emissions sampling Equipment available in Missouri

Available in Missouri| Near Missouri
83 Results found

We couldn't find any emissions sampling equipment in Missouri

Here is a list of results available in Missouri

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Air Sampling ×

  • Keyword: emissions sampling ×

  • Available in: USA ×

  • Available in: Missouri ×

Soot-Trak - Real-Time Diesel Soot Mass

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

The Sierra Instruments Soot-Trak laser measures real-time engine soot particle mass emissions and performs characterization of soot particle particle size, primary particle surface area and number. Soot-Trak provides researchers and engine developers the accurate information they require about particle transport. With measurement accuracy of 5% ...

Protea - Filters

by Protea Limited     based in Middlewich, UNITED KINGDOM

Filtering of gas for particulate matter is of great importance to ensure high uptime for gas analysers and sample pumps. With Protea’s experience of process and emissions monitoring of many different applications, we can recommend the best choice of filter material and porosity. With our advanced FTIR gas analysers we are able to source and ...

Protea - Pumps

by Protea Limited     based in Middlewich, UNITED KINGDOM

Protea’s gas analysers are extractive gas analysers and as such we need to ensure repeatable, consistent sample flow is provided to the equipment. The choice of pump is of great importance to ensure high uptime of analytical equipment. Protea can supply low-cost, low flow sample pumps for mobile applications. For sampling of corrosive gases, ...

Microdust - Model Pro - Remote Noise Monitoring System / Remote Dust Emissions Monitoring System

by Casella     based in Kempston, UNITED KINGDOM

Microdust Pro is a rugged, hand-held, data logging instrument for the real-time detection of airborne dusts, fumes and aerosols. A quick, easy to use instrument, giving the user additional qualitative data which cannot be gained by gravimetric air sampling methods alone. This extremely versatile instrument can also be used with a range of ...

Casella - Model Dust Guardian - Dust Monitor

by Casella     based in Kempston, UNITED KINGDOM

DUST Guardian is a system for web-based remote monitoring of dust emissions to ensure compliance with regulatory limits.  Data is ‘pushed’ automatically to a dedicated website using a private login and is accessible in real-time, 24 hours a day, 7 days a week, 365 days a year.

HI-Q - Stack Sampling System Design

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q is ready to help with your stack sampling requirements: State and Federal nuclear regulatory agencies require a stack discharge sampling program as part of the licensing process. Radionuclides discharged to the air in the form of particulate and volatile compounds must be assayed. Therefore, nuclear facilities are required to follow standard ...

HI-Q - Dry Gas Totaling Meters

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q offers a wide range of dry gas totaling meters which, when incorporated in an air sampling system, are an excellent source for recording the total volume of air sampled. The gas-totaling meter may either be connected to have gas supplied through the inlet (connected to the exhaust of a positive displacement pump) or drawn through the outlet ...

Automatic Filter Changers

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

The Sierra Automatic Filter Changer allows the engineer to complete several tests in succession. Our automatic filter changer works seamlessly with the Model BG-3 to fully automate particulate collection to greatly improve testing efficiency and more importantly, testing safety. The system can hold up to 22 (dependent on filter size, 47mm, 70mm, ...

Environnement S.A. - Model HOFI PROBE - Hot Extractive Stack Gas Sampling System

by Environnement S.A     based in Poissy, FRANCE

Hot extractive Stack gas sampling system. Gas sampling system to be connected to heated analyzers( e.g. MIR FT ).


F&J - Model GAS-EDL-300WE - Elite Digital Light (EDL) Global Air Sampling System (220V)

by F&J SPECIALTY PRODUCTS, INC.     based in Ocala, FLORIDA (USA)

F&J Model GAS-EDL-300WE air sampler is a powerful small foot print light weight AC/DC powered air sampling system operable from (1) line power or (2) an optional 24VDC external power source. This powerful air sampler is the lightest weight low volume air sampler available.

CMC SmartCEMS - Model SCSL - Sample Line of PEMS

by CMC Solutions, LLC     based in Farmington Hills, MICHIGAN (USA)

The SmartCEMS Sample Line is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Sample Line will meet the requirements for sampling during model development and PEMS QA activity. The ...

Texas Sampling - Detector Tube Sample System

by Texas Sampling, Inc.     based in Spartanburg, SOUTH CAROLINA (USA)

Texas Sampling, Inc. Detector Tube sample system is used to take a relative emission free sample safely. To do this, our system drops the pressure to 5 PSIG or less. The large cylinder (top right) is used as a low pressure accumulation chamber that the gas flows through. The Drager tube is inserted in the top fitting to the right of the cylinder ...

Simple Mini-Stack-Probe

by Paul Gothe GmbH     based in Bochum, GERMANY

Probe for the use in small scale furnace stacks. System consist of one bent with bent radius 25 mm. Length of the bent as agreed. Entry thread M 12 x 1 mm for mini nozzles (Material: Stainless Steel). Complete with self regulating electrical heater for filter devices, high performance heater cartridge ca. 220 W, 230V, (default settings: 70°C, ...

Neptech Flexotherm - Heated Multiplexers

by Neptech Inc.     based in Highland, MICHIGAN (USA)

Flexotherm manufactures heated multiplexers for use in emissions testing and sampling. Heated multiplexers from Flexotherm allow the user to have total control of gas flow and direction. Our multiplexers help improve testing effciency and accuracy while keeping your operators in control at a safe distance. Each model includes a custom-made heated ...

J.U.M. - Model TJ 100 - Heated Sample Line

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

The model TJ 100 is a Heated Sample Line especially designed for Emissions Applications where hydrocarbons are to be measured. To prevent the forming of hydrocarbon memory effects, (hang up), the end caps are heat resistant to up to 200°C. This allows the sample line to be coupled inside an oven of a heated sample filter and heated FID ...

J.U.M. - Model VE 112WP - Panel Mount Heated Sample Filter and Interface

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

Gas emissions analyzers in CEM’s or as stand alone are often exposed to heavy soot and dust contamination. Therefore it is necessary to filter the sample gas stream.

J.U.M. - Model 2812D - Compact Sample Pump

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

The J.U.M. Engineering 2812D is a very compact sample pump. The 2812D is made of 316 Stainless Steel to withstand normal corrosive gasses as they are present in standard stack gas emission. The drive mechanism is designed for a very smooth, low vibration, silent and continuous operation .

J.U.M. - Model 2812D-HT - Compact, High Temperature Sample Pump

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

The 2812D-HT is a very compact, High Temperature Sample Pump. All parts which come in contact with sample are made of 316 stainless steel to withstand corrosive gasses as they can become present in standard stack gas emission. The drive mechanism has been designed for a very smooth, low vibration, continuous and silent operation. The pump heads ...

J.U.M. - Model 2825PD - Compact Compressor or Sample Pump

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

The J.U.M. Engineering 2825PD is a very compact compressor or sample pump. The 2825PD is made of 316 Stainless Steel with aluminum heads as a compressor or it is made from all stainless steel to be used as a dual or high flow sample pump. In the all stainless version it withstands normal corrosive gasses as they are present in standard stack gas ...

Sample Conditioning Unit

by E Instruments International, LLC     based in Langhorne, PENNSYLVANIA (USA)

The accurate emissions monitoring of soluble gases, present in flue gas from industrial and commercial processes, requires a sampling system designed to prevent significant loses of the SO2 and/or NO2 gases in the sampling lines prior to entering the analyzer or measuring device.

Need help finding the right suppliers?

Let the XPRTs do the work for you