particulate sampling Equipment available in Congo

Available in Congo| Near Congo
112 Results found

We couldn't find any particulate sampling equipment in Congo

Here is a list of results available in Congo

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Air Sampling ×

  • Keyword: particulate sampling ×

  • Available in: Africa ×

  • Available in: Congo ×

Automatic Filter Changers

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

The Sierra Automatic Filter Changer allows the engineer to complete several tests in succession. Our automatic filter changer works seamlessly with the Model BG-3 to fully automate particulate collection to greatly improve testing efficiency and more importantly, testing safety. The system can hold up to 22 (dependent on filter size, 47mm, 70mm, ...

Westech - Model M9096 - Particulate Sampling Train

by Westech Scientific Instruments (Westech)     based in Upper Stondon, UNITED KINGDOM

The M9096 In-Stack Manual Method Particulate Sampler for ISO9096, EN13284-1, US EPA Method 17

HI-Q - Model PM-10 - Sampling Inlet

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Products Company's High Volume PM-10 Size Selective Inlet samples suspended particulate in the air at a flow rate of 40 CFM through its omnidirectional head. The air is then accelerated through multiple internal nozzles toward a greased collection plate. Due to their larger momentum, particles greater than 10 microns cannot ...

HI-Q - Model PM-2.5 - Sampling Inlet with Filter Holder

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Products Company's, EPA Designed, PM-2.5 Sample inlet operates on the same principles of particulate impaction as the PM10-INLET described above. Air is drawn into the omnidirectional inlet head at a flow rate of 16.67 LPM. The air is then accelerated toward the first impaction stage where particulate with aerodynamic diameters ...

HI-Q - Kinetic Impactor Inlets

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Products Company's AK-Series adjustable Annular Kinetic Impactor Heads are designed for collecting alpha, beta, & gamma-emitting contaminants, plutonium fission, Radon decay products and size specific dust particles. By adjusting the stopping distance (nozzle to impactor plate distance) and varying the particle velocities an ...

Protea - Filters

by Protea Limited     based in Middlewich, UNITED KINGDOM

Filtering of gas for particulate matter is of great importance to ensure high uptime for gas analysers and sample pumps. With Protea’s experience of process and emissions monitoring of many different applications, we can recommend the best choice of filter material and porosity. With our advanced FTIR gas analysers we are able to source and ...

HI-Q - Stack Sampling System Design

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q is ready to help with your stack sampling requirements: State and Federal nuclear regulatory agencies require a stack discharge sampling program as part of the licensing process. Radionuclides discharged to the air in the form of particulate and volatile compounds must be assayed. Therefore, nuclear facilities are required to follow standard ...

HI-Q - Gas Sampling & ISO-Kinetic Sampling Probes

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Products Company's product line includes complete stack sampling systems, consisting of a specified type of probe, in-line filter holder, the transport line, sampling pump and flow controller. We recommend, design, and supply complete systems. HI-Q Environmental Products Company is able to make stack-sampling systems design ...

OPSIS - Model SM200 - Beta-Attenuation Particulate Monitor / Gravimetric Sampler

by Enviro Technology Services plc     based in Stroud, UNITED KINGDOM

The SM200 is an automatic particulate monitor for monitoring of PM10 and PM2.5. A filter is loaded into the filter magazine and a Geiger counter detects the beta attenuation before and after sampling. The response time of the instrument is 1–24 hours.

HI-Q - Dry Gas Totaling Meters

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q offers a wide range of dry gas totaling meters which, when incorporated in an air sampling system, are an excellent source for recording the total volume of air sampled. The gas-totaling meter may either be connected to have gas supplied through the inlet (connected to the exhaust of a positive displacement pump) or drawn through the outlet ...

Cerex - Model SPP100 - Gas Sample Conditioner

by Cerex Monitoring Solutions, LLC.     based in Atlanta, GEORGIA (US) (USA)

ETG permeation sample conditioning systems are designed to prepare hot gas sample streams for high flow, high performance gas monitoring applications. The ETG permeation system will remove particulates, mists & water vapor from a gas stream without the loss of analyte gasses.

IC Control - Model 521 - 316 SS Industrial Process Sampler

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

We understand your need for a clean, representative, trouble-free sample for your on-line process monitors. Conventional filtering techniques accumulate dirt particles on the filter media until the media clogs and is replaced. The tangential filtration technique used in the model 521, however, passes virtually all of the particulate through the ...

Sabio - Model 1002/1004 - Heated Sample Manifolds

by Sabio Instruments, a division of Sutron Corporation     based in Georgetown, TEXAS (USA)

Collecting and distributing homogenous ambient air samples for gas analysis is easy with the Sabio Model 1002 and 1004 heated Sample Manifolds. Able to work equally well in dry or humid and salty environments, the manifold is well-suited for collecting reactive air toxic data.

HI-Q - Model PM-10 Series - High Volume Air Sampling Systems

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The EPA Clean Air Act of 1987 established a measuring standard to evaluate and monitor the health effects of thoracic inhaleable particles. The standard was set that in order for an environment to be healthy, in terms of these particles, it must have a concentration of less than 150 mg/m3 of particles with aerodynamic diameters less than 10 ...

HI-Q - Model VS23-Series - Continuous Duty, Constant Flow Air Sampling Systems

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The VS-Series Air Sampling Systems can be either incorporated as the primary vacuum source in air monitoring instrumentation or used in conjunction with filter holders and filter media for the collection of particulate and/or gaseous constituents. The systems are furnished complete with a shock mounted base motor/pump, carrying handle, heavy duty ...

Ecotech - Model MicroVol 1100 - Low Volume Air Sampler

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The MicroVol 1100 low volume air sampler provides a flexible sampling platform for PM10, PM2.5 or TSP particulates and basic meteorological parameters.

Ecotech - Model HiVol 3000 PUF - High Volume Air Sampler

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The HiVol 3000 PUF Sampler provides a flexible platform for sampling organic compounds and monitoring basic meteorological parameters. The PUF utilises poly-urethane foam (PUF) to trap organic vapors in addition to collecting particulate matter and store it in a sterile environment for later analysis.

Ecotech - Model HiVol 3000 - High Volume Air Sampler

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The HiVol 3000 particulate sampler performs remote unattended sampling of PM2.5, PM10 or TSP along with basic meteorological parameters. The HiVol 3000 incorporates advanced programming functions and electronic volumetric flow control to maintain a consistent flow and collect a truly representative sample of particulate matter. Optional ...

Cellulose Depth Filters

by SKC Inc.     based in Eighty Four, PENNSYLVANIA (USA)

100% pure, ashless Cellulose Depth Filters are ideal for gravimetric sampling methods and are available in Type 40 (quantitative) and Type 4 (qualitative).tion medium. Two models of the BioStage Impactor are available to accommodate two different flow rates.

Ecotech - Model HiVol 3000 XAD - High Volume Air Sampler

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The HiVol 3000 XAD Sampler provides a flexible platform for sampling organic compounds and monitoring basic meteorological parameters. The XAD sampler collects a wider variety of compounds (than a PUF sampler) on a hydrophobic polyaromatic resin (XAD).

Need help finding the right suppliers?

Let the XPRTs do the work for you