissions from engine tailpipe have been decreasing in recent years through development of engines and exhaust after-treatment systems, non-exhaust emissions have become a major contributor to total particle emissions from vehicles. Numerous studies have shown that non-exhaust emissions can equal or even exceed those from the exhaust, and we have a measurement system for both types of emissions. Also, the discussions around Euro 7 emission standards has increased the interest and need for non-exhaust ...
By Dekati Ltd. based in Kangasala, FINLAND.
-
Premium
Air sampling & monitoring systems for universities, colleges & professional schools
HI-Q realizes and supports the efforts of higher education with a variety of air sampling equipment, systems and accessories. Many of instruments are used as teaching aids for future Health Physicists, Radiation Safety Officers, Industrial Hygienist, Environmental Engineers and other industrial ...
By HI-Q Environmental Products Company, Inc. based in San Diego, CALIFORNIA (USA).
-
Premium
Environmental Data Monitoring Solutions for Indoor Air Quality
We spend almost 80% of our time indoors (houses, transport, work/school). Potential sources of pollution are numerous: building and furniture materials, human activity (smoking, cleaning products, DIY, kitchen), outside air and combustion devices. All these sources release different types of harmful chemicals: carbon monoxide, CO2, nitrogen oxides, sulfur oxides, volatile organic compounds (benzene, ketones). ECOMESURE offers instruments that measure the air quality in public areas such as stations, shopping ...
By Ecomesure based in Saclay, FRANCE.
-
Premium
Emissions Monitoring for Cement Plants
Opsis provides state-of-the-art monitoring equipment, fully meeting the high standards of monitoring performance and reliability that the cement industry requires. The Opsis in situ systems are designed to withstand environments with high particulate levels and high ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Determination of the total mercury in a filtrate of wash-off samples from contaminated surfaces
INTRODUCTION Quantitative determination of the total mercury content in filtrates of wash-off samples from the surfaces of walls, floors, equipment, and other facilities of m anufacturing areas is an effective method for the occupational safety ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Air sampling & monitoring systems for fire & police service
Fire service and law enforcement workers frequently face unknown chemical and biological hazards. Internal emergency response personnel must assess the situation before committing a rescue or control team. Today, the Threat of biological agents is real. Accurate situation assessment is of paramount importance when responding to an emergency or control situation. HI-Q’s emergency response air sampling kits have offered Fire and Police emergency response teams a way of recognizing, determining and identifying ...
By HI-Q Environmental Products Company, Inc. based in San Diego, CALIFORNIA (USA).
-
Premium
Air Quality and Noise Monitoring for Roadside Traffic
Vehicular emissions are the major sources of urban pollution and also affect about 55% of the total human population. The emissions from motor vehicles contribute to hazardous pollutants like nitrogen dioxide, carbon monoxide, and suspended particulate matter. These pollutants cause respiratory diseases and increase the chances of life-threatening diseases amongst the ...
By Oizom Instruments Pvt. Ltd. based in Ahmedabad, INDIA.
-
Premium
Air sampling & monitoring systems for occupational health & safety industry
HI-Q considers the responsibility for worker health and safety to be of paramount importance. This is a responsibility that requires good documentation of facts. Many studies are conducted to evaluate workplace health and safety conditions as they relate to workers exposure to radiation, chemicals, and biological hazards during the normal work day. HI-Qs wide line of air sampling equipment, systems and accessories are used in the monitoring then documentation of these ...
By HI-Q Environmental Products Company, Inc. based in San Diego, CALIFORNIA (USA).
-
Premium
XRF Spectrometers solutions for cement analysis industry
The chemical composition of cement plays a crucial role in the determination of its properties as a binder substance. The chemical analysis of cement components is widely used in the cement industry for production optimization and stable high-quality assurance of the final product. High requirements for cement quality are formed by its usage in the fabrication of concrete – the most consumed material in the building ...
By Elvatech Ltd. based in Kyiv, UKRAINE.
-
Premium
Particulate Monitoring
The Opsis SM200 is a combined particulate monitor that can be used for both automatic measurement and filter sampling. It uses 47 mm filters for sampling and beta attenuation of ...
By OPSIS AB based in Furulund, SWEDEN.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you