Gas Sampling (Air Sampling) Equipment In Alberta
-
PremiumManufactured by AMS, Inc.based in USA
Easily and economically sample soil gas vapors at shallow depths for preliminary testing. The AMS "original" gas vapor probe can take vapor samples in soils to depths of 12' depending on soil conditions. This kit is an excellent choice for shallow gas vapor sampling in soft soil. The kit includes ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS 6-inches (152mm) Gas Vapor Implant Installation Kit are used for permanent soil gas monitoring, UST monitoring, groundwater sampling, air sparging, vapor extraction monitoring, and as a pressure measurement point in vacuum testing. This kit allows a user to obtain or collect a soil gas sample by positioning ...
-
Manufactured by H2O Logics Inc.based in CANADA
Alita produces one of the highest quality, longest lasting, and quietest linear air pumps. The air pumps are designed to deliver a high volume of steady airflow at low pressure ranges, Alita Linear Air Pumps are of high efficiency, low energy consumption, and perform with low operation noise. With no sliding parts and oil less components, the Alita air pump requires no lubrication and transfer ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 914 is a built-to-order Continuous Emission Monitor (CEM) that includes all the components needed for a compliance monitoring and reporting project. The system uses dry extractive sampling techniques designed to meet government regulations for all types of compliance ...
-
Manufactured by H2O Logics Inc.based in CANADA
Ideal for remote unattended operation, ALITA PVM series linear air pumps can be powered directly with properly sized photovoltaic module(s) for off-grid and remote installations. Pump operation can be completely automated, require no third-party charge controller or power control module. Alita produces one of the highest quality, longest lasting and quietest linear air pumps. The Solar Powered ...
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
The HP5 heated sampling probe is ideal for the determination of particulate matter and chemicals in the gas phase.Its unique design, combined with the clamps-free slide and lock device, allows the probe to freely rotate around its axis, which is needed for the swirl angle determination in accordance with the EN16911 and US EPA M1/2 ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
Slide Hammer, similar to standard 615 installations, for high-resolution vertical groundwater or soil gas ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
The 615 Drive-Point Piezometers are cost-effective for initial site investigations, plume delineations, and as low-cost mini well points. They are excellent for groundwater or soil gas sampling, underground storage tank monitoring, and as sparge points. The stainless steel piezometer point has a 50 mesh screen and a 3/4" NPT riser pipe. An ...
-
Manufactured by SKCbased in USA
Reliability and simplicity make the SKC Sidekick a good entry level pump, whilst high build quality means it won't let you down. Available in three models including two ATEX approved models. All models offer a wide flow range of 5-3000 ml/min, which means the Sidekick is suitable for dust and gas sampling projects. The lower flows are ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
Designed for use in Zone 1 or Zone 2 hazardous areas, the air aspirated system uses a compressed air driven vacuum generator to draw a gas sample from a single point. Explosion- proof gas detectors are fitted to monitor for flammable gases, toxic gases or oxygen. Each detector provides a 4-20mA output. An intrinsically safe flow-fail device ...
-
Manufactured by A+ Corporation, LLC.based in USA
Avenger Particulate & Coalescing Filters provide sample conditioning and analyzer protection by coalescing and removal of liquid droplets, aerosol mist, and solid particles from gas (vapor) streams as well as removal of sticky particles from liquid. A variety of models are available for handling a wide range of gas and liquid ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The HORIBA permeation dryer PS-100E is designed as a compact and portable sample gas conditioning system in combination with the multi-component gas analyzer ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The GA-360E/F360E Series is a line up of units that provide ultrahigh sensitive, highly accurate, continuous monitoring of trace amounts of impurities contained in gases (N2, O2, He, Ar, H2, and Air) used in the semiconductor manufacturing process. Utilizing a cross-modulation method, GA-360E/F360 Series units have no zero drift ...
-
Manufactured by Advanced Micro Instruments, Inc. (AMI)based in USA
The MODEL 1000RS Portable Trace Oxygen Analyzer is the undisputed leader when measuring ppm levels of oxygen in the natural gas industry. Patented innovations and key features are packed into a compact, rugged design. The patented ELIMINATOR CELL BLOCK™ and sensor technology combination produce an incredibly fast and reliable ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The APHA-370 continuously monitors atmospheric THC, NMHC, and CH4 concentrations using a cross-flow modulated selective combustion type method combined with a hydrogen ion detection method. The APHA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you