Air Sampler (Air Sampling) Equipment
-
ShowcaseManufactured by Access Sensor Technologies LLCbased in USA
Our flagship wearable sampler. Collect filter-based air samples on to 37 mm filter media along with extensive sensor data to inform you on motion, compliance, environmental factors, particulate matter, carbon dioxide and tVOC and NOx. Access Sensor Technologies’ UPAS is a compact, filter sampler built around ultrasonic ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The F&J Econoair Plus L-15P personal air sampler consists of a pump contained in a high impact steel fiber filled Lexan, antistatic and RFI/EMI-shielded case, exclusive electronic circuit board for constant flow control (patent pending), an LCD display with 2 lines of 16 characters, a single diaphragm pump mechanism and a rechargeable ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The MiniCapt Mobile Microbial Air Sampler is an innovative, light and mobile air sampler. It simplifies the job of microbial air sampling by applying modern data management capabilities that save time and reduce operator error in air sampling data. The MiniCapt Mobile Air ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The F&J ECONOAIR Premium L-5PTR personal air sampler consists of a pump contained in a high impact steel fiber filled Lexan, antistatic and RFI/EMI-shielded case, exclusive electronic circuit board for constant flow control (patent pending), an LCD display with 2 lines of 16 characters, a single diaphragm pump mechanism and a rechargeable ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The HVP-4000AFC-Series high volume air samplers are housed in a clear-anodized aluminum outdoor shelter. The units incorporate a maintenance-free, two or three stage centrifugal blower powered by a brushless, variable speed, maintenance free motor. Blower selection is dependent upon individual sampling environment. The speed of the ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The ECONOAIR Premium L-12PTR is a low-cost high-performance personal air sampling pump. It is a simple model designed for sampling of asbestos, lead and other airborne contaminates. The rugged compact design features a rechargeable NiMH battery with available one-hour recharger. The L-12PTR can be programmed for timing routine activated ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The F&J Econoair Plus L-5P personal air sampler consists of a pump contained in a high impact steel fiber filled Lexan, antistatic and RFI/EMI-shielded case, exclusive electronic circuit board for constant flow control, an LCD display with 2 lines of 16 characters, a single diaphragm pump mechanism and a rechargeable NiMH battery ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
voltage (12 or 24 volts DC). The CF-24B includes a 1½” female straight pipe fitting which accepts the “CF” series filter holders. See “Air Sampling Accessories” section of this catalog for optional 12/24 Volt DC Portable Power Source (P/N: ...
-
PremiumManufactured by Access Sensor Technologies LLCbased in USA
After many customer requests we have released a custom enclosure for the UPAS v2 and v2+ products. Don't risk your hardware or your data accuracy with a DIY solution. ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The most flexible calibrator design available for laboratory or field use. Mobile venturi tube feature eliminates difficult set up positions during ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The MerPAS® sampler fitted with the yellow body diffusive barrier is best used for sampling outdoor ambient air with highly elevated mercury concentrations (50 ng/m3). This sampler has a thicker diffusive barrier, thereby reducing the effective sampling rate to lessen Hg capture by the device. The sampling time is typically hours up to 7 ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The T8400M (100-120VAC) and the T8400ME (200-240VAC) Series Air Samplers are high volume air samplers with two stage, thermally protected electric motor driven vacuum blowers. The motor driven blower is mounted in a very durable lightweight plastic polypropylene housing, mounted to a sturdy base plate, having non-skid ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model FJ-28BMHT heavy duty hand truck mounted mobile low volume air sampler designed for outdoor use with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 4’ to 7’ above floor level. Model FJ-28BMHT contains a standard rotameter for flow measurements. The air ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
These High Volume Air Samplers are housed in a clear-anodized aluminum outdoor shelter. The Brushless, two or three stage centrifugal fan blower can be used for particulate sampling with either a 4” diameter or 8” x 10” filter paper holder. The blower motor has a variable speed control feature which allows the operator to ...
-
PremiumManufactured by Innovation nilu ASbased in NORWAY
Our new SeSam sequential air sampler is in the final testing stages and is expected to be released in ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model LV-22 is a low volume air sampler consisting of a 1/4 HP oil-less, carbon vane vacuum pump with an air flow regulator for use where a nearly constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model LV-22E is a low volume air sampler consisting of a 1/4 HP oil-less, carbon vane vacuum pump with an air flow regulator for use where a nearly constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model GAS-1 Global Air Sampling System is a microprocessor controlled low-volume air sampler consisting of an oil-less, carbon vane vacuum pump, with a constant airflow regulator for use where a nearly constant airflow is desirable. The regulator holds a constant pressure drop across an in-line venturi by varying the flow through a ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
The Coriolis Compact is a dry Cyclonic air sampler able to operate up to 8 hours straight and compatible with multiple downstream analysis (NGS, qPCR, ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model FJ-28B is counter-top cabinet model, low-volume air sampler with a 1/4 HP oil-less carbon vane vacuum pump, and a constant air flow regulator for use where a near constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you