gas sampling system Equipment available in Mozambique

Available in Mozambique| Near Mozambique
99 Results found

We couldn't find any gas sampling system equipment in Mozambique

Here is a list of results available in Mozambique

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Air Sampling ×

  • Keyword: gas sampling system ×

  • Available in: Africa ×

  • Available in: Mozambique ×

Environnement S.A. - Model HOFI PROBE - Hot Extractive Stack Gas Sampling System

by Environnement S.A     based in Poissy, FRANCE

Hot extractive Stack gas sampling system. Gas sampling system to be connected to heated analyzers( e.g. MIR FT ).

Interceptor Gas Sampling System

by Parker PGI     based in Houston, TEXAS (USA)

Least expensive & most reliable direct mount flow proportional sampler. Two-year Limited Warranty. On-Line Serviceability. User-friendly Electronic Control. Compatible with All Flow Computers. Direct or Remote Mounted. Vacuum to 1480 PSIG. 0.025 TO 0.5CC Bite Size.

MiniGASS - Model 1228W - Wall Mount Gas Sampling System

by Perma Pure LLC     based in Lakewood, NEW JERSEY (USA)

MG-1228W Wall Wall mounted Mini-GASS system incorporates all the features of the std MG-1228 along with a heated probe filter, heated blowback and probe in a NEMA 4X fiberglass enclosure.

GDS - Model 305 - Sequential Gas Sampling System 1-48 Way

by GDS Technologies Ltd.     based in West Yorkshire, UNITED KINGDOM

Sequential Gas Sampling System 1-48 Way; 1-48 sample points.Monitor up to 8 gas types. No sample line purge delay. Wide range of sensor types. 4 line alpha/numeric display. Selectable sample line sequence. Display of each sample line location. Easily installed and maintained. Full indication of all operations. Event logging / Modbus / RS232 / ...

Protea - Filters

by Protea Limited     based in Middlewich, UNITED KINGDOM

Filtering of gas for particulate matter is of great importance to ensure high uptime for gas analysers and sample pumps. With Protea’s experience of process and emissions monitoring of many different applications, we can recommend the best choice of filter material and porosity. With our advanced FTIR gas analysers we are able to source and ...

Protea - Pumps

by Protea Limited     based in Middlewich, UNITED KINGDOM

Protea’s gas analysers are extractive gas analysers and as such we need to ensure repeatable, consistent sample flow is provided to the equipment. The choice of pump is of great importance to ensure high uptime of analytical equipment. Protea can supply low-cost, low flow sample pumps for mobile applications. For sampling of corrosive gases, ...

GDS - Model 306 - Sequential Gas Sampling System 1-20 Way

by GDS Technologies Ltd.     based in West Yorkshire, UNITED KINGDOM

The GDS 306 system is designed to monitor gas levels from a number of sample-points, targeted at situations where the positioning of conventional gas sensors may not be practical. This may be due to equipment security, cable routing, access for detector head installation/maintenance, harsh environment or a cost effective means of monitoring ...

HI-Q - Dry Gas Totaling Meters

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q offers a wide range of dry gas totaling meters which, when incorporated in an air sampling system, are an excellent source for recording the total volume of air sampled. The gas-totaling meter may either be connected to have gas supplied through the inlet (connected to the exhaust of a positive displacement pump) or drawn through the outlet ...

HI-Q - Gas Sampling & ISO-Kinetic Sampling Probes

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Products Company's product line includes complete stack sampling systems, consisting of a specified type of probe, in-line filter holder, the transport line, sampling pump and flow controller. We recommend, design, and supply complete systems. HI-Q Environmental Products Company is able to make stack-sampling systems design ...

Protea - Model Solus Multipoint - TDLAS Gas Analyser Platform

by Protea Limited     based in Middlewich, UNITED KINGDOM

For a complete transportable measurement solution of up to 10 sample points, the Solus Multipoint analyser is ideal for ambient air and livestock monitoring applications. Using a proven TDLAS sensor, the Solus Multipoint is combined with integrated sampling system for 10 sample points within the one transportable case. A 10-way valve manifold ...

Gasmet - Multipoint Sampling System (MSS)

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The MSS is designed for continuous monitoring of multiple measuring points. It’s designed to work as an integral part of the FCX measuring system. The MSS is used for on-line measurements. It is an ideal tool to measure components of interest in ambient conditions from several measuring points. The sample pump, valves, filter and sample ...

HI-Q - Stack Sampling System Design

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q is ready to help with your stack sampling requirements: State and Federal nuclear regulatory agencies require a stack discharge sampling program as part of the licensing process. Radionuclides discharged to the air in the form of particulate and volatile compounds must be assayed. Therefore, nuclear facilities are required to follow standard ...

IONICON - Nosespace Air Sampling Extension (N.A.S.E.)

by Ionicon Analytik Ges.m.b.H.     based in Innsbruck, AUSTRIA

A heated device for efficient real-time collection of nosespace air samples and introduction into a PTR-MS inlet system. In food, flavor and fragrance science, panelists smell or taste products and a scientist would like to directly measure what the panelist tastes with an quantitative, real-time method such as PTR-MS. For the direct introduction ...

Cerex - Model SPP100 - Gas Sample Conditioner

by Cerex Monitoring Solutions, LLC.     based in Atlanta, GEORGIA (US) (USA)

ETG permeation sample conditioning systems are designed to prepare hot gas sample streams for high flow, high performance gas monitoring applications. The ETG permeation system will remove particulates, mists & water vapor from a gas stream without the loss of analyte gasses.

AGT - Model MAK 10-2 - Sample Gas Conditioning Systems

by AGT Thermotechnik GmbH & Co.KG     based in Erkelenz, GERMANY

MAKs are compressor coolers for highest demands of sample gas quality.  With optional components (pre-separator, filter, flowmeter, acid dosage, humidity sensor, sample gas pump) you can upgrade MAK sample gas coolers to complete integrated sample gas conditioning systems. The flexible, modular design ensures optimal compatibility to all ...

AGT - Model MAK 10-1-TF1-EC1-FM1 - Sample Gas Conditioning Systems

by AGT Thermotechnik GmbH & Co.KG     based in Erkelenz, GERMANY

1 Gas path (PTFE/PVDF). 125 Nl/h per gas path. 1 condensate pump, 1 filter, 1 flowmeter. 1 Electronic control, 3-pole MAK-alarm-contact. Wall-mount housing, mobile version.

Model CO-FA-(XX) Series - Flow Adapters

by Environmental Supply Company, Inc.     based in Durham, NORTH CAROLINA (USA)

The CO-FA-(XX) Flow Adapters convert a Method 5 metering console for low flow or controlled flow applications with the aid of these simple flow control devices.  The adapter is placed between the low flow umbilical and the sample inlet of the Method 5 console. (click on image to enlarge)

NISKIN-X - Model 1010X - External Spring Water Sampler

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

1010X External Spring Water Sampling Bottles Now you can have the simplicity and reliability of a Niskin water sampler and have a completely unobstructed sample chamber. The new Niskin X utilizes stainless steel external spring closures. The Niskin X Water Sampler can be activated by the GO Devil Messenger (1000-MG) when individually or serially ...

Model M26-S1-H - Method 26 (HCL) Sampling System

by Environmental Supply Company, Inc.     based in Durham, NORTH CAROLINA (USA)

The M26-S1-H Method 26 (HCL) Sampling System is for the determination of hydrogen chloride emissions from stationary sources. The sampler comes with miniature impingers, heated probe assembly, and a modular clamshell oven.  Add to the sampler the Environmental Supply UNI-VOS-ACD Low Flow Control Console to make the system complete

J.U.M. - Model VE 112WP - Panel Mount Heated Sample Filter and Interface

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

Gas emissions analyzers in CEM’s or as stand alone are often exposed to heavy soot and dust contamination. Therefore it is necessary to filter the sample gas stream.

Related Terms for gas sampling system

Need help finding the right suppliers?

Let the XPRTs do the work for you